MAAMSS0046 Broadband IF Driver Amplifier 50 - 2500 MHz Rev. V2 Functional Schematic Features • • • • • • • • • • • Broadband Operation Output Intercept Point: +38.5 dBm @ 250 MHz Output P1dB: +19 dBm High Efficiency 50 Ω Input/Output Match Gain: 18 dB @ 250 MHz Lead-Free SOT-89 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of MAAMSS0017 Pin 1 Description M/A-COM’s MAAMSS0046 driver amplifier is a GaAs MMIC which exhibits high OIP3 as well as high gain and low power consumption in a lead-free SOT-89 surface mount plastic package. The MAAMSS0046 employs a monolithic single stage design featuring a convenient 50 Ω input / output impedance that minimizes the number of external components required. The device runs off a single +5 volt supply and draws 70 mA typically. The MAAMSS0046 is fabricated using M/A-COM’s iHBT process to realize low current and high power functionality. The process features full passivation for increased performance and reliability. Ordering Information 1,2 RF In RF Out Pin Configuration Pin No. Function Pin No. Function 1 RF Input 3 RF Output/Bias 2 Ground Absolute Maximum Ratings 4,5 Parameter RF Input Power Absolute Maximum 6 15 dBm Voltage Junction Temperature 6 Volts 7 +150°C Part Number Package Operating Temperature -40 °C to +85 °C MAAMSS0046TR-3000 3000 piece reel Storage Temperature -65 °C to +150 °C MAAMSS0046SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. Maximum Operating Conditions 3 Parameter Maximum Operating Conditions Junction Temperature 125°C RF Input Power 14 dBm 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. M/A-COM does not recommend sustained operation near these survivability limits. 6. The MAAMSS0046 is designed to operate optimally at 10 dB backed off from its output P1dB. Driving the device at higher power levels could degrade performance. 7. Thermal Resistance = 110°C/W. 3. Operating at or within these conditions will ensure MTTF > 1 x 106 hours. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAMSS0046 Broadband IF Driver Amplifier 50 - 2500 MHz Rev. V2 Electrical Specifications: TA = 25°C, VCC = 5 V, Z0 = 50 Ω, PIN ≤ -10 dBm Parameter Test Conditions Units Min. Typ. Max. Gain 250 MHz 50 - 600 MHz 600 - 1500 MHz 1500 - 2000 MHz 2000 - 2500 MHz dB dB dB dB dB 15.5 — — — — 18 17 12.5 10.5 8 19.5 — — — — Noise Figure 50 - 600 MHz 600 - 1500 MHz 1500 - 2500 MHz dB dB dB — — — 4.8 5.1 5.3 — — — Input Return Loss 50 - 600 MHz 600 - 2500 MHz dB dB — — 10 13 — — Output Return Loss 50 - 600 MHz 600 - 1500 MHz 1500 - 2500 MHz dB dB dB — — — 10 13 10 — — — Output 1dB Compression 50 - 600 MHz 600 - 2500 MHz dBm dBm — — 20 19 — — Output IP3 Two tone, PIN / Tone = -13 dBm, Tone spacing = 10 MHz 250 MHz 50 - 600 MHz 600 - 2500 MHz dBm dBm dBm 35 — — 38.5 37 34 — — — Current — mA — 70 100 PCB Configuration Schematic Including Off-Chip Components Component List Operating the MAAMSS0046 Part Value Package Manufacturer C1 150 pF 0603 Murata C2 0.1 µF 0603 Murata C3 1000 pF 0603 Murata L1 180 nH 1008 Coilcraft The MAAMSS0046 can be damaged by electrostatic discharge (ESD). Use proper ESD control techniques when handling this device. To operate the MAAMSS0046, follow these steps. 1. Apply VCC (5.0 V). 2. Set PIN. 3. Turn off in reverse order. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAMSS0046 Broadband IF Driver Amplifier 50 - 2500 MHz Rev. V2 Typical Performance Curves Reverse Isolation Gain -10 20 +25°C -40°C +85°C 15 -20 +25°C -40°C +85°C 10 -30 5 -40 0 0.0 0.5 1.0 1.5 2.0 0.0 2.5 0.5 1.0 1.5 2.0 2.5 2.0 2.5 2.0 2.5 Frequency (GHz) Frequency (GHz) Input Return Loss Output Return Loss 0 0 +25°C -40°C +85°C -5 -10 +25°C -40°C +85°C -10 -20 -15 -30 -40 -20 0.0 0.5 1.0 1.5 2.0 0.0 2.5 0.5 1.0 1.5 Frequency (GHz) Frequency (GHz) Noise Figure OIP3 (PIN = -13 dBm / tone) 7 45 +25°C -40°C +85°C 40 +25°C -40°C +85°C 6 35 5 30 4 3 25 0.0 0.5 1.0 1.5 Frequency (GHz) 2.0 2.5 0.0 0.5 1.0 1.5 Frequency (GHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAMSS0046 Broadband IF Driver Amplifier 50 - 2500 MHz Rev. V2 Typical Performance Curves P1dB 30 +25°C -40°C +85°C 25 20 15 10 0.0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Lead-Free SOT-89 Plastic Package† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.