SHD126236 SHD126236P SHD126236N SHD126236D SENSITRON _____ SEMICONDUCTOR TECHNICAL DATA DATA SHEET 314, REV. C SCHOTTKY RECTIFIER Ultra Low Reverse Leakage 200°C Operating Temperature Applications: • Switching Power Supply • Converters • Free-Wheeling Diodes • Polarity Protection Diode Features: • • • • • • • • Ultra low Reverse Leakage Current Soft Reverse Recovery at Low and High Temperature Very Low Forward Voltage Drop Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Out Performs 200 Volt Ultrafast Rectifiers Maximum Ratings: Characteristics Peak Inverse Voltage Max. Average Forward Current Max. Peak One Cycle NonRepetitive Surge Current Max. Junction Temperature Max. Storage Temperature Symbol VRWM IF(AV) IFSM TJ Tstg Condition 50% duty cycle, rectangular wave form 8.3 ms, half Sine wave (1) - Max. 200 16 Units V A 75 A -65 to +200 -65 to +200 °C °C Max. 1.01 0.85 0.1 Units V V mA 1.0 mA 300 pF 16 nsec 2.82 °C/W Electrical Characteristics: Characteristics Max. Forward Voltage Drop Max. Reverse Current Symbol VF1 VF2 IR1 IR2 Max. Junction Capacitance CT Max. Reverse Recovery Time trr Max. Thermal Resistance (per leg) RθJC Condition @ 15A, Pulse, TJ = 25 °C @ 15A, Pulse, TJ = 125 °C @VR = 200V, Pulse, TJ = 25 °C @VR = 200V, Pulse, TJ = 125 °C @VR = 5V, TC = 25 °C fSIG = 1MHz, VSIG = 50mV (p-p) IF = 0.5A, IR = 1.0A, IRM = 0.25 A, TJ = 25°C - © 2002 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 • www.sensitron.com • [email protected] SHD126236 SHD126236P SHD126236N SHD126236D SENSITRON TECHNICAL DATA DATA SHEET 314, REV. C Mechanical Dimensions: In Inches / mm .150 (3.81 Dia. .140 3.56) .665 (16.89 .645 16.38) .537 (13.64 .527 13.39) 1.132 (28.75 1.032 26.21) 1 2 .035 (0.89 .025 0.63) 3 Places 2 .045 (1.14 .035 0.89) .430 (10.92 .410 10.41) TO-257 3 .100(2.54) BSC 2 Places SINGLE 1 .200 (5.08 .190 4.82) .420 (10.67 .410 10.41) .120(3.05) BSC COMMON CATHODE 3 1 2 COMMON ANODE 1 2 3 PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) DUAL RECTIFIER, DOUBLER (D) 3 DOUBLER 1 PIN 1 CATHODE ANODE 1 CATHODE 1 ANODE 2 3 PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/CATHODE PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE © 2002 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 • www.sensitron.com • [email protected] SENSITRON TECHNICAL DATA DATA SHEET 314, REV. C Typical Reverse Characteristics Typical Forward Characteristics Instantaneous Reverse Current - I R (mA) 101 101 175 °C 100 175 °C 150 °C 10-1 125 °C 10-2 100 °C 75 °C 10-3 50 °C 10-4 25 °C 10-5 125 °C 0 40 -1 10 80 120 160 200 Reverse Voltage - VR (V) 240 Typical Junction Capacitance Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 200 °C 200 °C 100 25 °C 10-2 0.0 0.2 0.4 0.6 0.8 Forward Voltage Drop - V F (V) 1.0 300 240 180 120 60 0 0 40 80 120 160 Reverse Voltage - VR (V) 200 240 Note: The Vf curves shown are for the SD125SCU200 unpackaged die only. DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. © 2002 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 • www.sensitron.com • [email protected]