MASWML0013 SPDT Reflective Switch with TTL Compatible V 1.00 Driver, 6.4 to 18.0 GHz Description Features n n n n n n This SPDT reflective switch offers a 2 W cw RF input power handling capability. It has a single TTL control to drive both channels. This switch has an integral TTL compatible driver. It is a proven design for harsh environments and is suitable for Airborne, Naval & Ground base applications. Broad Band Frequency SMA Connectors Hermetically Sealed Housing Higher Input RF Power TTL Compatible Single TTL Control Other Mechanical SMA Female connectors for RF ports and Solder pins for TTL & DC connections. This device is painted with black epoxy finish. Electrical Performance (Applies over the frequency range @ +25 °C, output load impedance of 50 ohms. Unless otherwise stated limits & conditions are indicated values.) Type SPDT Frequency (GHz) 6.4 - 18.0 I/Loss max (dB) 3.85 Isolation min (dB) 52 R/Loss min (dB) 7.4 S. Speed max I/P Power max (mw) 10 micro second 2w (CW) M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. Logic Power Supply Dimensions (Ex-Con) mm V & mA ‘0’:I/P - Port B Low +5 -15 40.7x40.7x12.9 Loss 250 50 TTL ‘1’:I/P - Port A Low Loss n n n Operating Temp °C Storage Temp -40 to +85 -55 to +125 °C North America: Tel. (800) 366-2266 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1908) 574 200, Fax+44 (1908) 574 300