Series AM15E-Z 15 Watt | DC-DC Converter FEATURES: • • • • • RoHS compliant Full SMD internal technology Wide 2:1 input range High efficiency up to 88% Pin compatible with multiple manufacturers • • • • o o Operating temperature -40 C to + 85 C Input/Output Isolation 1500VDC Continuous short circuit protection Low profile metal package Models Single output Model AM15E-1203SZ AM15E-1205SZ AM15E-1207SZ AM15E-1209SZ AM15E-1212SZ AM15E-1215SZ AM15E-1218SZ AM15E-1224SZ AM15E-2403SZ AM15E-2405SZ AM15E-2407SZ AM15E-2409SZ AM15E-2412SZ AM15E-2415SZ AM15E-2418SZ AM15E-2424SZ AM15E-4803SZ AM15E-4805SZ AM15E-4807SZ AM15E-4809SZ AM15E-4812SZ AM15E-4815SZ AM15E-4818SZ AM15E-4824SZ Input Voltage (V) 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 36-72 36-72 Output Voltage (V) Output Current max (A) Capacitive load, max (µF) Efficiency (%) 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3 3 2 1.66 1.25 1 0.8 0.62 3 3 2 1.66 1.25 1 0.8 0.62 3 3 2 1.66 1.25 1 0.8 0.62 3300 3300 2200 1000 1000 680 470 470 3300 3300 2200 1000 1000 680 470 470 3300 3300 2200 1000 1000 680 470 470 79 83 83 83 85 85 83 85 80 85 84 85 86 88 86 86 80 85 85 85 88 87 86 85 Output Voltage (V) Output Current max (A) Capacitive load, max (µF) Efficiency (%) Models Dual output Model AM15E-1203DZ AM15E-1205DZ AM15E-1207DZ AM15E-1209DZ AM15E-1212DZ AM15E-1215DZ AM15E-1218DZ AM15E-1224DZ AM15E-2403DZ AM15E-2405DZ AM15E-2407DZ AM15E-2409DZ www.aimtec.com F 051e R12.D Input Voltage (V) 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±2 ±1.5 ±1 ±0.83 ±0.62 ±0.5 ±0.4 ±0.31 ±2 ±1.5 ±1 ±0.83 Tel: +1 514 620 2722 1 of 4 ±1000 ±1000 ±680 ±470 ±470 ±330 ±220 ±220 ±1000 ±1000 ±680 ±470 79 83 82 82 85 85 82 85 80 85 82 82 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15E-Z 15 Watt | DC-DC Converter Models Dual output (continued) Model Input Voltage (V) AM15E-2412DZ AM15E-2415DZ AM15E-2418DZ AM15E-2424DZ AM15E-4803DZ AM15E-4805DZ AM15E-4807DZ AM15E-4809DZ AM15E-4812DZ AM15E-4815DZ AM15E-4818DZ AM15E-4824DZ Output Voltage (V) 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 36-72 36-72 Capacitive load, max (µF) Output Current max (A) ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±0.62 ±0.5 ±0.4 ±0.31 ±2 ±1.5 ±1 ±0.83 ±0.62 ±0.5 ±0.4 ±0.31 ±470 ±330 ±220 ±220 ±1000 ±1000 ±680 ±470 ±470 ±330 ±220 ±220 Efficiency (%) 86 87 82 86 80 85 85 85 86 85 84 85 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Nominal Typical 12 24 48 9-18 18-36 36-72 12 Vin 24 Vin 48 Vin 20 -0.7-24 -0.7-40 -0.7-80 100 Units VDC π (Pi) Network Filter Start up time Absolute Maximum Rating Maximum Peak Input Voltage time ms VDC ms Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 3 sec Rated Units 1500 VDC MOhm pF > 1000 470 Output Specifications Parameters Voltage accuracy Voltage balance (Dual output model) Short Circuit protection Short circuit restart Current limiting Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise Rising time www.aimtec.com F 051e R12.D Conditions Typical Balanced load ±1 ±1 Maximum Units % % Continuous Auto Recovery 120 ±0.5 ±0.5 ±0.5 ±0.5 ±0.02 100 10 HL-LL HL-LL 10-100% load 10-100% load At 20MHz Bandwidth Tel: +1 514 620 2722 2 of 4 % % % % % o %/ C mV p-p ms Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15E-Z 15 Watt | DC-DC Converter General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Cooling Humidity Case material Potting material Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load derating above 71ºC 200 Maximum Units KHz o C o C o C -40 to +85 -40 to +125 100 Free air convection % 95 Nickel coated copper UL94V-0 rated g 30 Tolerance ±0.5mm 2.00 x 1.00 x 0.40 inches 50.80 x 25.40 x 10.16 mm o > 1,121,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) At nominal input, 25% load step mS 350 change (75% - 50% -25% of Iout) Transient recovery time Safety Specifications Parameters Agency approvals Standards CE EN 55022 (Radiated) – Class A; EN 55024 – Class A; IEC61000-4-2 ; IEC61000-4-3 NOTE: Also designed to meet IEC60950-1:2001 Pin Out Specifications Pin 1500VDC 1 2 3 4 5 Single Dual +V Input -V Input +V Output No Pin -V Output +V Input -V Input +V Output Common -V Output 2.54 (0.10) Dimensions: 50.80 (2.00) 2 www.aimtec.com F 051e R12.D 20.32 (0.80) 15.24 (0.60) 10.16 (0.40) Notes: All dimensions are typical in millimeters (inches). Tolerance ±0.25 (±0.01) 5.08 (0.20) Min 10.16 (0.40) DIA 1.00 (0.04) 5 15.24 (0.60) Built-in Stand-offs to ease PCB cleaning 4 10.16 (0.40) Bottom View 10.16 (0.40) 25.40 (1.00) 5.08 (0.20) 1 2.54 (0.10) 10.16 (0.40) 3 Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15E-Z 15 Watt | DC-DC Converter Derating B 100 LFM 75 ºC A Free Air 70 ºC D 400 LFM 85 ºC C 200 LFM 80 ºC A B C D Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.D Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only