SMT Power Inductor SISH83 Type Features RoHS compliant. Low profile (3.0mm max. height) SMD type. Unshielded, suitabel for high density mounting. High energy storage and low DCR. Provided with embossed carrier tape packing. Ideal for power source circuits, DC-DC converter, DC-AC inverters inductor application. In addition to the standard versions shown here, customized inductors are available to meet your exact requirements. Mechanical Dimension: RECOMMENDED PAD PATTERNS 3.5 B 3.5 F C UNIT:mm/inch A = 12.94 / 0.510 Max. B = 9.4 / 0.370 Max. C = 3.0 / 0.118 Max. D = 7.7 0.2 / 0.303 0.008 E = 2.5 0.2 / 0.098 0.008 F = 2.5 0.2 / 0.098 0.008 E 14.0 7.0 D A Electrical Characteristics: 25 C: 100KHz, 0.1V o PART NO. SISH83 - 100 L1 (uH) 10 ( DCR )MAX 0.090 Isat 2 (Adc) Ir 3 (Adc) 2.4 2.00 SISH83 - 150 15 0.120 2.0 1.50 SISH83 - 200 22 0.190 1.6 1.30 1000.00 102 681 471 331 SISH83 - 330 33 0.250 1.4 1.10 221 SISH83 - 470 47 0.320 1.0 0.80 151 101 680 68 0.550 0.9 0.70 100 0.700 0.7 0.60 SISH83 - 151 150 1.000 0.6 0.50 SISH83 - 221 220 1.600 0.5 0.40 SISH83 - 331 330 2.200 0.4 0.30 SISH83 - 471 470 3.300 0.3 0.20 SISH83 - 681 680 4.400 0.2 0.10 SISH83 - 102 1000 7.000 0.1 0.05 100.00 INDUCTANCE (uH) SISH83 - 680 SISH83 - 101 470 330 220 10.00 150 100 6R8 4R7 3R3 2R7 2R2 1R5 1.00 1R0 R68 R33 0.10 0.10 1.00 10.00 CURRENT (A) 1. Tolerance of inductance: 20%. 2. Isat is the DC current which cause the inductance drop less than 10% of its nominal inductance without current. 3. Ir is the DC current which cause the surface temperature of the part increase less than 45oC. 4. Operating temperature : -20oC to 105oC (including self-temperature rise) DELTA ELECTRONICS, INC. (TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C. TEL: 886-3-3591968; FAX: 886-3-3591991 http://www.deltaww.com 74 100.00