MABACT0066 Transformer, 4:1 transmission line 5 to 1000 MHz Schematic Features • • • • • • • M/A-COM Products Released, Rev. V1 Surface mount 4:1 Impedance ratio Excellent amplitude and phase balance Can be used in both 50Ω and 75Ω systems 260°C reflow compatible RoHS* compliant and Pb free Available on tape and reel. Description M/A Com’s MABACT0066 is a 4:1 RF flux coupled step up transformer in a low cost, surface mount package. Ideally suited for broadband CATV Broadband applications. Case style: SM-138 Pin configuration Dimensions in inches [mm] Tolerance: .xx ± .02, .xxx ± .010, unless otherwise stated Pin no. Function 1 Secondary dot (Output 1) 2 Centre tap (Ground) 3 Secondary (Output 2) 4 Primary (Input) Part number Description 5 Primary dot (Ground) MABACT0066 2000 piece reel MABA-007968-CT66TB Customer Test Board Ordering information Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MABACT0066 Transformer, 4:1 transmission line 5 to 1000 MHz M/A-COM Products Released, Rev. V1 Electrical Specifications: TA = 25°C, Z0 = 50Ω, Pin = 0dBm Parameter Test Conditions Units Min Typ Max Insertion Loss 1 5 - 50 MHz 50 - 879 MHz 879 - 1000 MHz dB dB dB - 1.5 1.0 1.5 2.0 1.5 2.0 Amplitude Unbalance (Nominal 0dB) 5 - 1000 MHz dB - ±0.25 ±0.5 Phase Unbalance (Nominal 180º) 5 - 500 MHz 500 - 1000 MHz º º - ±4 ±8 ±8 ±12 Absolute maximum ratings 2 Parameter Absolute maximum Max input power 250mW DC current 120mA Operating Temperature -40°C to +85°C Storage Temperature -40°C to +85°C ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MABACT0066 Transformer, 4:1 transmission line 5 to 1000 MHz M/A-COM Products Released, Rev. V1 Typical Performance Curves: TA = 25°C, Z0 = 50Ω, Pin = 0dBm Insertion Loss 2: through pin 4 to pin 3 Insertion Loss 1: coupled pin 4 to pin 1 0.0 -0.5 -0.5 -1.0 -1.0 dB dB 0.0 -1.5 -1.5 -2.0 -2.0 -2.5 -2.5 -3.0 -3.0 5 171 337 502 668 834 5 1000 171 337 Amplitude Balance Phase Balance 0.6 190 0.4 188 186 0.2 184 182 Degrees dB 668 834 1000 834 1000 Frequency (MHz) Frequency (MHz) 0.0 -0.2 180 178 176 174 -0.4 172 170 -0.6 5 171 337 502 668 Frequency (MHz) 3 502 834 1000 5 171 337 502 668 Frequency (MHz) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.