RoHS Compliant Down Converter 1500 — 2400 MHz MAIA-007495-000100 V1 Features • • • • • • • • • • • LNA Mixer integration Typical conversion gain of 7 dB Typical Two-Tone IM Ratio of ≥ 50 dBm LO Drive-Level: +13 dBm Low Cost / High Performance 50 ohm Nominal Impedance Lead-Free QSOP-16 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of SA65-0003 Functional Block Diagram Description M/A-COM’s MAIA-007495-000100 is an integrated assembly containing a GaAs FET MMIC LNA and GaAs FET mixer. This device is packaged in a 16 leaded QSOP plastic surface mount package. The amplifier can be biased with either +3V or +5V, the mixer requires no DC bias. The conversion gain of the integrated combination is typically 6 dB at +3V bias and 8 dB at +5V bias. The SA65-0003 is ideally suited for RF/IF communications applications requiring down conversion with some gain. 1. See “External Circuiting Parts” on Sheet 3 for the values of the external components. Pin Configuration Pin # Function Description 1 GND RF and DC Ground 2 RES External current control (optional) This MCM contains a mixer that is fabricated using a mature 1-micron GaAs process, it also contains an LNA that is fabricated using a low cost mature 0.5micron gate length GaAs MESFET process. Both die feature full passivation for increased performance and reliability. Ordering Information GND RF and DC Ground 4 RF IN RF Input of the amplifier 5 GND RF and DC Ground 6 LO LO port of the mixer 7 GND RF and DC Ground 8 IF IF port of the mixer 9 RF GND RF and DC Ground 10 GND RF and DC Ground 2 RF port of the mixer Part Number Package 11 RF MAIA-007495-000100 Bulk Packaging 12 GND MAIA-007495-0001TR MAIA-007495-0001TB 13 1000 piece reel Sample Test Board Note: Reference Application Note M513 for reel size information. Note: Die quantity varies. 1 3 2. RF OUT RF and DC Ground 2 RF output of the amplifier 14 GND RF and DC Ground 15 VDD Positive supply voltage 16 GND RF and DC Ground The output port of the amplifier, RFOUT, and the input port of the mixer, RF, are adjacently placed so that an external filter can be used. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Down Converter 1500 — 2400 MHz MAIA-007495-000100 V1 Electrical Specifications: TA = +25°C, Z0=50 Ohms, RF = -10 dBm3, LO = +13 dBm, IDD ≈ 45 mA Test Conditions3 Units Min Typ Max LNA +3V LNA +5V dB dB 3.1 4.6 6.0 8.0 6.6 8.8 Isolation 6 LO to RF IN LO to IF dB dB 29 19 32 23 — — Reverse Isolation7 LNA +3V dB 30 40 — VSWR LO RF IN IF Ratio Ratio Ratio — — — 1.4:1 1.9:1 1.9:1 — 2.5:1 2.1:1 Input IP3 3,4,5 LNA +3V LNA +5V dBm dBm 13 21 17.5 25 — — Parameter Conversion Gain 3. 4. 5. 6. 7. 8. 9. 8,9 For IP3 measurements, RFIN = -24 dBm, this low RF IN level gets amplified through the LNA. For IP3 measurements, RFIN2 = RFIN1 + 10 MHz, LO = RFIN1—140 MHz. For IP3 measurements, IP3 = IMR/2 + PIN. RF IN to IF Isolation is typically 0 dB. Reverse Isolation is measured from IF to RFIN with the IF at –10 dBm, LO at +13 dBm. The amplifier has a normal gain of 12.5 dB, 3V bias and 14.0 dB, 5V bias. Amplifier typical Noise Figure = 1.5 dB. NFT = NF1 + (NF2 - 1)/G1 Absolute Maximum Ratings 10,11 Parameter Absolute Maximum 12 +17 dBm LO Drive Power 12 +23 dBm VDD +10 VDC RF Input Power Current 13 Channel Temperature 80 mA 14 +150°C Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 10.Exceeding any one or combination of these limits may cause permanent damage to this device. 11.M/A-COM does not recommend sustained operation near these survivability limits. 12.Total power for RF and LO ports should not exceed +23 dBm. 13.When pin #2 is used to increase current—see note 8 above. 14.Thermal resistance (θjc) = +95°C/W. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Down Converter 1500 — 2400 MHz MAIA-007495-000100 V1 Recommended PCB Configuration Spurious Table 4X -12 -37 -65 -75 -75 4X -1.9 -39 -72 -77 -77 3X -2.8 -29 -68 -66 -74 3X 7.1 -30 -70 -77 -75 Harmonic 2X 7.0 -27 -37 -68 -74 of LO (n) 2X 11.8 -27 -47 -75 -75 1X 4.5 0 -48 -69 -74 1X 11.8 0 -58 -76 -76 0X N/A -5 -34 -69 -70 0X N/A -5 -46 -75 -70 0X 1X 2X 3X 4X Harmonic of RFIN (m) External Circuitry Parts 15 Part Value Purpose C1 47 pF DC Block C2 47 pF By-pass C3 3.3 pF LO Port Matching Network L1 3.9 nH Tuning L2 3.0 nH LO Port Matching Network L3 12 nH RF Choke R1 See Note 16 Optional Current Control R2 5.1 k Ohms DC Return R3 330 Ohms LO Port Matching Network The spurious table shows the spurious signals resulting from the mixing of the RFIN and LO input signals, assuming down conversion. The number of dB below the conversion loss level indicates the mixing products. The lower frequency mixing term is shown for two different input levels. The top number is for an RFIN power level of –19 dB; the lower number is for –29 dB. Assuming the LNA gain is approximately 14 dB, the mixer input will see approximately –5 dB and –15 dB. |mFRF - nFLO|, RF = -19 dB |mFRF - nFLO|, RF = -29 dB RF = 1850 MHz LO = 1710 MHz 15. All external circuitry parts are readily available, low cost surface mount components (.060 in. x .030 in. or .080 in. x .050 in.). 16. Pin 2 allows use of an external resistor to ground for optional higher current. For 20 mA operation, no resistor is used. For IDD ≈ 30 mA, R2 = 43 Ohms For IDD ≈ 45 mA, R2 = 15 Ohms For IDD ≈ 60 mA, R2 = 10 Ohms 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Down Converter 1500 — 2400 MHz MAIA-007495-000100 V1 Typical Performance Curves Isolation at +3V Gain +3 V +5 V L- I 10 L- R 40 Isolation (dB) Gain (dB) 8 6 4 2 1.5 1.6 1.7 1.8 1.9 30 20 10 0 2.0 1.5 1.6 1.7 Frequency (GHz) 1.8 1.9 2.0 Frequency (GHz) IIP3 VSWR at +3V +3 V +5 V IF 20 LO RF 3.0 2.5 VSW R IIP3 (dB) 15 10 2.0 1.5 5 1.0 0 1.5 1.6 1.7 1.8 1.9 2.0 Frequency (GHz) 1.7 1.8 1.9 2.0 Frequency (GHz) 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Down Converter 1500 — 2400 MHz MAIA-007495-000100 V1 Lead-Free, QSOP-16 † † Reference Application Note M538 for lead-free solder reflow recommendations. 5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.