Hardware/Software PRINTERS T107M Series Printers . . . . . . . . . . . . . . .135 T200 Series Printers . . . . . . . . . . . . . . . . .137 T300 Series Printers . . . . . . . . . . . . . . . . .138 T400 Series Printers . . . . . . . . . . . . . . . . .139 T612M-DS Printer . . . . . . . . . . . . . . . . . . .140 AM6310 Printer . . . . . . . . . . . . . . . . . . . . .141 LMS-6000 Laser Marking System . . . .142 LMS-9000 Laser Marking System . . . .143 BSC-100 Barcode scanners . . . . . . . . . .144 BSC-200 Hand held imager . . . . . . . . . .145 VLD-100 Hand held imager . . . . . . . . . .146 VRF-100 Data Matrix Verifier . . . . . . . .147 RIBBONS Thermal Transfer . . . . . . . . . . . . . . . . . . . .148 Dot Matrix . . . . . . . . . . . . . . . . . . . . . . . . . .154 SOFTWARE WinTotal . . . . . . . . . . . . . . . . . . . . . . . . . . . .156 PrintEasy . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 APPLICATION SYSTEMS Printers HL2010E/HL1910E hand held heater . . . . . . . . . . . . . . . . . . . .160 AMP-TY Nylon cable ties . . . . . . . . . . . . .161 AMP-TY Application Tool . . . . . . . . . . . .162 134 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 T107M Handheld Printer The new T107M from Tyco Electronics is perfect for the professional user who needs an affordable label printer for on-site applications that's tough and easy to use. Contractors, panel builders and facility managers will save time and money by using the special Hot Keys that provide labels at the touch of a button including wire and cable wraps,module marking, fixed length, serialization, vertical printing, barcodes, symbols and much more. The T107M offers clear, smudge-free high-performance labels that stick permanently to a variety of surfaces and provides remarkable MIL-spec print permanence on Heat Shrink Tubing. Print media is offered in easy-to-load cassettes and includes an optimized ribbon and choice of material: Heat-Shrink, Nylon Cloth, Vinyl, Polyester, and Polypropylene labels. Printer Specifications Printing Method Thermal Transfer Printhead (180 dpi) Dimensions 70 mm L x 114mm W x 212mm H Printer Weight 519g Keyboard ABC layout To access international characters: Rapid Accented Character Entry, according to the mobile phone principle. LCD Display 2 lines Rechargeable battery pack life indicator Display backlighting Operating conditions Temperature: 4°C to 40°C (39°F to 104°F) Storage conditions Temperature : 0°C to 90°C (32°F to 194°F) Humidity: 10% to 90% RH Hardware/Software Printers Humidity: 10% to 90% RH Product Order Code T107M-SMS-PRINTER-KIT-US Description Printer Kit - US power adaptor included T107M-SMS-PRINTER-KIT-UK Printer Kit - UK power adaptor included T107M-SMS-PRINTER-KIT-EU Printer Kit - European power adaptor included T107M-SMS-PRINTER-KIT-AUZ Printer Kit - Australia power adaptor included T107M-SMS-PRINTER-KITASI Printer Kit - Asia power adaptor included T107M-SMS-PRINTER-US Printer Only (US) T107M-SMS-PRINTER-EU Printer Only (European) SMS-US-A/C-ADAPTOR US A/C power adaptor SMS-EU-A/C-ADAPTOR European A/C power adaptor SMS-ASIA-A/C-ADAPTER UK & Asia A/C power adaptor SMS-AUZ-A/C-ADAPTOR Australian A/C power adaptor SMS-BATTERY-PACK Rechargeable battery pack SMS-CARRY STRAP Soft carry strap SMS-PRINTER-HARDCASE Hard case Printer Kit Contents Printer Rubber protection bumper User guide Six (6) AA batteries Power adaptor Hard carry case One (1) 19mm white flexible nylon tape printer cassette One (1) 9mm yellow heat-shrinkable tubing printer cassette Printers See page 136 for available printer cassettes and ordering information. Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 135 Hardware/Software Printers T107M Handheld Printer Cassettes Ordering Infornation T107M Cassettes Cable Diameter Description Material inches mm Length m Shrink Radio Color Technical Datasheet TTDS-122 SMS-TMS-3.9-4 Heat-shrink tubing 1.18 - 2.33 0.05 - 0.09 1.5 3:1 Yellow SMS-TMS-3.9-9 Heat-shrink tubing 1.18 - 2.33 0.05 - 0.09 1.5 3:1 White TTDS-122 SMS-TMS-5.2-4 Heat-shrink tubing 1.73 - 3.73 0.07 - 0.15 1.5 3:1 Yellow TTDS-122 SMS-TMS-5.2-9 Heat-shrink tubing 1.73 - 3.73 0.05 - 0.15 1.5 3:1 White TTDS-122 SMS-TMS-7.9-4 Heat-shrink tubing 2.97 - 5.13 0.12 - 0.20 1.5 3:1 Yellow TTDS-122 SMS-TMS-7.9-9 Heat-shrink tubing 2.97 - 5.13 0.12 - 0.20 1.5 3:1 White TTDS-122 SMS-TMS-13.2-4 Heat-shrink tubing 4.64 - 8.70 0.18 - 0.34 1.5 3:1 Yellow TTDS-122 SMS-TMS-13.2-9 Heat-shrink tubing 4.64 - 8.70 0.18 - 0.34 1.5 3:1 White TTDS-122 Length m Color Technical Datasheet Width Description inches Material mm SMS-NC-12-4 Nylon Cloth 12 0.47 3.5 Yellow TTDS-123 SMS-NC-12-9 Nylon Cloth 12 0.47 3.5 White TTDS-123 SMS-NC-19-9 Nylon Cloth 19 0.75 3.5 White TTDS-123 SMS-PPNA--6-9 Non-adhesive tag 6 0.24 5.5 White TTDS-124 SMS-PPNA-9-9 Non-adhesive tag 9 0.35 5.5 White TTDS-124 SMS-V-12-4 Colored vinyl 12 0.47 5.5 Yellow TTDS-125 SMS-V-12-9 Colored vinyl 12 0.47 5.5 White TTDS-125 SMS-V-19.2 Colored vinyl 19 0.75 5.5 Red TTDS-125 SMS-V-19-4 Colored vinyl 19 0.75 5.5 Yellow TTDS-125 SMS-V-19-5 Colored vinyl 19 0.75 5.5 Green TTDS-125 SMS-V-19-9 Colored vinyl 19 0.75 5.5 White TTDS-125 TTDS-126 SMS-WP-9-9 Polyester 9 0.35 5.5 White SMS-WP-12-9 Polyester 12 0.47 5.5 White TTDS-126 SMS-MP-12-8A Polyester 12 0.47 5.5 Metalized TTDS-127 TTDS-127 Polyester 19 0.75 5.5 Metalized SMS-CP-12-X Polyester 12 0.47 5.5 Clear SMS-CP-19-X Polyester 19 0.75 5.5 Clear Printers SMS-MP-19-8A 136 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 T200 Series portable thermal transfer printers The T200 series of printers are portable/desktop thermal transfer printers with a 4.1" print head offering an economical option for low volume customers who want to take advantage of thermal transfer printing technology. Their small, light weight design makes them ideal for applications requiring portability or in environments with multiple workstations where space is limited. The T208M has a 200 dpi printhead; the T212M has a 300 dpi printhead for crisp, high quality text, barcodes and graphic images. Both printers are designed for use with Tyco Electronics range of TMS heat shrinkable wire marker sleeves and limited thermal transfer printable pressure sensitive label products. T200 series printers are available with optional label spindle accessory. It externally holds a roll of labels on 3" core for easy dispensing. Printer Specifications Tyco Electronics T208M-TTDS-011 T212M-TTDS-064 Print head width 104mm (4.09") Print head resolution T208M: 8dpmm (203 dpi) Print speed (maximum) 51mm/sec (2 inch/sec) Media sensor Transmissive (fixed) T212M: 12dpmm (305 dpi) Reflective (fixed Memory T208M: 256KB SRAM and 512KB Flash Communication interface Parallel (Centronics), serial (RS232), Printer dimensions 200mm W x 247mm D x 171mm H Printer weight 1.81 kg (4 lbs) Shipping weight 4 kg (9 lbs) T212M: 512KB SRAM and 1MB Flash Hardware/Software Printers and USB (7.9" W x 9.75" D x 6.75" H) Media Specifications Maximum print width 104mm (4.09") Maximum media width 118mm (4.65") Minimum media width 28mm (1.12") Maximum media roll diameter 127mm (5.0") Media core diameter 25mm (1.0") Ribbon wind Ink side out Product Order Code Description T208M-PRINTER T208M thermal printer - standard T208M-C-PRINTER T208M thermal printer - cutter option T212M-PRINTER T212M thermal printer - standard T212M-C-PRINTER T212M thermal printer - cutter option T200-LABEL-SPINDLE External label roll holder for T200 printers Printers Only the T212M printer is recommended when printing size 3/32 (2.4mm) marker sleeves. Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 137 Hardware/Software Printers T300 Series High performance, cost effective thermal transfer printers The T300 series printers are high performance, yet cost effective thermal transfer printers with a 4.1" printhead. The rugged and durable all metal construction makes them suitable for demanding industrial and commercial environments. The enhanced memory and 32 bit processor provide fast data processing and print speeds. Optional accessories are available for added convenience and efficiency. The T308S and T308SN have a 200 dpi printhead for use with the Tyco Electronics range of thermal transfer printable pressure sensitive label products. The T308SN provides network capability for real time connectivity with the printer. With such connectivity, print jobs can be modified from any location over the Internet via Web-based tools. The T308SN printer is also capable of sending alerts via email enabled wired or wireless devices. The 300 dpi printhead on the T312S, T312M and T312Z produces crisp, high quality text, barcodes and graphic images. The T312S and T312Z are for use with Tyco Electronics thermal transfer printable pressure sensitive label products. The colorcoded operator cues and auto-calibration features make T312Z an affordable yet easy to use label printing system. The T312M is designed for use with Tyco Electronics TMS and HSI wire marker sleeves, as well as thermal transfer pressure sensitive label products. Printer specifications Tyco Electronics T308S-TTDS-054 T312M-TTDS-066 T312Z-TTDS-115 Print head width 104mm (4.09") Print head resolution T308S: 8dpmm (203 dpi) Print speed (maximum) T308S/T312M/T312S: 203mm/sec T312M/T312S/T312Z*: 12dpmm (305 dpi) (8 inch/sec) T312Z*: 154mm/sec (6 inch/sec) Media sensor Transmissive - adjustable Reflective (fixed) Memory T308S/T312M/T312S: 6MB DRAM and 2MB Flash T308SN: Additional 8MB flash memory in PCMCIA socket T312Z*: 4MB DRAM and 1MB Flash Communication interface Bi-directional parallel (Centronics) and serial (RS232) Printer dimensions T308S/T312M/T312S: 283mm W x 495mm D x 394mm H (11.2" W x 19.5" D x 15.5" H) T312Z*: 278mm W x 475mm D x 338mm H (10.93" W x 18.69" D x 13.32" H) Printer weight T308S/T312M/T312S: 25kg (55 lbs) Shipping weight T308S/T312M/T312S: 29kg (63 lbs) T312Z*:15kg (32.4 lbs) T312Z*:22kg (49 lbs) Media Specifications Maximum print width 104mm (4.09") Maximum media width 114mm (4.48") Minimum media width T308S/T312M/T312S: 20mm (0.76") Maximum media roll diameter 203mm (8.0") Media core diameter 76mm (3.0") Ribbon wind Ink side out T312Z*: 25.4mm (1.0") Printers Product order code Description T308S-PRINTER T308S thermal printer - standard T308S-C-PRINTER T308S thermal printer - cutter option T308S-R-PRINTER T308S thermal printer - internal rewind option T308SN-PRINTER T308S thermal printer - network capabilities T312SN T312S thermal printer - network capabilities T312S-PRINTER T312S thermal printer - standard T312S-C-PRINTER T312S thermal printer - cutter option T312S-R-PRINTER T312S thermal printer - internal rewind option T312M-PRINTER T312M thermal printer - standard T312M-R-PRINTER T312M thermal printer - internal rewind option T312Z-PRINTER T312Z thermal printer - standard* *Not available in Europe, Middle East or Africa 138 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 T400 Series High performance and high speed thermal transfer printers The T400 series printers are high performance thermal transfer printers with narrow to wide printheads suitable for variety of mission critical applications. The rugged and durable metal construction makes them a top choice for demanding industrial and commercial needs. The enhanced memory and dual 32-bit processor provide extremely fast data processing and print speeds. T400 series printers are the best option for high volume and 24 hour duty cycles. High speed of 12 inch/sec on T408M printers is well suited for the applications in which labels are needed quickly, either on demand or in batches. With the highest print resolution of 600 dpi printhead on the T424S produces unmatched quality of crisp, high quality text, barcodes and graphic images in a limited space - ideal for printing linear and 2-dimensional barcodes. Printer specifications Tyco Electronics T408M-TTDS-015 T424S-TTDS-116 Print head width T408M: 128mm (5.04") Print head resolution T408M: 8dpmm (203 dpi) Print speed (maximum) T408M: 305mm/sec (12inch/sec) Media sensor Transmissive and reflective T424S*: 81mm (3.2") T424S*: 23.5dpmm (600 dpi) T424S: 102mm/sec (4inch/sec) Reflective (fixed) Memory 16MB SDRAM and 4MB Flash Communication interface Bi-directional parallel (Centronics), serial (RS232), and USB 2.0 Printer dimensions T408M: The T408M is designed for use with Tyco Electronics TMS and HSI wire marker sleeves, as well as thermal transfer pressure sensitive label products. The T424S is ideal for use with Tyco Electronics thermal transfer printable pressure sensitive label products. Hardware/Software Printers 283.2mm W x 495.3mm D x 393.7mm H (11.15" W x 19.5" D x 15.5" H) T424S*: 263.5mm W x 495.3mm D x 393.7mm H (10.37" W x 19.5" D x 15.5" H) Printer weight T408M: 25kg (55 lbs) Shipping weight T408M: 29kg (63 lbs) T424S*:22.7kg (50 lbs) T424S*: 27kg (59 lbs) Media Specifications Maximum print width T408M: 128mm (5.04") T424S*: 81mm (3.2") Maximum media width T408M: 140mm (5.51") T424S*: 114mm (4.5") Minimum media width T408M: 40mm (1.57") T424S*: 20mm (0.76") Maximum media roll diameter 203mm (8.0") Media core diameter 76mm (3.0") Ribbon wind Ink side out Product order code Description T408M-PRINTER T408M thermal printer - standard T408M-R-PRINTER T408M thermal printer - internal rewind option T424S-PRINTER T424S thermal printer - standard* T400 Series printers are available with wider printhead configurations for speciality identification applications. Contact Tyco Electronics for such product requirements. Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Printers *Not available in Europe, Middle East or Africa 139 Hardware/Software Printers T612M–DS Double sided thermal transfer printer Specifically designed by Tyco Electronics, the T612M-DS printer answers a common need in heat-shrinkable wire and cable identification markers: single-pass printing onto both the front and back side of the markers simultaneously. Specifically developed and modified by Tyco Electronics for this application, the T612MDS is a high duty cycle, industrially robust thermal transfer printer. It will print onto the complete range of TMS System Six heat3 1 shrinkable markers in all sizes from /32" (2.4 mm) to 2 /4" (57.2 mm). The data printed onto the two sides of each marker can be identical or different, same side up or flipped. Printer specifications Tyco Electronics T612M-TTDS-098 Print head width 128 mm (5.04") Print head resolution 12 dpmm (304 dpi) Print speed (maximum) 50 to128 mm per second (2 [recommended] to 5 inches per second) Media sensor Transmissive and gap Memory 12MB DRAM and 1 MB flash Communication interface Parallel (centronics) and serial (RS232/422) Printer dimensions 559 mm W x 432 mm D x 508 mm H Printer weight 38 kg (84 lbs) Shipping weight 51 kg (112 ibs) (22" W x 17" D x 20" H) Media specifications Maximum print width 112mm (4.4") Maximum media width 117 mm (4.625") Maximum media roll diameter 254 mm (10.0") Media core diameter 26 mm (3.0") Ribbon wind Ink side out Product order code Description Tyco Electronics T612M-DS thermal printer – standard Printers T612M-DS-PRINTER 140 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 AM6310 Heavy duty dot matrix printer Specifically designed by Tyco Electronics, the AM6310 is a heavy duty industrial dot matrix printer with a high impact 24-pin print head. Automatic media thickness detection and a high impact print head make the AM6310 the best industrial printer available for heavy gauge wire marker and tag materials, and the 24-pin print head produces high quality text printing with fast print speeds. Standard AM6310 printer models are designed to print on Tyco Electronics HSI wire marker sleeves and dot matrix pressure sensitive label and tag products. AM6310D models are equipped with dual tractor mechanism necessary for guiding TMS sleeve product range. Such dual tractor models can also print on HSI and dot matrix label and tag product range. Printer specifications Tyco Electronics TTDS-002 Print head 24-pin high-impact dot matrix Print speed Max. high-speed draft: 600 cps at 12 cpi Print direction Bi-directional, logic seeking Control panel LCD, 12 keys, select-dial and quick access setup menu Feed mechanism Tractor (single or dual) Letter quality: 160 cps at 12 cpi Memory 2 MB flash Input buffer 80 KB Communication interface Parallel port (centronics 36-pin) and serial port (RS232/DB25) Printer dimensions 483 mm W x 427 mm D x 208 mm H Printer weight 18.1 kg (40 lbs) Hardware/Software Printers 19.0" W x 16.0" D x 8.2" H Media specifications Maximum print width 279 mm (11.0") Maximum media width 305 mm (12.0") Minimum media width 25 mm (1.0") Product order code Description AM6310-110V Tyco Electronics AM6310 dot matrix printer – standard 110 V AM6310-230V Tyco Electronics AM6310 dot matrix printer – standard 230 V AM6310D-110V Tyco Electronics AM6310 dot matrix printer – dual tractor 110 V AM6310D-230V Tyco Electronics AM6310 dot matrix printer – dual tractor 230 V New at Tyco Electronics. Ultra clean dot martrix labels! Process Improvement - Web Cleaning This 12" roller vacuum style construction helps to reduce waste, imrpove product quality and save production loss. Containments tend to attach themselves to the labels surface due to static electricity and moisture which require stringent cleaning techniques. Since implementing the web cleaners, we have seen huge improvements in the cleanliness of our label stock which has drastically reduced the potential for printing issues. Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Printers To address reported issues with our dot matrix label stock, we sought out equipment that would help us to remove containments from the label surface and imrpove overall printability. This contact cleaning/tacky roll system was integrated into our rewind tables to remove small to microscopic particles down to 1 micron from the label surface. Flood coating the web with black ink showed a cleaning efficiency that was beyond our expectations. 141 Hardware/Software Printers LMS6000 Laser Marking System The LMS6000 Laser Marking System is a fully functional, closedloop, Ytterbium doped fiber laser system that is fact, efficient, flexible and reliable. The LMS6000 system comes integrated with state-of-the-art software and transport systems. These integrated systems are capable of marking on a variety of flat label materials. Printer specifications Optional direct marking module provides the capability to mark on specific metallic and plastic components. The system comes complete with a fume extraction system to meet the strictest of emission and safety regulations. If validation is not required, the system can be fitted with an optional cutter used to cut the labels as they exit the marking chamber. Operating power 85-220V, 50-80Hz - laser 110V, 60 Hz - fume extractor Maximum output power 10 watts laser power, 0.5mJ Power consumption 350W Laser only Operating temperature 10-40˚C Humidity non-condensing 30-85% Weight: 42KG Laser type Ytterbium doped fiber laser, pulsed Q-switched Cooling system Air cooled Beam dimensions TEM-00 (M2<1.4), Plano Spherical 163 Wavelength 1062nm Pulse width 100nsec Pulse frequency 20-80MHz Pilot laser 650nm/1mW Laser protection class 4 Marking area 130mm x 130mm Resolution 725-1000 dpi Beam attenuator Galvo Mirrors, Safety shutter included Exhaust Integrated fume extractor with Rheostat control, filter layers and exhaust indicators Software specifications Operating system Wndows 2000 and XP, Pentium IV, 500-Mhz, 150 MB hard drive, USB Interface Graphics All standard dimensional, PLT, DXF, BMP, JPG,PCX, WMF, EPS, TIFF. all elements can be scaled, moved, grouped or mirrored Barcodes 1D - Code 39, Code 93, Code 128, Data Matrix - ECC200, QRCode All true type fonts under Windows, filled, out lined, laser specific double or triple line fonts. All fonts can be scaled or wobbled stretching, compressing, circular arc Industry standard ERP/MRP systems, databases and programs Laser Marking Systems Characters 142 Integration capabilities Product order code Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Description LMS6000-130 Tyco Electronics LMS6000 laser - standard LMS6000-XYZ30 Direct part marking module 300mm x 300mm LMS6000-XYZ80 Direct part marking module 800mm x 800mm LMS6000-XYZ100 Direct part marking module 1000mm x 1000mm - fume extractor unit LMS6000-FE-110V Integrated fume extractor system Verifier/Validator Part No. LMS6000-VRF-100, integrated data matrix verifier/validator Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Hardware/Software Printers LMS-9000 Laser Marking System The LMS-9000 laser marker is a low maintenance laser marking system designed for high volume users. It is a highly automated system including cutting to length, postmark rewinding and double sided, one step sleeve marking. Integrated with WinTotal marker sleeve/label marking software, it is designed for Tyco Electronics wire identification sleeves and selected labels. Features and benefits Simultaneous double-sided laser marking option for marker sleeves saves considerable time and eliminates any margin for error Optional handling system designed to handle several Tyco Electronics products Laser marking and cutting for kitting in one integrated step Virtually no product wastage during marking, thanks to a state of the art product recognition and jogging system Optional scoring and marking feature for label products Modular design for easy placement and re-installation Fully integrated software and hardware On screen diagnostics Meets all relevant US and European laser equipment standards Laser parameters pre-set and software controlled Product order code Tyco Electronics LMS-9000 Description TTDS-057 Tyco Electronics LMS-9000 laser – standard *Please contact your local Tyco Electronics representative for product configuration per your application. See page 168 for Laser Markable Label Materials and ordering information. Tyco Electronics also offers a pre-printing service to customers who need high quality, durable, permanent laser markers, yet do not want to invest in the purchase of LMS-9000 equipment at this time. All pre-printed laser markers, labels or tags are produced to out exacting quality, manufacturing standards and meet applicable mark permanence specifications. A variety of System Six and HSI products including TMS-SCE, D-SCE, HT-SCE, HL and HLX are available for pre-print base materials along with many label materials. Please contact your local Tyco Electronics representative to find out more about our laser pre-print services. Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Laser Marking Systems eliminates post print cutting and kitting 143 Hardware/Software Accessories BSC-100 Barcode scanners Tyco Electronics BSC-100 barcode scanners are cost effective, full featured, and fast barcode readers. These combine high image transfer speed with exceptional image quality. Their omnidirectional reading capability allows fast and easy reading of EANUCC composite codes, 2-dimensional (PDF417, datamatrix) and Postal codes. It comes with USB connection ready to "point and shoot" at a complicated looking 2-dimensional barcode or a simple linear code. It can be used in a wide range of commercial and industrial applications within government/postal, military, healthcare, logistics, manufacturing and retail sectors. General specifications Symbologies 2 Dimensional: PDF417, MicroPDF417, MaxiCode, DataMatrix, QR Code, Aztec, Aztec Mesas, Code 49 and EAN-UCC composite Linear: Codabar, Code 39, Interleaved 2 of 5, Code 93, Code 128, UPC, EAN, RSS, and Codablock Postal: Postnet, Planet Code, British Post, Canadian Post, Japanese Post, KIX OCR fonts: OCR-A, OCR-B Power Requirements 4.5 - 12 VDC - powered through USB port Physical Dimensions 81mm W x 135mm L x 157mm H Weight 184.3g (6.5 oz) (3.2" W x 5.3" L x 6.2" H) Product order code Description Barcode scanner - standard Scanners and Imagers BSC-100 144 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 BSC-200 Hand held imager • Read Area: The BSC-200 imager’s advanced “dual decode zone” technology allows the user to easily capture 2D symbols and linear bar codes at varying distances from 2” to 20” (50.8mm to 508mm). This wide read area allows the symbols to be decoded fast and reliably. Fast processing speeds also add to the BSC-200’s ability to acquire and decode multiple symbologies, with no adjustment of the imager required. • Ease of use: BSC-200 imagers feature point-and-click targeting with a red laser spot to quickly center the symbol in the field of view. Beeper, vibrator and multi-purpose LEDs provide realtime feedback to signal successful decoding. • Applications: The BSC-200 imager is a strong reading solution for applications needing to read linear bar codes and 2D symbologies with a portable handheld device. • System Integration: BSC-200 imagers are available in 2 configuration options: - Batch: A wireless way to collect thousands of decoded symbols for later download, capable of performing more than 4000 reads from a single battery charge and buffers a minimum of 1 MB of data in nonvolatile memory. (battery purchased separately) - Cabled: Cabled units include USB, RS-232. (RS-232 available through the purchase of optional connector kit - contact Tyco Electronics) • Symbologies: The BSC-200 automatically discriminates between all major 2D matrix and linear bar code symbologies, and offers time stamp capabilities for logging data. Symbologies include: 2D Symbologies: - MaxiCode - Aztec Code Imager specifications Imager dimensions 33mm H x 46mm W x 109mm D (1.3” H x 1.8” W x 4.3” D) Imager weight: 71.5 g (2.5 oz) not including cable Handle dimensions 96.5 mm H x 30 mm W x 36 mm D (1.8” H x 1.2” W x 1.4”D) Handle weight: 59.8 g (1.2 oz) not including cable Environmental Operating temperature 0˚C to 40˚C (32˚F to 104˚F) Storage temperature -20˚C to 60˚C (-4˚F to 140˚F) Humidity 5% to 90% (non-condensing) Electrical Power requirements 5 VDC (mA) Typical: Peak: Sleep 310 310 3 Read Parameters Pitch ±60˚C (front to back) Skew ±60˚ Tilt 360˚ Focal Range 50.8mm to 508mm (2” to 20”) Rotational Tolerance ±180˚ Print Control Resolution 25% (bar codes), 35% (PDF417), absolute dark/light reflectance differential measure at 650 nm Target Beam Visible laser diode at 630 nm, Class 2 Ambient Light Immunity Sunlight, up to 9,000’ candles 96,890 lux Shock Withstands multiple drops of 2m (6.5’) to concrete Product Order Code BSC-200 Hand held imager Scanners and Imagers The BSC-200 imager is a portable hand held solution for reading both linear bar codes and 2D symbols. The BSC-200 reads a wide range of bar code symbols created from a variety of printing and marking methods. - QR Code - Data Matrix (ECC 200) Stacked Symbologies: - UCC Composite - PDF417 (with Macro support) - Micro PDF417 Linear Bar Codes: - Codabar - Codablock F - GoCode - Code 93 - RSS - Code 39 - Code 128 - Standard postal codes - UPC/EAN/JAN - Int 2 or 5 • BSC-200 Accessories: - Long-life 1300 mA lithium-ion battery - Two-bay battery charger - RS-232 kit Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Hardware/Software Accessories Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 145 Hardware/Software Accessories VLD-100 Hand held imager/validator The VLD-100 Imager/Validator is optimized to read both linear bar codes and 2D symbols. It is an aggressive hand held imager/validator for decoding symbols on low contrast substrates such as metal, plastic, rubber, polyester, vinyl, Kapton, polyvinyl fluoride and glass. The VLD-100 can read marking methods such as dot peen, thermal transfer and laser/chemical etch. Containing custom optics and Tyco Electronics' decode algorithms, the VLD100 combines the decoding power of Tyco Electronics'popular smart camera, VRF-100, into a portable hand held device. • Optical Options: The VLD-100 hand held imager/validator is available in: - The high resolution version is custom designed to optimize resolution for reading small 2D symbols. • LightRay Optics Accessory: Tyco Electronic’s LightRay Optics solution further enhances its ability to read directly marked parts. By directing the illumination toward the symbol at off-axis angles, the LightRay Optics increase symbol contrast and filters out texture noise. The LightRay Optics are designed so that it is positioned at the correct focal distance and angle. No training is needed to find the best angles for reading low contrast symbols. Either optical accessory easily attaches on to the end of the VLD-100. Two options are available: the LightRay Optics 100 Series and the LightRay Optics 200 Series. LightRay Optics 100 Series generates off-axis diffuse illumination LightRay Optics 200 Series generates dark field illumination Scanners and Imagers • Ease of Use: The VLD-100 features point-and-click targeting with a red laser spot to quickly center the symbol in the field of view. Beeper, vibrator and multi-purpose LEDs provide real-time feedback to signal successful decoding. 146 Imager specifications Imager dimensions 33mm H x 46mm W x 109mm D 1.3”H x 1.8”W x 4.3” D) Imager weight: 71.5 g (2.5 oz) not including cable Handle dimensions 96.5 mm H x 30 mm W x 36 mm D (1.8” H x 1.2” W x 1.4”D) Handle weight: 59.8 g (1.2 oz) not including cable Environmental Operating temperature 0˚C to 40˚C (32˚F to 104˚F) Storage temperature -20˚C to 60˚C (-4˚F to 140˚F) Humidity 5% to 90% (non-condensing) Electrical Power requirements 5 VDC (mA) Typical: Peak: Sleep 310 310 3 Read Parameters Pitch ±60˚C (front to back) Skew ±60˚ Tilt 360˚ Focal Range 25 to 508 mm (1” to 20”) Rotational Tolerance ±180˚ Print Control Resolution 25% (bar codes), 35% (PDF417), absolute dark/light reflectance differential measure at 650nm Target Beam Visible laser diode at 630 nm, Class 2 Ambient Light Immunity Sunlight, up to 9,000’ candles 96,890 lux Shock Withstands multiple drops of 2m (6.5’) to concrete Product Order Code VLD-100 Hand held imager/validator • Applications: The VLD-100 provides outstanding performance validating challenging 2D codes. Automotive and Aerospace: reads codes marked on steel, iron, aluminum, rubber, and glass parts by laser etch, dot peen, metal stamp, and thermal transfer products. Electronics: reads codes laser etched on printed circuit boards and components. Department of Defense: reads UID codes on a variety of substrates. Software enables it to validate UII code format for suppliers and constructs the UID string for DoD operators • System Integration: All Tyco Electronics imagers are available in 2 configuration options: - Batch: A wireless way to collect thousands of decoded symbols for later download, capable of performing more than 4000 reads from a single battery charge and buffer a minimum of 1 MB of data in non-volatile memory. - Cabled: Cabled units include USB, RS-232. (RS-232 available through the purchase of optional connector kit - contact Tyco Electronics) Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. • Symbologies: The VLD-100 imager/validator reads all standard linear bar codes plus: 2D Symbologies: - Data Matrix (ECC 0200) - QR Code - MaxiCode - Aztec Code Stacked Symbologies: - UCC Composite - PDF417 (Macro Support) - Micro PDF417 Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 VRF-100 Production ready data matrix verifier The VRF-100 is an ISO/IEC 15415 and AS9132-compliant Data Matrix verifier for use in production environments. The VRF-100 helps to ensure that your marks will be verified accurately every time.Unlike most verifiers that are mounted on stands designed for the lab environment, the VRF-100 Verifier is a fully-contained, compact device that is easy to integrate into the production environment. The VRF-100 Verifier is factory-calibrated to specific traceability standards with a fully-contained housing, making it easy to integrate into existing applications. No on-site calibration of optics or lighting is needed to verify marks with the Verifier. Simply present the part to the Verifier, trigger, and receive the symbol quality report. • Production-Ready It is the first 2D verifier designed specifically for use in a production environment. Its compact, lightweight design makes the Verifier easy to integrate into production processes. A selfcontained, factory-calibrated system with flexible mounting allows the Verifier to be adapted to any application quickly and easily. • Calibrated System It provides the user with a ready-to-use, ISO/IEC 15426-2 calibrated system. Simply present the part, trigger, and the Verifier will output the results. The user is not required to focus the optics, set the light angles. Fixed optics and pre-set illumination angles make the verifier consistent, reliable and accurate. Imager specifications Imager dimensions 307 mm H x 127 mm W x 122 mm D (12.1” H x 5.0” W x 4.8” D ) Environmental Operating Temperature 0˚C to 40˚C (32˚F to 104˚F) Storage Temperature -50˚C to 75˚C (-58˚F to 167˚F) Humidity Up to 90% (non-condensing) Electrical Power Requirements Input, 10 to 28 VDC, 200 mV- P-P max. ripple, 270 mA at 24 VDC (typ. CMOS), 333 mA at 24 VDC (typ. CCD) Trigger, New Master, Input 1: (Optoisolated) 5 to 28 VDC rated (12 mA at 24 VDC) Outputs 1/2/3: (Optoisolated) 1 to 28 VDC rated, (I CE < 100 mA at 24 VDC, current limited by user) Hardware/Software Accessories Product Order Code VRF-100* Data matrix verifier *not available in Europe, Middle East, or Africa • Illumination Chamber The Verifier’s fully-enclosed illumination chamber provides the controlled lighting environment for accurate, repeatable verification. The chamber is specifically engineered to produce the illumination angles required by the ISO/IEC 15415 standard. • VRF Software Offers complete symbol verification reports in a variety of formats: PDF, CSV, HTML and RTF. Scanners and Imagers • ISO/ICE 15426-2 Certified The Verifier is ISO/IEC 15426-2 certified. It is precisely engineered to meet rigorous verification standards, ensuring accurate and consistent verification. • ISO/IEC 15415 Compliant The Verifier provides verification of 2D symbols for parameters: - Symbol contrast - Fixed pattern damage - Modulation - Reference decode - Axial non-uniformity algorithms - Grid non-uniformity - Unused error - Print growth (ungraded) correction • AS9132 Verifies Data Matrix symbols in accordance with the parameters called out in the AS9132 standard: - Quiet Zone - Dot ovality - Cell fill - Contrast - Dot center offset - Angle of distortion - Symbol type • MIL-STD 130 Requires verification of Data Matrix symbols to both ISO/IEC 15415 and AS9132 standards as required by the MIL STD 130 specification. Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 147 Hardware/Software Ribbons Thermal transfer ribbons General specifications RJS-4RPSCE Tyco Electronics RJS-4RPSCE is a high durability black resin thermal transfer ribbon tested and approved for use on Tyco Electronics TMS-SCE, RPS and HL cable markers wire marker sleeve products. For reliable print performance and durability use with Tyco Electronics recommended compatible printers. Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials 110 mm (4.33 inches) 300 meters (984 feet) Resin Black Ink side out T308S, T312M, T312Z**, T408M, T612M-DS, T312S TMS-SCE, RPS, SB, HL, HS, HC **Not available in Europe, Middle East or Africa Ordering information Product order code Description TMS-RJS-RIBBON-4RPSCE Tyco Electronics 4RPSCE thermal transfer ribbon for T308S, T312S, T312M, T312Z**, T408M and T612M-DS printers **Not available in Europe, Middle East or Africa 101-4RPSCE General specifications Tyco Electronics 101-4RPSCE is a high durability black resin thermal transfer ribbon tested and approved for use on Tyco Electronics TMS-SCE, RPS wire marker sleeve products and SB self-laminating labels. For reliable print performance and durability use with Tyco Electronics recommended compatible printers. Ribbons Tyco Electronics RJS-4HT is a high temperature black resin thermal transfer ribbon tested and approved for use on Tyco Electronics HT-SCE high temperature wire marker sleeve products. For reliable print performance and durability use with Tyco Electronics recommended compatible printers. Catalog 1654227 Revised 04-07 www.tycoelectronics.com 110 mm (4.33 inches) 74 meters (242 feet) Resin Black Ink side out T208M, T212M TMS-SCE, RPS, SB Ordering information Product order code Description TMS-101-RIBBON-4RPSCE Tyco Electronics 4RPSCE thermal transfer ribbon for T208M and T212M printers General specifications RJS-4HT 148 Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials 110 mm (4.33 inches) 300 meters (984 feet) Resin Black Ink side out T312M, T408M, T612M-DS HT-SCE, HTCM-SCE-TP (T312M only) Ordering information Product order code Description Dimensions not italicized are in millimeters while dimensions in inches are italicized. TMS-RJS-RIBBON-4HT Tyco Electronics 4HT thermal transfer ribbon for T312M, T408M and T612M-DS printers Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Thermal transfer ribbons General specifications 101-4HT Tyco Electronics 101-4HT is a high temperature black resin thermal transfer ribbon tested and approved for use on Tyco Electronics HT-SCE high temperature wire marker sleeve products. For reliable print performance and durability use with Tyco Electronics recommended compatible printers. Tyco Electronics 1910 is a high durability high contrast resin/wax thermal transfer ribbon tested and approved for use on the HLX-zero halogen cable marker tape and the HXTM-FB rail tags. For reliable print performance use with Tyco Electronics recommended printers. Ordering information Product order code Description TMS-101-RIBBON-4HT Tyco Electronics 4HT thermal transfer ribbon for T208M and T212M printers Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials Tyco Electronics 110 mm (4.33 inches) 210 meters (689 feet) Resin/wax Black Ink side out T408M HLX, HXTM-FB TTDS-080 Ordering information Product order code Description 1910-RIBBON-4T300 Tyco Electronics 1910 thermal transfer ribbon for T408M printers General specifications Tyco Electronics 1966-RIBBON is an ultra- high durability black resin thermal transfer ribbon tested and approved for use on Tyco Electronics HX, HX-SCE and D-SCE wire marker sleeves as well as CM-SCE-TP and HLX cable markers. See right for compatible materials. For reliable print performance and durability use with Tyco Electronics recommended compatible printers. T200-RIBBON-1966 Tyco Electronics T200RIBBON-1966 is an ultra- high durability black resin thermal transfer ribbon tested and approved for use on Tyco Electronics HX-SCE wire marker sleeves. See right for compatible materials. For reliable print performance and durability use with Tyco Electronics recommended compatible printers. Tyco Electronics Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printer Compatible materials TTDS-099 100 mm (3.9 inches) 300 meters (984 feet) Resin Black Ink side out T312M CM-SCE-TP, D-SCE, HLX, HS, HX, HXTM-FB, HX-SCE, HL Ordering information Product order code Description 1966-RIBBON Tyco Electronics 1966 thermal transfer ribbon for T312M General specifications Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials 100 mm (3.9 inches) 74 meters (242 feet) Resin Black Ink side out T212M HX-SCE, D-SCE, HLX-NEL Ribbons 1966 - RIBBON www.tycoelectronics.com 110 mm (4.33 inches) 74 meters (242 feet) Resin Black Ink side out T208M, T212M HT-SCE General specifications 1910 Catalog 1654227 Revised 04-07 Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials Hardware/Software Ribbons Ordering information Product order code Description Dimensions not italicized are in millimeters while dimensions in inches are italicized. T200-RIBBON-1966 Tyco Electronics 1966 thermal transfer ribbon for T212M Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 149 Hardware/Software Ribbons Thermal transfer ribbons 1330-0606 General specifications Tyco Electronics 1330-0606 is a high durability black resin thermal transfer ribbon tested and approved for use on Tyco Electronics thermal transfer printable pressure sensitive labels. See right for compatible materials. For reliable print performance and durability use with Tyco Electronics recommended compatible printers. 1330-0607 1330-0607-T200 Ribbons **Not available in Europe, Middle East or Africa Product order code Description 1330-0606-10 Tyco Electronics RHQ thermal transfer ribbon for all T300 and T400 printers Ribbon width* Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials 110 mm (4.33 inches) 300 meters (984 feet) Resin Black Ink side out T308S, T312M, T312S, T312Z**, T408M CP, HM, HMM, HPK, HW, MP, MV, NC, PVF, TN, TTP, WP, WV, TP, HLTM, SP * Available in additional sizes by custom quotation **Not available in Europe, Middle East or Africa Ordering information Product order code Description 1330-0607-10 Tyco Electronics RHD thermal transfer ribbon for all T300 and T400 printers Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials 110 mm (4.33 inches) 74 meters (242 feet) Resin Black Ink side out T208M, T212M HM, HMM, HW, MP, MV, NC, TN, TTP, WP, WV,HPK Ordering information Product order code Description 1330-0607-T200 Tyco Electronics RHD thermal transfer ribbon for T208M and T212M printers General specifications 1330-0619 Tyco Electronics 1330-0619 is a high temperature black resin thermal transfer ribbon tested and approved for use on Tyco Electronics thermal transfer printable Kapton® labels. See right for compatible materials. For reliable print performance and durability use with Tyco Electronics recommended compatible printers. www.tycoelectronics.com * Available in additional sizes by custom quotation Ordering information General specifications Tyco Electronics 1330-0607T200 is a high durability black resin thermal transfer ribbon tested and approved for use on Tyco Electronics thermal transfer printable pressure sensitive labels. See right for compatible materials. For reliable print performance and durability use with Tyco Electronics recommended compatible printers. Catalog 1654227 Revised 04-07 110 mm (4.33 inches) 300 meters (984 feet) Wax/Resin Black Ink side out T308S, T312M, T312S, T312Z**, T408M SB, NC, WP, HW, MP, HM, MV General specifications Tyco Electronics 1330-0607 is a high durability black resin thermal transfer ribbon tested and approved for use on Tyco Electronics thermal transfer printable pressure sensitive labels. See right for compatible materials. For reliable print performance and durability use with Tyco Electronics recommended compatible printers. 150 Ribbon width* Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials Ribbon width* Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials 110 mm (4.33 inches) 300 meters (984 feet) Resin Black Ink side out T308S, T312M, T312S, T312Z**, T408M T1K, T2K, TSK, T2Y, KTT * Available in additional sizes by custom quotation **Not available in Europe, Middle East or Africa Ordering information Product order code Description Dimensions not italicized are in millimeters while dimensions in inches are italicized. 1330-0619-10 Tyco Electronics RHT thermal transfer ribbon for all T300 and T400 printers Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Thermal transfer ribbons General specifications 1330-0600 Tyco Electronics 1330-0600 is a high quality black wax thermal transfer ribbon tested and approved for use on Tyco Electronics thermal transfer printable paper labels. See right for compatible material. For reliable print performance and durability use with Tyco Electronics recommended compatible printers. Ribbon width* Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials * Available in additional sizes by custom quotation Tyco Electronics 1330-0600T200 is a high quality black wax thermal transfer ribbon tested and approved for use on Tyco Electronics thermal transfer printable paper labels. See right for compatible material. For reliable print performance and durability use with Tyco Electronics recommended compatible printers. Product order code Description 1330-0600-10 Tyco Electronics RS thermal transfer ribbon for all T300 and T400 printers Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials 110 mm (4.33 inches) 74 meters (242 feet) Wax Black Ink side out T208M, T212M EP Ordering information Product order code Description 1330-0600-T200 Tyco Electronics RS thermal transfer ribbon for T200 printers General specifications 3300 Tyco Electronics 3300 is a high durability black resin thermal transfer ribbon tested and approved for use on Tyco Electronics thermal transfer printable pressure sensitive labels. See right for compatible materials. For reliable print performance and durability use with Tyco Electronics recommended compatible printers. Ribbon width* Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials 110 mm (4.33 inches) 300 meters (984 feet) Resin Black Ink side out T308S, T312S, T312M, T312Z, T408M PVF, TTVF * Available in additional sizes by custom quotation Ordering information Product order code Description 1330-3300-10 Tyco Electronics 3300 thermal transfer ribbon for all T300 and T408M printers White resin based ribbons are available to print on Tyco Electronics TMS-SCE wire marker sleeve products. For print performance and durability use with Tyco Electronics Electronics recommended compatible printers. Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials 110 mm (4.33 inches) 300 meters (984 feet) Resin White Ink side out T308S, T312S, T312Z**, T312M and T-408M TMS-SCE (T312M only), CP, TTP **Not available in Europe, Middle East or Africa Ordering information Product order code Description Dimensions not italicized are in millimeters while dimensions in inches are italicized. T300–RIBBON–WH Tyco Electronics thermal transfer ribbon for T300 and T400 printers Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Ribbons General specifications T300–WH www.tycoelectronics.com **Not available in Europe, Middle East or Africa Ordering information General specifications 1330-0600-T200 Catalog 1654227 Revised 04-07 110 mm (4.33 inches) 300 meters (984 feet) Wax Black Ink side out T308S, T312M, T312S, T312Z**, T408M EP Hardware/Software Ribbons 151 Hardware/Software Ribbons Thermal transfer ribbons General specifications T200–WH White resin based ribbons are available to print on Tyco Electronics TMS-SCE wire marker sleeve products. For print performance and durability use with Tyco Electronics recommended compatible printers. Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials Ordering information Product order code Description T200-RIBBON-WH Tyco Electronics thermal transfer white ribbon for T200 printers General specifications T300–WH–4HT White resin based ribbons are available to print on Tyco Electronics HT-SCE wire marker sleeve products. For print performance and durability use with Tyco Electronics recommended compatible printers. Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials T300–RIBBON–WH–4HT Tyco Electronics thermal transfer white ribbon for all T308M. T312M and T408M printers General specifications T200–WH–4HT White resin based ribbons are available to print on Tyco Electronics HT-SCE wire marker sleeve products. For print performance and durability use with Tyco Electronics recommended compatible printers. Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials Ribbons T200–RIBBON–WH–4HT Tyco Electronics thermal transfer white ribbon for T200 printers General specifications RHCA RHCA resin based ribbons are specifically designed to print on polyester or metalized polyester Tyco Electronics label products. For print performance and durability use with Tyco Electronics recommended compatible printers. It is not suitable to print on paper or self-laminating products. www.tycoelectronics.com 110 mm (4.33 inches) 74 meters (242 feet) Resin White Ink side out T212M HT-SCE Ordering information Product order code Description Catalog 1654227 Revised 04-07 114 mm (4.49 inches) 300 meters (984 feet) Resin White Ink side out T312M HT-SCE Ordering information Product order code Description 152 110 mm (4.33 inches) 70 meters (230 feet) Resin White Ink side out T208M, T212M TMS-SCE (T212M only) HM, MP, MV, TTP Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials 110 mm (4.33 inches) 91 meters (300 feet) Resin Red, Blue and Green (see ordering information below) Ink side out T308S, T312M, T312S, T312Z** and T408M CP, HW, HM, HPK, HMM, MP, MV, PVF, WP, WV **Not available in Europe, Middle East or Africa Ordering information Product order codes Description Dimensions not italicized are in millimeters while dimensions in inches are italicized. 1330-0620-10 (Red) 1330-0621-10 (Blue) 1330-0622-10 (Green) Tyco Electronics thermal transfer color ribbon for all T300 and T400 printers Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Thermal transfer ribbons General specifications RHCB RHCB wax-resin based ribbons are specifically designed to print on paper. For print performance and durability use with Tyco Electronics recommended compatible printers. Ribbon width Ribbon length Ink Standard color Ribbon wind direction Compatible printers Compatible materials 110 mm (4.33 inches) 300 meters (9840 feet) Wax-Resin Red, Blue and Green (see ordering information below) Ink side out T308S, T312M, T312S, T312Z** and T408M EP * *Not available in Europe, Middle East or Africa Ordering information 1330-0630-10 (Red) 1330-0631-10 (Blue) 1330-0632-10 (Green) Tyco Electronics thermal transfer color ribbon for all T300 and T400 printers Ribbons Product order codes Description Hardware/Software Ribbons Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 153 Hardware/Software Ribbons Dot matrix ribbons General specifications RIBBON A Tyco Electronics RIBBON A is a permanent black ink dot matrix ribbon tested and approved for use on Tyco Electronics TMSSCE wire marker sleeves and RMK-6 products on the LQ870 printer. See right for compatible materials. Ink Standard color Compatible printer Compatible materials Standard Black LQ870 CM-SCE, D-SCE, RMK-6, RPS, TMS-SCE Ordering information Product order code Description TMS-SYSTEM-SIX-RIBBON-A Tyco Electronics dot matrix Ribbon A for LQ870 printer General specifications QUICK-DRY LQ870 Ink Standard color Compatible printer Compatible materials RI Quick-Dry Black LQ870 C, DMVF, E, HLTM, K, M, NMX, PV, TW Ordering information Product order code Description 1330-0037-00 Tyco Electronics Quick-Dry dot matrix ribbon for LQ870 printer Ribbons Tyco Electronics QUICK-DRY LQ870 is a quick drying indelible black ink dot matrix ribbon tested and approved for use on Tyco Electronics dot matrix printable pressure sensitive labels on the LQ870 printer. See right for compatible materials. 154 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Dot matrix ribbons STANDARD AM6310 Tyco Electronics STANDARD AM6310 is a permanent black ink dot matrix ribbon tested and approved for use on Tyco Electronics wire marker sleeves and cable marker products on the AM6310 printer. See right for compatible materials. HIGH-PERF AM6310 Tyco Electronics HIGH-PERF AM6310 is a high performance, permanent black ink dot matrix ribbon tested and approved for use on Tyco Electronics wire marker sleeves and cable marker products on the AM6310 printer. See right for compatible materials. QUICK-DRY AM6310 Ink Standard color Compatible printer Compatible materials Standard Black AM6310, AM6310D CM-SCE, D-SCE*, HC, HL, HLTM-FB, HM, HS, RMK-6, RPS*, TMS-SCE*, MultiMark Ordering information Product order code Description 1892BK04-RIBBON Tyco Electronics standard dot matrix ribbon for AM6310 printer * Available only with AM6310D models General specifications Ink Standard color Compatible printer Compatible materials High performance Black AM6310, AM6310D HM, HX Ordering information Product order code Description 1892BK03-HIGH-PERF-RIBBON Tyco Electronics high performance dot matrix ribbon for AM6310 printer General specifications Ink Standard color Compatible printer Compatible materials RI Quick-Dry Black AM6310, AM6310D C, DMVF, E, HLTM, HPC, HPTM, K, M, NMX, PV, TW Ordering information Product order code Description 1892BK01 Tyco Electronics Quick-Dry dot matrix ribbon for AM6310 printer Ribbons Tyco Electronics QUICK-DRY AM6310 is a quick drying indelible black ink dot matrix ribbon tested and approved for use on Tyco Electronics dot matrix printable pressure sensitive labels on the AM6310 printer. See right for compatible materials. General specifications Hardware/Software Ribbons Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 155 Hardware/Software Software WinTotal Wire marker and label printing software WinTotal software is a powerful 32-bit label/marker design package that makes wire marker printing simple in an industrial environment. Running in the familiar Windows environment, the package is pre-loaded with all the Tyco Electronics wire identification products to facilitate marker design. The software features a highly graphical user interface to simplify operator training and minimize errors. The Windows environment gives access to a huge array of font options, including non-English fonts such as Chinese, Japanese and Hebrew (when used with appropriate operating systems or add-on software), and also allows simple importing and manipulation of graphics and logos. Bar code printing is available. WinTotal software supports all common wire identification needs, including: Manual printing Automatic set printing from spreadsheets, databases or other CAD systems (including Tyco Electronics’s HarnWare® harness design software package) Incremental alpha and numeric fields Double-sided marker printing Automatic or manual routing or multiple printers Paper output option Wraparound marker production User-defined products Programmable buttons for repeated data insertion The software can be password protected at different levels to prevent unauthorized use, and can be run on networked computers so that the design function can be separated from printing. The display can be set to several different languages, and a full on-screen Help function is incorporated. Running behind the simple WinTotal user interface is a powerful label-making package, so the software can be used to design and print general labeling applications such as rating plates and shipping labels. Software Features and benefits Powerful wire marker design and print software Familiar Windows user environment Pre-loaded with Tyco Electronics identification products Powerful import and export functions: reads wire lists from spreadsheets, databases and text files from CAD systems Printer multi-tasking Multiple on-screen languages Specifications 156 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. TTDS-001 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 WinTotal Wire marker and label printing software Features and benefits (continued) Support Double sided marker printing Free technical support Local or network printer support OS Support: Windows 95, 98, ME, NT, 2000, XP Number of identical or serialized copies selectable International language support from database Label design Serialization WYSIWYG label design and display Increment or decrement by any interval Align text left, right, justified or center Numeric, alphanumeric and custom base serialization Built-in printer font support Windows True Type fonts Lines, boxes and graphic images Resize, rotate and stretch text, graphics and bar codes Thumbnail preview of saved labels Hardware/Software Software Database options Microsoft ODBC support, including: Access, Excel and dBase ASCII text files AutoCAD importing Data management Printing Set and batch printing capabilities Multiple application port printing (MAPP) Visual Basic scripting for custom data processing. Sharable data fields Multiple products within one set or batch Minimum recommended computer configuration Computer IBM-compatible PC Processor Intel Pentium® processor, 400 MHz minimum RAM 64 MB minimum (128 MB for Windows NT, 2000 and XP) Operating system Windows 95, 98, ME or NT (Service pack 6), 2000 and XP Disk space required 25 MB minimum Other technical information Barcode types Codabar, code 39, code 93, code 128, EAN-13, EAN-8, UPC-E, Interleaved 2/5, ITF (DUN14), PDF 417, DataMatrix Company logo or graphics Can be imported in BMP, PCX, MSP, WMF, JPG, JIF, GIF formats Text and graphics Can be rotated, moved or resized Ordering information Product description TMS-WINTOTAL-SWARE Tyco Electronics Wire Marker Printing Software – Windows, 32 bit Software Ordering description Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 157 Hardware/Software Software PrintEasy Label printing software Tyco Electronics PrintEasy is a powerful yet easy to use Windows based label design and printing software. With PrintEasy you can quickly and easily combine bar codes, text and graphics into professional quality labels. Carefully organized menus and pop-up dialogs display all your options in plain, easy to understand words. The true WYSIWYG display allows you to create and view your labels with precision, giving you total control over your labels’ appearance before printing. PrintEasy is ideal for use with the Tyco Electronics range of thermal transfer printable pressure sensitive label products. PrintEasy is pre-loaded with all of Tyco Electronics’s standard thermal transfer label templates, which allows you to simply select the Tyco Electronics part number you want to print and you are ready to go! Features and Benefits Support Bar codes Free technical support Numerous 1D and 2D symbologies OS Support: Windows 95, 98, ME, NT, 2000, XP Unlimited width and height International language support Sequentially numbered bar codes Place characters above or below bar codes or do not print Option to display Start/Stop characters Able to print MIL-STD-130 UID Syntax Software Label design True WYSIWYG label design and display Built-in printer font support Windows True Type fonts Reverse (white on black) text printing Align text left, right, justified or center Unlimited Undo/Redo command Lines, boxes and graphic images Import graphics in BMP, JPG, TIF, PCX, DCX, DIB, EPS and others Printing Resize, rotate and stretch objects Thumbnail preview of saved labels. Metric and US measurement systems Specifications 158 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Printer-based bar codes and serial numbers Speed optimization using repetitive data control Local or network printer support Performance-enhancing printer controlled serialization Number of identical or serialized copies selectable from database TTDS-093 Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 PrintEasy Label printing software Features and Benefits (continued) Serialization Data management Increment or decrement by any interval Visual Basic scripting for custom data processing Separate Rollover/Rollunder and Value Reset options User-definable minimum and maximum field lengths Preserve or expand field length when rolling over Customizable data-entry filters and error checking Numeric, alphanumeric and custom base serialization Multi-data source selection per label object Easy entry of special and unprintable control characters Sharable data fields Customizable message box handling Database options Microsoft ODBC support, including: Access, Btrieve dBase, Excel, Oracle, Paradox, Clipper, FoxPro, Interbase and more. ASCII text files Integration SAP (mySAP.com and R/3) Command line interface option Versatile multiple-table data access Pre-loadable into “background” to avoid start-up delays Import variable graphics from databases Dynamically selectable label formats and data sources Data query wizard Error logging Individual record-picking at print time Hardware/Software Printers Minimum recommended computer configuration Computer IBM-compatible PC Processor Intel Pentium® processor, 200 MHz minimum RAM 32 MB minimum Operating system Windows 95, 98, ME or NT (Service pack 6), 2000 and XP Disk space required 15MB to 80 MB minimum (depending on installation options) Ordering information Ordering description Product description PRINTEASY –BASIC Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser and Inkjet printers** PRINTEASY –ECC4 Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser, Inkjet, ECC4 and T200 printers** PRINTEASY –PRO Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser and Inkjet and Full Thermal Transfer support PRINTEASY –SUITE Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser and Inkjet and Full Thermal Transfer support PRINTEASY –NET05 Tyco Electronics Label Printing Software – Windows, – Network version with 5 user license PRINTEASY –NET10 Tyco Electronics Label Printing Software – Windows, – Network version with 10 user license Software with additional modules **Available in Europe, Middle East and Africa Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 159 Hardware/Software Application Systems HL2010E/HL1910E The HL2010E and HL1910E Hot air heaters are designed to work with a standard line voltage (230V) on a wide variety of Raychem heat-shrinkable products. These tools are suitable for occasional use and are not recommended for applications requiring high duty cycles. Both tools supply forced hot air with an adjustable heat setting to meet the requirements of many different installation situations. A three position switch controls the air flow (150/300/500 l/min). The HL2010E tool is switched on and off at the three-stage switch and the temperature can be continuously adjusted over a range of 50˚C -630˚C by the pushbuttons. The temperature can be increased or reduced by 10˚C steps. An LCD display shows the actual temperature. The HL1910E tool is switched on and off at the two-stage switch and the temperature can be continuously adjusted over a range of 50˚C - 600˚C at the thumbwheel (the numbers on it serve as a guide only, 1 means 50˚C and max. temperature of 600˚C is attained at 9). A bench stand allowing use of both the HL2010E and the HL1910E as a bench tool is available as an option. Furthermore, it requires only two reflectors to cover most applications of heatshrinkable tubing and SolderSleeve terminations. Specifications Voltage Power Air flow Weight Length Noise 230V AC 2000W 150 - 500 l/min 920g 280mm <70 dB *Available in Europe only Ordering description Product description HL2010E-230V-Euro HL2010E-230V-UK HL2010E-Kit-230V-Euro C99451-000 A22932-000 A23120-000 HL1910E-230V tool HL1910E-230V-Euro HL1910E-230V-UK HL1910E-Kit-230V-Euro F30529-000 F11734-000 A93538-000 Accessories Application Systems 160 PCN HL2010E-230V tool HL2010E/HL1910E tool HL1802E-074616-SolderSleeve Terminators Reflector 832011-000 HL1802E-070519-Heat-shrinkable 022611-000 Tubings Reflector HL1802E-070618 -9mm Adaptor 930321-000 HL1802E-070717-14mm Reduction Nozzle 868259-000 HL1802E-070816-20mm 613361-000 Reduction Nozzle HL1802E-ADAP-PR-Adaptor 444817-000 for PR Series Reflector HL1802E - Bench-Std 717083-000 The HL2005E heatgun is supplied with a 3 year warranty statement by Steinel. This warranty does not apply when used in a manufacturing environment as opposed to a DIY environment. The 12 month warranty usually offered by Tyco on all tooling applies (see conditions in warranty statement). Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Hardware/Software Cable Marker Tools and Accessories AMP-TY Nylon cable ties AMP-TY All-Nylon Cable Ties provide a strong, durable way to bundle and harness cable quickly and economically. They can be used on virtually any bundle configuration, in diameters ranging from 1/16 [1.58] to 10 [254.00]. AMP-TY Cable Ties are resistant to common solvents, alkalies, dilute acids, oils and greases. All packages are heat sealed to retain moisture. Do not open package until you are ready to apply the ties. Features and benefits Self-locking application by hand or hand tool provides versatility Tapered tip speeds up threading and reduces applied cost Interior serrations help hold individual wires in place through friction Tough, smooth nyon may be used in outdoor and indoor applications. Black, UV-resistant ties are rcommended for outdoor use Specific parts meet the requirements of MIL-S-23190. See MS3367 and MS3368 part number notations All-nylon design eliminates metal components Recognized under the Component Program of Underwriters Laboratories Inc., File No. E73541 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Fast and Easy to Apply Dimensions not italicized are in millimeters while dimensions in inches are italicized. 1. Gather cables together. 2. Apply hand-tight. 3. Snug-up with tool. 4. Finished tie holds cables firmly. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Application Systems R 161 Hardware/Software Cable Marker Tools and Accessories AMP-TY Nylon cable tie accessories Accommodates ties with maximum tensile strength of 50 lbs. [222.5 N] Part No. 1-350087-0 Package of 100 Cable Tie Mount (Screw Type) Part No. 2-350087-0 Package of 1000 Note: Screw not included Two-Way Cable Tie Mount Permits entry from two sides. Available in two sizes. R 0.38 [9.65] x 0.6 [15.24], #6 Screw Hole, without Adhesive Back. Accommodates ties with maximum tensile strength of 50 lbs. [222.5 N] Part No. 608801-1 Package of 100 1.13 [28.70] x 1.13 [28.70] , #6 Screw Hole, with Adhesive* Back. Accommodates ties with maximum tensile strength of 50 lbs. [222.5 N] Part No. 608800-1 Package of 100 Four-Way Cable Tie Mount Permits entry from four sides. Available in two sizes. 0.75 [19.05] x 0.75 [19.05], two #4 Screw Holes, with Adhesive* Back. Accommodates ties with maximum tensile strength of 30 lbs. [133.5 N] Part No. 608802-1 Package of 100 1.13 [28.70] x 1.13 [28.70], two #8 Screw Holes, with Adhesive* Back. Accommodates ties with maximum tensile strength of 50 lbs. [222.5 N] Part No. 608803-1 Package of 100 Application Systems Cable Tie Swivel Mount 162 with Adhesive Back and Screw Holes (0.187 [4.75] Dia.) 1 [25.4] x 1 [25.4], two 0.187 [4.75] Dia. Screw Holes, with Adhesive Back. Accommodates ties with maximum tensile strength of 30 lbs. [133.5 N] Part No. 607847-1 Package of 100 *The rubber-based adhesive backing on these mounts has a tensile strength of 6 lbs. [26.7 N] per square inch. This rating applies in temperatures from -50°F [-45°C] to 180°F [82°C]. For best performance, mounts should be applied to a smooth, clean, dry, and oil-free surface. AMP-TY Application Tool Economy Application Tool Catalog 1654227 Revised 04-07 www.tycoelectronics.com Part No. 734587-1 (Color — blue) IS 408-8816 Tool operates on cable ties up to 50 lbs. [222.5 N] tensile value. It has a tensionadjustment and cuts off the end of the tie. Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Hardware/Software Application Systems Application Systems Engineering Notes Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 163