LM101A - LM201A LM301A SINGLE OPERATIONAL AMPLIFIER .. .. INPUT OFFSET VOLTAGE INPUT BIAS CURRENT INPUT OFFSET CURRENT SLEW RATE AS INVERTING AMPLIFIER LM101A LM201A 0.7mV LM301A 2mV 25nA 70nA 1.5nA 2nA 10V/µs 10V/µs N DIP8 (Plastic Package) DESCRIPTION The LM101A is a general-purpose operational amplifier which offers many features : supply voltages from ±5V to ±22V, low current drain, overload protection on the inputand output,no latch-up when the common-mode range is exceeded, free from oscillations and compensationwith a single 30pFcapacitor. It has advantages over internally compensated amplifiers in that the compensation can be tailored to the particular application : slew rate of 10V/µs and bandwidth of 3.5MHz can be easily achieved. D SO8 (Plastic Micropackage) ORDER CODES Part Number Temperature Range Package LM101A -55 C, +125 C N • LM201A -40oC, +105oC • • • • LM301A o o o o 0 C, +70 C D • Example : LM201AN PIN CONNECTIONS (top view) October 1995 1 8 2 7 3 6 4 5 1 - Balance - compensation 1 2 - Inverting input 3 - Non-inverting input 4 - VCC5 - Balance 6 - Output 7 - VCC+ 8 - Compensation 2 1/11 LM101A - LM201A - LM301A SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol Vcc Parameter LM101A Supply Voltage Vid Differential Input Voltage Vi Input Voltage LM201A ±22 LM301A ±30 N Suffix D Suffix Unit V V ±15 V 500 300 mW Ptot Power Dissipation Toper Operating Free Air Temperature Range -55 to +125 -40 to +105 0 to +70 o Tstg Storage Temperature Range -65 to +150 -65 to +150 -65 to +150 o Output Short-circuit Duration 2/11 Infinite C C LM101A - LM201A - LM301A ELECTRICAL CHARACTERISTICS LM301A 0oC < Tamb < +70oC LM201A -40oC < Tamb < +105oC LM101A -55oC < Tamb < +125oC Symbol Vio DV io Iib Iio DIio Avd SVR ICC Vicm CMR IOS ±VOPP ±5V ≤ VCC ≤ ±20V ±5V ≤ VCC ≤ ±20V ±5V ≤ VCC ≤ ±20V C1 = 30pF C1 = 30pF C1 = 30pF LM101A - LM201A Parameter Min. Max. 0.7 LM301A Typ. Max. 2 3 2 7.5 10 3 15 6 30 Input Bias Current o Tamb = +25 C Tmin. ≤ Tamb ≤ Tmax. 25 75 100 70 250 300 Input Offset Current o Tamb = +25 C Tmin. ≤ Tamb ≤ Tmax. 1.5 10 20 2 50 70 Input Offset Current Drift o 25 C ≤ Tamb ≤ Tmax. Tmin. ≤ Tamb ≤ Tmax. 10 20 100 200 10 20 300 600 Input Offset Voltage (RS ≤ 10kΩ) o Tamb = +25 C Tmin. ≤ Tamb ≤ Tmax. Typ. o µV/ C nA nA pA/oC Large Signal Voltage Gain * (VO ≤ 10V, RL = 2kΩ) o Tamb = +25 C Tmin. ≤ Tamb ≤ Tmax. V/mV 50 25 100 25 15 100 dB Supply Voltage Rejection Ratio (RS ≤ 10kΩ) o Tamb = +25 C Tmin. ≤ Tamb ≤ Tmax. 80 80 Supply Current, no load Tamb = +25oC Tmin. ≤ Tamb ≤ Tmax. 96 70 70 96 mA 1.8 Input Common Mode Voltage Range (VCC = ±20V) Tamb = +25oC Tmin. ≤ Tamb ≤ Tmax. 3 3 1.8 3 3 V ±15 ±15 ±15 ±15 dB Common-mode Rejection Ratio (RS ≤ 10kΩ) Tamb = +25oC Tmin. ≤ Tamb ≤ Tmax. 80 80 96 Output Short-circuit Current * o Tamb = +25 C 10 30 12 10 12 10 14 13 Tmin. ≤ Tamb ≤ Tmax. Unit mV Input Offset Voltage Drift Tmin. ≤ Tamb ≤ Tmax. Output Voltage Swing * Tamb = +25oC Min. 70 70 96 10 30 12 10 12 10 14 13 mA 50 50 V RL RL RL RL = = = = 10kΩ 2kΩ 10kΩ 2kΩ 3/11 LM101A - LM201A - LM301A ELECTRICAL CHARACTERISTICS (continued) Symbol SR tr KOV Parameter Slew Rate (Vi = ±10V, RL =2kΩ, CL= 100pF, o Tamb = 25 C, unity gain) - (note 1) * 0.5 Typ. 0.25 0.5 5 5 Gain Bandwidth Product * (Vi = 10mV, RL = 2kΩ, C L= 100pF, f = 100kHz, Tamb = 25oC) Total Harmonic Distortion (f = 1kHz, AV = 20dB, RL =2kΩ, VO = 2VPP, o CL = 100pF, Tamb = 25 C) Equivalent Input Noise Voltage (f = 1kHz, Rs = 100Ω) Max. Unit V/µs Overshoot (V i = 20mV, RL = 2kΩ, CL = 100pF, o Tamb = 25 C, unity gain) Output Resistance * µs % 1.5 4 1.5 75 4 75 MΩ Ω MHz 0.5 1 0.5 1 % 0.015 0.015 25 25 Notes : 1. May be i mproved up to 10V /µs in invert ing ampli fier configuration * => V CC = ±15V T amb = +25 o C (unl ess ot herwise speci fied) 4/11 LM301A Min. 0.3 Input Impedance * en 0.25 Max. 0.3 Zi THD Typ. Rise Time (Vi = ±20µV, RL = 2kΩ, CL = 100pF, Tamb = 25oC, unity gain) * Ro GBP LM101A - LM201A Min. nV √ Hz LM101A - LM201A - LM301A 5/11 LM101A - LM201A - LM301A SINGLE POLE COMPENSATION 6/11 FEED FORWARD COMPENSATION LM101A - LM201A - LM301A 7/11 LM101A - LM201A - LM301A 8/11 LM101A - LM201A - LM301A 9/11 LM101A - LM201A - LM301A PACKAGE MECHANICAL DATA 8 PINS - PLASTIC DIP Dim. Millimeters Min. A a1 0.51 B 1.15 b 0.356 b1 0.204 Typ. 3.32 Min. Typ. 0.131 0.045 0.065 0.55 0.014 0.022 0.304 0.008 0.012 7.95 9.75 0.430 0.313 0.384 e 2.54 0.100 e3 7.62 0.300 e4 7.62 Z 0.300 6.6 i L 0260 5.08 3.18 Max. 0.020 10.92 F 10/11 Max. 1.65 D E Inches 3.81 1.52 0.200 0.125 0.150 0.060 LM101A - LM201A - LM301A PACKAGE MECHANICAL DATA 8 PINS - PLASTIC MICROPACKAGE (SO) Dim. A a1 a2 a3 b b1 C c1 D E e e3 F L M S Min. Millimeters Typ. 0.1 0.65 0.35 0.19 0.25 Max. 1.75 0.25 1.65 0.85 0.48 0.25 0.5 Min. Inches Typ. 0.026 0.014 0.007 0.010 Max. 0.069 0.010 0.065 0.033 0.019 0.010 0.020 0.189 0.228 0.197 0.244 0.004 o 45 (typ.) 4.8 5.8 5.0 6.2 1.27 3.81 3.8 0.4 0.050 0.150 4.0 1.27 0.6 0.150 0.016 0.157 0.050 0.024 o 8 (max.) 1995 SGS-THOMSON Microelectronics – Printed in Italy – All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. 11/11 ORDER CODE : Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical componen ts in life support devices or systems without express written approval of SGS-THOMSON Microelectronics.