LEAD FREE Low Noise CATV Amplifier 50 - 870 MHz MAAMSS0040 V1 Features • • • • • • • • • • Functional Schematic Low Noise Figure Low Distortion Surface Mount Package Push-Pull Design Application Single Positive Supply Lead Free SOIC-16 Package 100% Matte Tin Plating Halogen-Free “Green” Mold Compound 260°C Re-flow Compatible Lead Free Version of MAAMSS0001 Description M/A-COM’s MAAMSS0040 is a GaAs PHEMT MMIC amplifier in a lead-free surface mount SOIC-16 package. The MMIC design is configured as a pair of cascode PHEMT amplifiers for broadband performance. It is designed for integration in a 75ohm push-pull low distortion amplifier circuit. The device is ideally suited for use in CATV, DBS, and DTV applications where low noise figure, low distortion and high linearity are required. Ordering Information Pin Configuration PIN No. PIN Name Description 1 FB1 Feedback 1 2 RI1 RF Input 1 3 RI1 RF Input 1 4 GND Ground Part Number Package MAAMSS0040 Bulk Packaging MAAMSS0040TR 1000 piece reel 5 GND Ground Sample Test Board (Includes 5 Samples) 6 RI2 RF Input 2 MAAMSS0040SMB Note: Reference Application Note M513 for reel size information. Absolute Maximum Ratings 1 Parameter Absolute Maximum Input Power +20 dBm Operating Voltage +10 volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 7 RI2 RF Input 2 8 FB2 Feedback 2 9 N/C No Connection 10 GND Ground 11 RO2 RF Output 2 12 GND Ground 13 GND Ground 14 RO1 RF Output 1 15 GND Ground 16 GND Ground 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. LEAD FREE Low Noise CATV Amplifier 50 - 870 MHz MAAMSS0040 V1 Electrical Specifications: TA = 25°C, Freq: 50 - 870 MHz, VDD = +5 Volts, Z0 = 75 ohms, Test Circuit with M/A-COM Balun ETN1-1-13TR Parameter Test Conditions Units Min. Typ. Max. Gain — dB 11.5 12.0 13.0 Gain Flatness — dB — 0.35 — Noise Figure Input Return Loss 50-150 MHz 150-870 MHz — dB dB dB — — — 3.8 2.8 15 4.0 — — Output Return Loss — dB — 11 — IP3 Two tones at 397 & 403 MHz, +4 dBm output per tone dBm — 33 — Composite Triple Beat, CTB 135 Channels, +25 dBmV/Channel at the output dBc — -72.5 -70 Composite Second Order, CSO 135 Channels, +25 dBmV/Channel at the output dBc — -75 -70 Cross modulation 135 Channels, +25 dBmV/Channel at the output dBc — -64 — P1dB 400 MHz dBm — 23 — IDD + 5 Volts mA — 190 225 Lead Free SOIC-16 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. LEAD FREE Low Noise CATV Amplifier 50 - 870 MHz MAAMSS0040 V1 Typical Performance Curves Gain vs. Frequency to 3 GHz over Temperature Gain vs. Frequency over Temperature 13.5 20 13.0 15 +25°C +85°C -40°C 12.5 10 12.0 5 11.5 0 11.0 -5 10.5 +25°C +85°C -40°C -10 0 250 500 750 1000 0 500 1000 Frequency (MHz) 1500 2000 2500 3000 Frequency (MHz) Input Return Loss vs. Frequency over Temperature Output Return Loss vs. Frequency over Temperature 0 0 +25°C +85°C -40°C -5 +25°C +85°C -40°C -5 -10 -10 -15 -15 -20 -20 -25 -25 -30 -30 0 250 500 750 1000 0 250 Frequency (MHz) 500 750 1000 Frequency (MHz) Noise Figure vs. Frequency, 25°C OIP3 vs. PIN at 400 MHz, 25°C 36 5 35 4 34 3 33 2 32 1 31 30 0 -8 3 -6 -4 -2 0 P (dBm) IN M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. 0 250 500 750 1000 Frequency (MHz) • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. LEAD FREE Low Noise CATV Amplifier 50 - 870 MHz MAAMSS0040 V1 Typical Performance Curves Gain vs POUT at 400 MHz vs. Temperature Recommended PCB Configuration with 0.031” thick FR4 14 +25°C +85°C -40°C 13 12 11 10 9 19 20 21 P OUT 22 23 Recommended Test Circuit Layout 24 (dBm) External Circuitry Parts List Qty Description 8 Capacitor, 0.01 µF, 0603, SMT, 10% (C1-C8) 2 Inductor, 390 nH, 1008, SMT, 10% (L1, L2) 2 Balun, 1:1, M/A-COM, ETN1-1-13TR, SMT (T1, T2) Test Circuit Schematic C3 C5 text text +5V text text text text L1 C1 RF IN C7 text text T2 T1 RF OUT C8 text text text text text text C2 C4 L2 +5V C6 The 1:1 baluns, T1 & T2, are M/A-COM part number ETN1-1-13TR. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.