MASWSS0024 SPDT High Isolation Terminated Switch 0.01 - 3.0 GHz Features Rev. V6 Functional Block Diagram • Positive Voltage Control: 0 / +5 V • High Isolation: 55 dB typ. @ 0.9 GHz 50 dB typ. @ 1.9 GHz • 50-Ohm Internal Terminations • Low Insertion Loss: 0.6 dB typ. @ 0.9 GHz, 0.7 dB typ. @ 1.9 GHz • MSOP-8-EP Package Description The M/A-COM MASWSS0024 GaAs monolithic switch provides high isolation in a low-cost, plastic surface mount package. The MASWSS0024 is ideal for applications across a broad range of frequencies including synthesizer switching, transmit / receive switching, switch matrices and filter banks in systems such as radio and cellular equipment, PCS, GPS, and fiber optic modules. M/A-COM fabricates the MASWSS0024 using a 1.0micron gate length MESFET process. The process features full chip passivation for performance and reliability. Ordering Information1 Pin Configuration2 Pin Function Pin Function 1 V1 5 RF2 2 V2 6 Ground 3 RF Common 7 Ground 4 Ground 8 RF1 2. The exposed pad centered on the package bottom must be connected to RF and DC ground. Part Number Package MASWSS0024 Bulk Packaging MASWSS0024TR 1000 piece reel MASWSS0024TR-3000 3000 piece reel MASWSS0024SMB Sample Board 1. Reference Application Note M513 for reel size information. Absolute Maximum Ratings 3,4 Parameter Absolute Maximum Input Power (0.5 - 3.0 GHz) 3V Control 5V Control +30 dBm +33 dBm Operating Voltage +8.5 Volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0024 SPDT High Isolation Terminated Switch 0.01 - 3.0 GHz Rev. V6 Electrical Specifications 5: TA = 25°C, VCTL = 0, 5.0V (unless otherwise specified) Parameter Test Conditions Units Min Typ Max Insertion Loss 0.01 - 0.5 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz dB dB dB dB — — — — 0.5 0.6 0.7 0.75 — 0.7 0.8 0.9 Isolation 0.01 - 0.5 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz dB dB dB dB — 51 48 43 59 54 52 48 — — — — Return Loss 0.01 - 0.5 GHz 6 0.5 - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz dB dB dB dB — — — — 20 20 20 20 — — — — Input IP2 2-Tone 900 MHz, 5 MHz spacing (VC = 5.0V) dBm — 83 — Input IP3 2-Tone 900 MHz, 5 MHz spacing (VC = 5.0V) dBm — 43 — Trise, Tfall 10% to 90% RF & 90% to 10% RF nS — 24 — Ton, Toff 50% of VC to 10% / 90% RF nS — 15 — Transients VC = 5.0V square wave, in-band mV — 12 — 5. External DC blocking capacitors are required on all RF ports (47 pF capacitors are recommended). Use larger value capacitors for lower frequency operation (e.g. use 10,000 pF capacitors to optimize insertion and return loss at frequencies below 50 MHz). 6. Terminated return loss is governed by blocking capacitors internal to the device; see applications plot. Truth Table Handling Procedures V1 V2 RFC-RF1 RFC-RF2 0 1 Off On 1 0 On Off Logic Level Voltage Level 7 VLO “0” 0 ± 0.2V VHIGH “1” VC ± 0.2V Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 7. 3.0V < VC < 8.0V 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0024 SPDT High Isolation Terminated Switch 0.01 - 3.0 GHz Rev. V6 Typical Performance Curves Insertion Loss vs. Frequency Return Loss vs. Frequency 1.00 30 Input Return Loss "ON State" 25 Output Return Loss "OFF state" 0.75 20 0.50 15 0.25 10 0.5 1.0 1.5 2.0 2.5 3.0 0.00 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) MSOP-8-EP Isolation vs. Frequency 80 60 40 20 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0024 SPDT High Isolation Terminated Switch 0.01 - 3.0 GHz Rev. V6 Applications Section Typical Performance Curves, Very Low Frequency, 10000 pF Blocking Capacitors Return Loss vs. Frequency Insertion Loss vs. Frequency 0 2.0 -5 1.5 -10 -15 1.0 -20 Return Loss - Insertion Path (dB) 0.5 Return Loss - Termination (dB) -25 -30 0.0 0.1 0.2 0.3 0.4 0.5 Frequency (GHz) 0.0 0.0 0.1 0.2 0.3 0.4 0.5 Frequency (GHz) Isolation vs. Frequency 70 65 60 55 50 45 40 35 30 0.0 0.1 0.2 0.3 0.4 0.5 Frequency (GHz) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.