Major League Electronics .0197 cl Fine Pitch Socket Ordering Information FPS5-2 XX - D - XXX - F - V - XX - X - XX - LF Pins Per Row Lead Free 05 - 30 Alignment Pin Row Specification Leave blank if not needed AP = With D = Dual Row Pin Options Body Height 2.20mm .087 2.70mm .106 3.20mm .126 Packing Information TR-P = Tape and Reel with Plastic Pick and Place pad TB-P = Tube with Plastic Pick and Place pad TB-0 = Tube without Pick and Place Pad If left blank, packaging at MLE's discretion Pad may be metal, mylar or plastic 087 106 126 Plating Options Gold Flash over Entire Pin F Vertical Specifications Current Rating: 0.5 Ampere AC/DC Voltage Rating: 50V AC/DC Insulation Resistance: 100MΩ Min. @ 500V DC Dielectric Withstanding: 500V AC for one minute Contact Resistance: 50mΩ Max. Operating Temperature: -25°C to + 85°C Max. Process Temperature: 260°C up to 10 secs. Materials Contact Material: Phosphor Bronze Insulator Material: Nylon 46 Plastic, UL94V-0 Plating: Gold Flash over entire pin TABLE A HEADER SOCKET FPH5-2-XX-D-098 FPH5-2-XX-D-098 FPH5-2-XX-D-128 FPH5-2-XX-D-128 FPH5-2-XX-D-157 FPS5-2-XX-D-087 FPS5-2-XX-D-106 FPS5-2-XX-D-106 FPS5-2-XX-D-126 FPS5-2-XX-D-126 MATED HEIGHT 'M' .118 (3.00mm) .138 (3.50mm) .157 (4.00mm) .177 (4.50mm) .197 (5.00mm) HEADER HEIGHT 'H' .098 (2.50mm) .098 (2.50mm) .128 (3.25mm) .128 (3.25mm) .157 (4.00mm) SOCKET HEIGHT 'S' .087 (2.20mm) .106 (2.70mm) .106 (2.70mm) .126 (3.20mm) .126 (3.20mm) Mates With FPH5-2 Products cut to specific sizes are uncancellable/nonreturnable FPS5-2 SERIES .0197cl Dual Row - Straight Surface Mount Board to Board Socket Parts are subject to change without notice 29 MAY 09 4235 Earnings Way, New Albany, Indiana, 47150, USA 1-800-782-3486 (USA/Canada/Mexico) Tel: 812-944-7244 Fax: 812-944-7268 E-mail: [email protected] Web: www.mlelectronics.com