Catalog 1308242 Issued 3-03 AGASTAT VTMR1 series On-Delay Timing Module With Internal Potentiometer, Relay Output • • • • • • On-delay timing mode 8A SPDT relay output. Internal potentiometer for timing adjustment. Reliable solid state timing circuitry. Excellent transient protection. Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25°C On-Delay. Voltage: ± 10% 120VAC/VDC. Power Requirement: 3.5VA, max. Timing Specifications Timing Ranges: 15 to 300 sec. Timing Adjustment: Internal potentiometer. Accuracy: Repeat Accuracy: ± 5% max. (0.25% typ.) Overall Accuracy: Max. Time: –0%, +10%. Min. Time: –30%, +10%. Reset Time: 250 ms, max. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 120 VAC/VDC 2,580V 2,150V* * Min. source impedance of 100 ohms. Current Drain: 30mA, Max. Output Contact Data Environmental Data Arrangement: 1 Form C (SPDT). Rating: 8A, resistive, at nominal operating voltage. Expected Mechanical Life: 10,000,000 operations. Expected Electrical Life: 100,000 operations. Temperature Range: Storage: -40°C to +70°C. Operating: -40°C to +70°C. Mechanical Data Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Weight: 4 oz. (112g) approximately. Initial Dielectric Strength Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions and Wiring Diagram .278 (7.06) .763 (19.4) 2.00 (50.8) Ordering Information OUTPUT RELAY Part Number VTMR1AEA Time Range 15 to 300 sec. Input Voltage 120VAC OUTPUT RELAY .286 TIME (7.26) DELAY ADJUST 2.00 (50.8) .170 DIA (4.32) ACCEPTS #8 SCREW INPUT VOLTAGE .250 (6.35) X .032 (.813) QUICK CONNECTS .885 (22.5) 1.25 (31.8) Authorized distributors are likely to stock the following: None at present. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1243 Refer to inside back cover.