JNPS-0814 目 次 ／ CONTENTS 1. 頁 / PAGE 機能 ················································································································· 1 FUNCTION············································································································ 6 2. 適合対象 ········································································································· 1 COMPATIBLE OBJECTS ····················································································· 6 3. 関連仕様図 ····································································································· 1 RELATED SPECIFICATION DRAWINGS ························································ 6 4. 関連規格類 ····································································································· 1 RELATED TEST STANDARDS ········································································· 6 5. 適用 ················································································································· 2 APPLICATION ······································································································ 7 6. 品質特性 ······································································································· 3 QUALITY PERFORMANCE················································································· 8 7. 製品上めっき仕様識別表示 ·········································································· 5 PLATING SPEC INDICATION ON CONNECTOR············································ 10 8. 包装＆表示 ····································································································· 5 PACKAGE & IDENTIFICATION ······································································· 10 9. 保管 ················································································································· 5 STORAGE············································································································ 10 10. 注意事項 ········································································································· 5 ATTENTIONS ····································································································· 10 i JNPS-0814 1. FUNCTION This connector is one of MDR board mount receptacle straight series. And mating side has 2 rows of female contacts with the pitch of 1.27mm and contact tails are arranged in 1.27mm×1.905mm staggered grid. This connector can be mounted on the compatible PC board and mating with MDR plug connector enables to have the electrical performance. This connector is grounded by screw lockdown. 2. COMPATIBLE OBJECTS 2-1 COMPATIBLE CONNECTORS 3M BRAND MDR PLUG : 101XX-XXXX XX 2-2 COMPAIBLE PC BOARDS PCB with solder plating hole See RELATED SPECIFICATION DRAWINGS recommended hole pattern. 4U-0010-0466-2 3. RELATED SPECIFICATION DRAWINGS See the drawings described in JNPD-0814. 4. RELATED TEST STANDARDS MIL-STD-202 JEIDA-38-1984 JIS C 0050 JNTM-0039, JNTM-0040 *JNTM: Test Method Standard of Sumitomo 3M for Electronic and Electrical Component Parts. ６ JNPS-0814 5. APPLICATION PRODUCT NUMBER INFORMATION 102 XX – 6 2 X 2 PX PLATING THICKNESS SUFFIX PL : under Nickel Plating CONTACT AREA / Gold Plating 0.2 µm Min. TAIL AREA / Gold Flash Plating with Lubricant Treatment PE : under Nickel Plating CONTACT AREA / Gold Plating 0.5 µm Min. TAIL AREA / Gold Flash Plating PC : under Nickel Plating CONTACT AREA / Gold Plating 0.76 µm Min. TAIL AREA / Gold Flash Plating SOLDER TAIL 2 : 3.4mm RETENTION FEATURE 0 1 : Screw Lock (M2.6) for PC Board : Screw Lock (M2.5) for PC Board TYPE 2 : Standard Body PIN CONFIGURATIONS 6 : Board Mount Straight Type CONTACT QUANTITY XX : XX Pos. (Exception: 100 pos. is shown "A0".) PRODUCT SERIES NAME 102 : MDR Receptacle ７ JNPS-0814 6. QUALITY PERFORMANCE 6-1 RATING ITEM RATING CURRENT 0.5A VOLTAGE AC: 150V Max. TEMPERATURE CONTACT RETENTION FORCE INSERTION & WITHDRAWAL FORCE CONTACT SOLDER ABILITY / DC: 200V Max. -55°C ~ 85°C 6-2 PHYSICAL SPECIFICATIONS TEST DESCRIPTION Max. * The value in ( REQUIREMENT TEST CONDITION 7.85N (0.8 kgf) Min. ) is reference. RELATED STANDARD Tensile speed 5mm / min. ―――― Insertion Force: 1.47N (150 gf) Max. Withdrawal Force: 0.39N (40 gf) Min. Tensile speed 5mm / min with Compatible connector. Spec. Value is estimated by one contact pin. Wetting: 95% Min. or Zero cross time: 3 seconds Max. Solder: Sn-3Ag-0.5Cu - Wetting Measurement: 245°C, 3 seconds - Wetting Balance Method: 245°C Connector should not have any defect portions after test. Dip soldering: 260°C, 10 seconds, 2 times or 263°C, 5seconds, 2 times * Pre-heat Condition: Temp. of Components 100°C Max. Duration 60 seconds Max. Soldering iron: 390°C, 3 seconds, 2 times SOLDERING HEAT RESISTANCE ８ ―――― JNTM-0039 JIS C 0050 JNTM-0040 JNPS-0814 6-3 ELECTRICAL SPECIFICATIONS TEST DESCRIPTION REQUIREMENT DIELECTRIC WITHSTANDING VOLTAGE No appearance of arcing and break down. Leak current: 1mA Max. Impressed voltage is AC 500V rms. between adjacent two contacts for one minute. ―――― 500MΩ Min. Impressed voltage is DC 500V between adjacent two contacts for one minute. ―――― Less than 1µs - Vibration test * as the part of 3M SEQUENCE-II - Mechanical sock test See Table 1. INSULATION RESIDENSE DISCONTINUITY Initial / for each plating spec. 35mΩ Max. Change of contact resistance after evaluation tests/ for each plating spec. ± 25mΩ Max. CONTACT RESISTANCE TEST CONDITION Contact resistance is measured at Short Circuit. Current: 1.5mA Open Circuit Voltage: 20mV by 4 terminal method. * Measurement values include the resistance of contact pins as conductive material. (1) PL Plating 3M SEQUENCE -I / mating (30 cycles) Æ moisture Æ salt spray 3M SEQUENCE -II / thermal shock Æ humidity Æ vibration 3M SEQUENCE -III / thermal life H2S GAS SEQUENCE / mating (30 cycles)Æ H2S gas DURABILITY / 300 cycles MECHANICAL SHOCK / (2) PE Plating and PC Plating 3M SEQUENCE -I / mating (50 cycles) Æ moisture Æ salt spray 3M SEQUENCE -II / thermal shock Æ humidity Æ vibration 3M SEQUENCE -III / thermal life H2S GAS SEQUENCE / mating (50 cycles)Æ H2S gas DURABILITY / 500 cycles * NOTE: See Table 1. for environmental tests. ９ RELATED STANDARD See Table 1. JNPS-0814 Table 1: ENVIROMENTAL TEST ITEM RELATED STANDARD -10 ∼ 65°C, Relative Humidity 95% / 10 cycles MIL-STD-202F106D NaCl 5% solution, 35°C / 48 hours MIL-STD-202F101D THERMAL SHOCK -55°C→25°C→85°C→25°C / 5 cycles MIL-STD-202F107G HUMIDITY (STEADY STATE) 40°C, Relative Humidity 95% / 96 hours MIL-STD-202F103B MOISTURE SALT SPRAY THERMAL LIFE Steady Current: Current Rating × 110%, 85°C / 1000 hours ―――― H2S GAS 3 ± 1 ppm, 40°C, Relative Humidity 70 ∼ 80% / 96 hours JEIDA-38-1984 VIBRATION Sweep Freq.: 10 ∼ 55Hz, Amplitude: 1.52mm (or 98 m/s2) Sweep Cycle: 1 min., Sweep time: 2 hours Sweep Directions: X, Y, Z MIL-STD-202F201A 490 m/s2, 11ms, Half sine shock pulse. 3 times / X,Y,Z directions (Total 9 times) MIL-STD-202E213B MECHANICAL SHOCK 7. TEST CONDITION PLATING SPEC INDICATION ON CONNECTOR The first letter, in stamped 3 letters on the connector body for lot numbering, identified the following plating specs. R XX : PL plating Z XX : PE plating Y XX : PC plating * XX : two alphabet letters 8. PACKAGE & IDENTIFICATION These products are packed with plastic tray and carton box for transit. Carton box is identified by part number, quantity, maker name and lot number. 9. STORAGE This products shall be stored in a room, ambient temperature 5 ∼ 35°C, and ambient humidity 40 ∼ 70%. １０