PXD30W Series Single and Dual Output 30W DC-DC Converters Features u Industry Standard 2” x 1” Footprint u Six Sided Shielding u Safety Agency Certifications u 9-36V or 18-75VDC Input u Wide range input Key Market Segments & Applications Specifications Model Max Output Power Voltage Accuracy Voltage Adjustment Minimum Load Line Regulation Load Regulation Cross Regulation (25% to 100%) Ripple and Noise (peak to peak) Start up time Remote on/off Temperature Coefficient Operating Temperature Maximum Case Temperature Storage Temperature Thermal Shock Relative Humidity (non condensing) Transient Response (25% step load change) Overvoltage Protection (Zener clamp) Overcurrent and Short Circuit Protection Input Surge Voltage (Maximum for 100ms) Reflected input ripple (peak to peak) Isolation Voltage Isolation Resistance Isolation Capacitance (max) Typical Switching Frequency (Fixed) MTBF (BELLCORE TR-NWT-000332) Vibration Conducted and Radiated Emissions (1) Immunity (2) Safety Agency Certifications Size (L x W x H) Weight Warranty Single Output Dual Output 30W ±1% ±10% None None ±0.2% ±0.5% ±1% ±5% <5.1V output: 100mV, 12-15V output: 150mV 30ms Positive Logic: ON: Open or 3-12V, OFF Short or <1.2V Negative Logic: ON: Short or <1.2V, OFF: Open or 3-12V <±0.02%/°C -40 to +85°C, derating necessary above 50°C 105°C (Overtemperature Protection 115°C) -55 to 125°C MIL-STD-810F 5 to 95% 250us recovery 3.3V: 3.9V, 5V: 6.2V, 12V: 15V, 15V: 18V Typically at 150%, hiccup with self recovery 24V input: 50V, 48V input: 100V 20mA 1600VDC minimum 109 Ohms minimum 1500pF 430kHz 3,163,000 hours MIL-STD-810F EN55022 Level A EN61000-4-2, -3, -4, -5, -6 Pref Criteria A IEC60950-1, UL60950-1, EN60950-1, CE Mark 2x1x0.4” 1.07 oz (30.5g) Two Year Notes: (1) With external ceramic capacitor (24V: 4.7uF, 48V: 2.2uF) connected across input pins (2) For EN61000-4-4 & -5 compliance fit external electrolytic capacitor (24V: 330uF, 48V: 220uF) connected across input pins 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 13 PXD30W Series Model Selector Outline Drawing Output Output Output Input Volt (V) Curr (A) Power (W) Volt (V) Single Outputs 3.3V 7.5A 24.75W 9 - 36VDC 3.3V 7.5A 24.75W 18 - 75VDC 5V 6.0A 30W 9 - 36VDC 5V 6.0A 30W 18 - 75VDC 12V 2.5A 30W 9 - 36VDC 12V 2.5A 30W 18 - 75VDC 15V 2.0A 30W 9 - 36VDC 15V 2.0A 30W 18 - 75VDC Dual Outputs ±5V ±3.0A 30W 9 - 36VDC ±5V ±3.0A 30W 18 - 75VDC ±12V ±1.25A 30W 9 - 36VDC ±12V ±1.25A 30W 18 - 75VDC ±15V ±1.0A 30W 9 - 36VDC ±15V ±1.0A 30W 18 - 75VDC Model PXD30-24WS3P3 PXD30-48WS3P3 PXD30-24WS05 PXD30-48WS05 PXD30-24WS12 PXD30-48WS12 PXD30-24WS15 PXD30-48WS15 86% 86% 88% 88% 89% 90% 89% 91% PXD30-24WD05 PXD30-48WD05 PXD30-24WD12 PXD30-48WD12 PXD30-24WD15 PXD30-48WD15 88% 88% 87% 88% 87% 88% Pinout Derating Curves Pin # 1 2 3 4 5 6 Eff.(%) Function Single Output + Input - Input Remote On/Off + Output - Output Trim Dual Output + Input - Input Remote On/Off + Output Common - Output Remote On/Off Option Suffix No Suffix -N Function Positive Logic Negative Logic Heat Sink (0.22” high) HAPXD HAPXBDCLIP For Additional Information, please visit us.tdk-lambda.com/lp/products/px-series.htm (includes thermal adhesive pad) (two clips required when used) Other Industrial Products PXD10, 20 PXE20, 30 PXF30-40 CC-E 10-20W, 12V, 24V, 48V input 2x1” DC-DC 20-30W, 12V, 24V, 48V input 2x1.6” DC-DC 30-40W, 12V, 24V, 48V input 2x2” DC-DC 1.5 - 25W, 5V, 12V, 24V & 48V input DC-DC 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 14 Revision A3: Dec 2011