CORCOM Product Guide Filtered Modular Jacks with Enhanced Performance LC Series Shield 2 RJ11 UL Recognized CSA Certified LC Series Typical insertion loss in dB: Line-to-ground (stop band) in a 50 ohm circuit Shield 1 RJ45 Contacts: Material: Plating: Barrier underplating: Resistance: Initial: After durability testing: (500 mating cycles) Frequency-MHz 100 200 500 1000 30 60 80 28 40 51 40 27 24 22 30 41 59 40 31 28 24 Type: Standard value: Standard tolerance: Ferrites: Type: Sleeves: Block: Monolithic ceramic chip 820 pF ±20% Tin-plated copper alloy Glass-filled polyester (UL94V-0) Dielectric Withstanding Voltage: Line-to-line and line-to-ground 5 Frequency-MHz 10 30 50 70 100 4 8 18 24 30 40 8 11 21 28 33 37 Printed Circuit Board Retention: Before soldering: After soldering: Signal Line Products 1 20 milliohms max. 30 milliohms max. High resistivity, nickel zinc ceramic Single-aperture cylinders Multi-aperture rectangular prism Housing Material: Typical insertion loss in dB: Line-to-line (pass band) in a 50 ohm circuit 2 Phosphor Bronze 50 microinches gold 100 microinches nickel Capacitors: Shield Material: Ferrite Sleeves Ferrite Blocks Shield 2 RJ45 Specifications Capacitance components enhance the filtering performance in the LC models. Available with block or sleeve inductance, the additional chip capacitors provide additional filtering on each line. The series features shields with a board ground or spring finger panel interface. Ferrite Sleeves Ferrite Blocks Shield 1 RJ11 1000 VAC for 60 seconds 1 lb. minimum 20 lb. minimum Model dimensions and PC board layout on pages 170 to 174. Part Numbers RJ11-2LC1-S RJ11-2LC1-B RJ11-2LC2-S RJ11-2LC2-B RJ11-4LC1-S RJ11-4LC1-B RJ11-4LC2-S RJ11-4LC2-B RJ11-6LC1-S RJ11-6LC1-B RJ11-6LC2-S RJ11-6LC2-B RJ45-6LC1-S RJ45-6LC1-B RJ45-6LC2-S RJ45-6LC2-B RJ45-8LC1-S RJ45-8LC1-B RJ45-8LC2-S RJ45-8LC2-B 177 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions Standard Profile RJ Jack Dimensions For the L, LC, LCT and X Series of RJ Jack Filters RJ11 (No Shield) RJ11 (Style 2 Shield) .900 22.86 .800 20.32 .810 20.57 .620 15.75 .520 13.21 .590 14.99 .780 19.81 .040 1.02 .04 1.02 .195 4.95 .165 4.19 .195 4.95 .322 8.19 .165 4.19 .165 4.19 .395 10.03 .485 12.32 .322 8.18 6 6 5 4 3 2 .520 13.21 4 2 5 3 .540 13.72 1 1 Part Numbers RJ11-2L-S RJ11-4L-S RJ11-6L-S RJ11-2L-B RJ11-4L-B RJ11-6L-B Part Numbers RJ11-2LC2-S RJ11-4LC2-S RJ11-6LC2-S RJ11-2X RJ11-4X RJ11-6X RJ11 (Style 1 Shield) RJ11-2LC2-B RJ11-4LC2-B RJ11-6LC2-B RJ11-4L2-S RJ11-6L2-S RJ11-4L2-B RJ11-6L2-B RJ11-6LCT2-S RJ11-6LCT2-B RJ11 (PC Board Layout) .900 22.86 .860 21.84 .840 21.34 .780 19.81 .04 1.02 .195 4.95 .165 4.19 .165 4.19 .322 8.18 .485 12.32 6 4 2 5 3 .540 13.72 1 Part Numbers RJ11-2LC1-S RJ11-4LC1-S RJ11-6LC1-S RJ11-2LC1-B RJ11-4LC1-B RJ11-6LC1-B RJ11-4L1-S RJ11-6L1-S RJ11-4L1-B Shown from Component Side For all RJ11 L, LC, LCT and X Series Models RJ11-6L1-B RJ11-6LCT1-S RJ11-6LCT1-B 182 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions (Continued) Standard Profile RJ Jack Dimensions (cont'd) For the L, LC, LCT and X Series of RJ Jack Filters RJ45 (No Shield) RJ45 (Style 2 Shield) .700 17.78 .600 15.24 .900 22.86 .800 20.32 .810 20.57 .540 13.72 .780 19.81 .04 1.02 .04 1.02 .165 4.19 .195 4.95 .322 8.18 .195 4.95 .165 4.19 .165 4.19 .395 10.03 .322 8.18 .485 12.32 8 7 8 6 7 5 6 4 5 3 4 2 .620 15.75 3 1 2 1 Part Numbers RJ45-6L-S RJ45-8L-S RJ45-6L-B RJ45-8L-B RJ45-6X RJ45-8X Part Numbers RJ45-6LC2-S RJ45-6L2-S RJ45-8LCT2-S RJ45-8LC2-S RJ45-8L2-S RJ45-8LCT2-B RJ45-6LC2-B RJ45-6L2-B RJ45-8LC2-B RJ45-8L2-B RJ45 (PC Board Layout) RJ45 (Style 1 Shield) .900 22.86 .860 21.84 .920 23.37 .322 8.18 .350 8.89 .250 6.35 .076±.003 Dia. 1.93±.08 (4 PLACES) .780 19.81 .04 1.02 .195 4.95 3 .450 11.43 .165 4.19 5 7 .165 4.19 .322 8.18 .210 5.33 4 3 .050 1.27 (7 SPACES) 4 6 .090 .050 2.29 1.27 .128±.003 Dia. 3.25±.08 (4 PLACES) .345 8.76 Shown from Component Side 8 7 6 2 8 .485 12.32 5 Signal Line Products .030 +.008/.003 Dia. .76 +.20/-.08 (8 PLACES) 1 .620 15.75 For all RJ45 L, LC, LCT and X Series Models. 2 1 Part Numbers RJ45-6LC1-S RJ45-6L1-S RJ45-8LCT1-S RJ45-8LC1-S RJ45-8L1-S RJ45-8LCT1-B RJ45-6LC1-B RJ45-6L1-B RJ45-8LC1-B RJ45-8L1-B Part Numbers RJ45-6LC2-S RJ45-6L2-S RJ45-8LCT2-B RJ45-8LC2-S RJ45-8L2-S RJ45-8LCT2-S RJ45-6LC2-B RJ45-6L2-B RJ45-8LC2-B RJ45-8L2-B 183 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions (Continued) Standard Profile RJ Jack Dimensions (cont'd) For the L, LC, LCT and X Series of RJ Jack Filters Low Profile RJ Jack Dimensions For the N and Z Series of RJ Jack Filters RJH (No Shield) RJ11 (Low Profile - No Shield) .540 13.72 .440 11.18 .810 20.57 .590 14.99 .620 15.75 .520 13.21 .710 18.03 .485 12.32 .04 1.02 .010 .25 .135 3.43 .165 4.19 .195 4.95 .322 8.18 .217 5.51 .395 10.03 .400 10.16 6 5 4 4 3 2 3 .520 13.21 1 2 1 .250 6.35 Part Numbers RJH-4-L-B .350 8.89 RJH (No Shield - PC Board Layout) .300 7.62 Edge of board .322 8.18 Part Numbers RJ11-6N-B RJ11-6Z RJ11 Low Profile (Style 3 Shield) .740 18.80 .910 Max. 23.11 .350 8.89 .250 6.35 .030 +.008/-.003 Dia. .76 +20/-.08 (4 holes) .515* 13.08 .010 .25 1 3 RJ11-6N-S 2 .120 3.05 .135 3.43 .165 4.19 4 .075 1.91 .050 1.27 (3 Spaces) .430 10.92 .217 5.51 .128±.003 Dia. 3.25±.08 (2 holes) 6 4 2 Shown from Component Side 5 3 .550 13.97 1 All tolerances ±0.010 [0.25] unless otherwise noted. Part Numbers RJ11-6N3-B RJ11-6N3-S RJ11-6Z3 *To top of shield 184 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions (Continued) Low Profile RJ Jack Dimensions (cont'd) For the N and Z Series of RJ Jack Filters RJ11 Low Profile (Style 4 Shield) .620 15.75 RJ45 Low Profile (No Shield) .740 18.80 .515* 13.08 .010 .25 .515 13.08 .120 3.05 .010 .25 .430 10.92 6 4 2 RJ11-6N4-S .217 5.51 .550 13.97 3 2 1 .080 2.03 4 6 .120 3.05 3 5 3 .550 13.97 1 Part Numbers RJ11-6N3-B RJ11-6N3-S RJ11-6Z3 RJ45 Low Profile (Style 3 Shield) .030 + .008/- .003 Dia. .76 +.20/-.08 (6 PLACES) .740 18.80 .515* 13.08 .050 (5 SPACES) 1.27 .128±.003 Dia. 3.25±.08 (2 HOLES) 5 .120 3.05 .075 1.91 Signal Line Products 2 .400 10.16 4 .99 Max. 25.15 1 .430 10.92 6 5 RJ11-6Z4 .350 8.89 .250 6.35 .135 3.43 .165 4.19 .217 5.51 RJ11 Low Profile (PC Board Layout) .076±.003 1.93±.08 Dia. (2 PLACES) .120 3.05 .135 .165 3.43 4.19 .217 5.51 Part Numbers RJ11-6N4-B .740 18.80 .910 Max. 23.11 .135 .165 3.43 .4.19 .217 5.51 .430 10.92 8 7 6 Shown from Component Side 5 4 3 For all RJ11 N and Z Series Models .630 16.00 2 1 Part Numbers RJ45-8N3-B RJ45-8N3-S RJ45-8Z3 *To top of shield 185 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions (Continued) Low Profile RJ Jack Dimensions (cont'd) For the N and Z Series of RJ Jack Filters RJ45 Low Profile (Style 4 Shield) .740 18.80 .700 17.78 .515* 13.08 .010 .25 .120 3.05 .135 3.43 .217 5.51 .165 4.19 .430 10.92 8 7 6 5 4 3 .630 16.00 2 1 Part Numbers RJ45-8N4-B RJ45-8N4-S RJ45-8Z4 *To top of shield RJ45 Low Profile (PC Board Layout) .076±.003 Dia. 1.93±.08 (2 Places) .217 5.51 .350 8.89 .250 6.35 .030 +.008/-.003 Dia. .76 +.20/-.08 (8 Places) 1 3 .450 11.43 5 7 2 .050 (7 Spaces) 1.27 4 6 8 .095 2.41 .120 3.05 .050 1.27 .128±.003 Dia. 3.25±.08 (2 Places) Shown from Component Side For all RJ45 N and Z Series Models All tolerances ±0.010 [0.25] unless otherwise noted. 186 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com