APL1187 600mA Low Dropout Fast Response Positive Fixed 1.2V Regulator Features General Description • • • • • • • • • • • The APL1187 is a low dropout three-terminal adjustable regulators with 0.6A output current capability. In order to obtain lower dropout voltage and faster transient response, which is critical for low voltage applications, the APL1187 has been optimized. Guaranteed Output Voltage Accuracy within 2% Fast Transient Response Guaranteed Dropout Voltage at Multiple Currents Load Regulation : 0.4% Typ. Line Regulation : 1mV Typ. The device is available in 1.2V with an input supply below 9V. Dropout voltage is guaranteed at a maximum of 1.55V at 0.6A. Low Dropout Voltage : 1.4V Typ. at IOUT = 600mA Current Limit : 0.8A Min. at TJ=25°C On-Chip Thermal Limiting : 150°C Typ. Current limit is trimmed to ensure specified output current and controlled short-circuit current. On-chip thermal limiting provides protection against any combination of over load t hat wo uld cre ate excessive junc tion temperatures. Fixed Output : 1.2V Standard 3-pin, SOT-89 and SOT-223 Package Lead Free Available (RoHS Compliant) The APL1187 is available in the industry standard 3-pin, SOT-89 and SOT-223 package. Typical Application Circuit Applications • • • • • • • APL1187 VIN VIN + 10µF VOUT VOUT + GND 10µF Voltage Regulator for CD-ROM Drivers Voltage Regulator for LAN Cards Voltage Regulator for mother Boards Wireless Communication Systems Portable Instrument Portable Consumer Equipment Low Voltage Systems Ordering and Marking Information Package Code D: SOT-89 V : SOT-223 Operating Ambient Temperature Range E : -20 to 70° C Handling Code TU : Tube TR : Tape & Reel Voltage Code 12 : 1.2V Blank : Adjustable Version Lead Free Code L : Lead Free Device Blank : Original Device APL1187Lead Free Code Handling Code Temperature Range Package Code APL1187-12 D: APL1187 XXXXX12 XXXXX - Date Code APL1187-12 V: APL1187 XXXXX12 XXXXX - Date Code Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which are fully compliant with RoHS and compatible with both SnPb and lead-free soldiering operations. ANPEC lead-free products meet or exceed the leadfree requirements of IPC/JEDEC J STD-020C for MSL classification at lead-free peak reflow temperature. ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. A.2 - Nov., 2006 1 www.anpec.com.tw APL1187 Pin Configurations SOT-89 Top View VOUT 1 SOT-223 Top View VOUT 1 GND (Tab) GND 2 VIN 3 GND (Tab) GND 2 VIN 3 APL1187 APL1187 Absolute Maximum Ratings Symbol (Note 1,2) Parameter VI Input Voltage PD Power Dissipation, TA=25°C TJ Operating Junction Temperature Range TSTG TL θJA θJC Rating Storage Temperature Range Unit 9 V 1.3 W 0 to 150 °C -65 to +150 °C 260 °C 130 75 °C/W 40 15 °C/W Lead Temperature (Soldering, 10 second) Thermal Resistance from Junction to Ambient SOT-89 SOT-223 Thermal Resistance from Junction to Case SOT-89 SOT-223 Note 1: Stresses beyond the absolute maximum rating may damage the device and operating in the absolute maximum rating conditions may affect device reliability. Note 2: The maximum allowable power dissipation at any TA (ambient temperature) is calculated using: PD (max) = (TJ – T A) / θJA; TJ = 125°C. Exceeding the maximum allowable power dissipation will result in excessive die temperature. Electrical Characteristics Symbol VOUT VIN Parameter Output Voltage APL1187-12 Test Conditions TJ =0~125°C, 0≤ IOUT≤ 0.6A, 2.8V≤VIN≤9V, Input Voltage APL1187 Unit Min Typ Max 1.176 1.200 1.224 V 9 V 6 mV 2.8 REGLINE Line Regulation APL1087-12 TJ =0~125°C, IOUT=0mA, 2.8V≤VIN≤9V (note3) 1 REGLOAD Load Regulation APL1187-12 TJ =0~125°C, VIN=2.8V, 0≤ IOUT ≤0.6A (note 3) 0.4 0.6 % VD Dropout Voltage IOUT=0.6A, TJ =0~125°C 1.4 1.55 V Current Limit (VIN -VOUT)=5V, TJ=25°C 800 Ripple Rejection FRIPPLE=120Hz, VRIPPLE=1VP-P, (VIN -VOUT)=3V, TJ=0~125°C 60 ILIMIT PSRR OT Over Temperature Point OTP Hysteresis IQ Quiescent Current APL1187-12 mA 75 dB 150 °C 20 °C TJ=0~125°C, VIN≤9V 5.5 10 mA Note 3: See thermal regulation specifications for changes in output voltage due to heating effects. Load line regulations are measured at a constant junction temperature by low duty cycle pulse testing. Note 4: Dropout voltage is specified over the full output current range of the device. Dropout voltage is defined as the minimum input/output differential measured at the specified output current. Test points and limits are also shown on the Dropout Voltage curve. Copyright ANPEC Electronics Corp. Rev. A.2 - Nov., 2006 2 www.anpec.com.tw APL1187 Typical Operating Characteristics Load Transient Response Line Transient Response 3.5 VIN -5 2 -10 1.5 -15 1 IOUT -20 0.5 0 -25 -30 -0.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 50 7 40 6 4 10 3 V OUT 0 2 -10 1 0 0.2 0.4 0.6 0.8 Time (ms) 1 1.2 1.4 1.6 1.8 2 0 Time (µs) Current Limit vs. Temperature Current Limit vs. Input Voltage 940 940 920 930 920 880 Current Limit (mA) 900 Current Limit (mA) 5 20 -20 1 V IN 30 Input Voltage (V) 2.5 0 Output Voltage Deviation (mV) 3 5 Output Current (A) Output Voltage Deviation (mV) 10 VIN=5V 860 840 820 800 910 900 890 880 870 860 850 780 840 760 -50 830 0 50 100 150 4 5 Temperature (°C) 7 8 9 Input Voltage (V) Load Regulation vs. Output Current Dropout Voltage vs. Output Current 8 1.8 7 1.6 6 Dropout Voltage (V) Load Regulation(mV) 6 VIN=5V 5 4 3 2 1.4 1.2 1 0.8 0.6 1 0 0.4 100 200 300 400 500 600 700 800 0 Output Current (mA) Copyright ANPEC Electronics Corp. Rev. A.2 - Nov., 2006 200 400 600 800 Output Current (mA) 3 www.anpec.com.tw APL1187 Typical Operating Characteristics (Cont.) Output Voltage vs. Tempeture 1.205 Output Voltage (V) 1.2 1.195 1.19 1.185 1.18 1.175 1.17 -50 -25 0 25 50 75 100 125 150 Tempeture (°C) Copyright ANPEC Electronics Corp. Rev. A.2 - Nov., 2006 4 www.anpec.com.tw APL1187 Packaging Information SOT89 A C L H E E1 D D1 e e1 B B1 SOT89 S Y M B O L A MIN. MAX. MIN. MAX. 1.40 1.60 0.055 0.063 B 0.44 0.56 0.017 0.022 B1 0.36 0.48 0.014 0.019 C 0.35 0.44 0.014 0.017 D 4.40 4.60 0.173 0.181 0.072 MILLIMETERS INCHES D1 1.62 1.83 0.064 E 2.29 2.60 0.090 0.102 2.29 0.084 0.090 E1 2.13 e 1.50 BSC e1 0.059 BSC 3..00 BSC 0.118 BSC H 3.94 4.25 0.155 0.167 L 0.89 1.20 0.035 0.047 Copyright ANPEC Electronics Corp. Rev. A.2 - Nov., 2006 5 www.anpec.com.tw APL1187 Packaging Information SOT223 D b2 E E1 SEE VIEW A e c 0.25° L b 0 A A1 A2 e1 GAUGE PLANE SEATING PLANE VIEW A S Y M B O L SOT223 MILLIMETERS MIN. INCHES MAX. A MIN. MAX. 1.80 0.071 A1 0.02 0.10 0.001 0.004 A2 1.50 1.70 0.059 0.067 b 0.66 0.84 0.026 0.033 b2 2.90 3.10 0.114 0.122 0.013 c 0.23 0.33 0.009 D 6.30 6.70 0.248 0.264 0.287 0.146 E 6.70 7.30 0.264 E1 3.30 3.70 0.130 e 2.30 BSC 0.091 BSC e1 4.60 BSC 0.181 BSC L 0 0.030 0.75 0° Copyright ANPEC Electronics Corp. Rev. A.2 - Nov., 2006 0° 10 ° 6 10 ° www.anpec.com.tw APL1187 Carrier Tape & Reel Dimensions t D P Po E P1 B o F W Ko Ao D1 T2 J C A B T1 Application SOT-89 A B C J T1 T2 W P E 178 ±1 70 ± 2 13.5 ± 0.15 3 ± 0.15 14 ± 2 1.3 ± 0.3 8 ± 0.1 1.75± 0.1 F D D1 Po P1 Ao 12 + 0.3 12 - 0.1 Bo Ko T 5.5 ± 0.05 1.5± 0.1 Application SOT-223 1.5± 0.1 4.0 ± 0.1 2.0 ± 0.1 4.8 ± 0.1 A B C 330±1 62±1.5 12.75± 0.15 F D D1 Po 1.5+ 0.1 4.0 ± 0.1 5.5 ± 0.05 1.5+ 0.1 J T1 4.5± 0.1 T2 W 2± 0.2 12 ± 0.3 P1 Ao 2.0 ± 0.05 6.9 ± 0.1 2 ± 0.6 12.4 +0.2 1.80± 0.1 0.3±0.013 P E 8 ± 0.1 1.75± 0.1 Bo Ko T 7.5± 0.1 2.1± 0.1 0.3±0.05 (mm) Cover Tape Dimensions Application Carrier Width Cover Tape Width Devices Per Reel SOT- 89 12 9.3 1000 SOT- 223 12 9.3 2500 Copyright ANPEC Electronics Corp. Rev. A.2 - Nov., 2006 7 www.anpec.com.tw APL1187 Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material: 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition (IR/Convection or VPR Reflow) tp TP Critical Zone TL to TP Ramp-up Temperature TL tL Tsmax Tsmin Ramp-down ts Preheat 25 t 25°C to Peak Time Classification Reflow Profiles Profile Feature Average ramp-up rate (TL to TP) Preheat - Temperature Min (Tsmin) - Temperature Max (Tsmax) - Time (min to max) (ts) Time maintained above: - Temperature (TL) - Time (tL) Peak/Classificatioon Temperature (Tp) Time within 5°C of actual Peak Temperature (tp) Ramp-down Rate Time 25°C to Peak Temperature Sn-Pb Eutectic Assembly Pb-Free Assembly 3°C/second max. 3°C/second max. 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds 183°C 60-150 seconds 217°C 60-150 seconds See table 1 See table 2 10-30 seconds 20-40 seconds 6°C/second max. 6°C/second max. 6 minutes max. 8 minutes max. Notes: All temperatures refer to topside of the package. Measured on the body surface. Copyright ANPEC Electronics Corp. Rev. A.2 - Nov., 2006 8 www.anpec.com.tw APL1187 Classification Reflow Profiles (Cont.) Table 1. SnPb Entectic Process – Package Peak Reflow Temperatures 3 3 Volume mm ≥350 225 +0/-5°C 225 +0/-5°C Volume mm <350 240 +0/-5°C 225 +0/-5°C Package Thickness <2.5 mm ≥2.5 mm Table 2. Pb-free Process – Package Classification Reflow Temperatures 3 3 3 Volume mm Volume mm Volume mm <350 350-2000 >2000 <1.6 mm 260 +0°C* 260 +0°C* 260 +0°C* 1.6 mm – 2.5 mm 260 +0°C* 250 +0°C* 245 +0°C* ≥2.5 mm 250 +0°C* 245 +0°C* 245 +0°C* * Tolerance: The device manufacturer/supplier shall assure process compatibility up to and including the stated classification temperature (this means Peak reflow temperature +0°C. For example 260°C+0°C) at the rated MSL level. Package Thickness Reliability Test Program Test item SOLDERABILITY HOLT PCT TST ESD Latch-Up Method MIL-STD-883D-2003 MIL-STD-883D-1005.7 JESD-22-B,A102 MIL-STD-883D-1011.9 MIL-STD-883D-3015.7 JESD 78 Description 245°C, 5 SEC 1000 Hrs Bias @125°C 168 Hrs, 100%RH, 121°C -65°C~150°C, 200 Cycles VHBM > 2KV, VMM > 200V 10ms, 1tr > 100mA Customer Service Anpec Electronics Corp. Head Office : No.6, Dusing 1st Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright ANPEC Electronics Corp. Rev. A.2 - Nov., 2006 9 www.anpec.com.tw