PL01S/D Series 1W DC/DC CONVERTER, SIP-Package, Wide 2:1 Input Range FEATURES Efficiency up to 80% Wide 2:1 lnput Range Fully regulated Outputs Operating Temperature Range -40°C to +85°C Low Ripple and Noise Isolation Voltage 1500VDC Short-circuit Protection Lead free, RoHs Compliant 3 Years Product Warranty The PL01S/D series are miniature, SIP Package, isolated 1W DC/DC converters with 1,500VDC isolation. It offers continuous short circuit protection and allows a wide operating temperature range of –40°C to +85°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc Model List Model Number PL01S0505A PL01S0512A PL01S0515A PL01D0512A PL01D0515A PL01S1205A PL01S1212A PL01S1215A PL01D1212A PL01D1215A PL01S2405A PL01S2412A PL01S2415A PL01D2412A PL01D2415A PL01S4805A PL01S4812A PL01S4815A PL01D4812A PL01D4815A Input Voltage (Range) Output Voltage VDC VDC 5 12 15 ±12 ±15 5 12 15 ±12 ±15 5 12 15 ±12 ±15 5 12 15 ±12 ±15 5 (4.5 ~ 9) 12 (9 ~ 18) 24 (18 ~ 36) 48 (36 ~ 75) Output Current Input Current Max. @Max. Load @No Load mA 200 83 67 ±42 ±33 200 83 67 ±42 ±33 200 83 67 ±42 ±33 200 83 67 ±42 ±33 mA(typ.) 263 259 254 262 254 108 108 105 106 106 54 52 52 53 52 27 27 27 27 26 mA(typ.) 40 20 10 7 Max. capacitive Load Reflected Ripple current µF 1680 820 680 470* 330* 1680 820 680 470* 330* 1680 820 680 470* 330* 1680 820 680 470* 3308 mA (typ.) 80 40 30 20 Efficiency (typ.) @Max. Load % 76 77 79 77 78 77 77 80 79 78 77 80 80 80 80 77 78 78 79 79 * For each output DS_PL01S/D_07192012 E-mail: [email protected] http://www.delta.com.tw/dcdc P1 Input Characteristics Parameter Input Surge Voltage (1 sec. max.) Start-Up Threshold Voltage Model Min. Typ. Max. 5V Input Models -0.7 --- 15 12V Input Models -0.7 --- 25 24V Input Models -0.7 --- 50 48V Input Models -0.7 --- 100 5V Input Models --- --- 4.5 12V Input Models --- --- 9 24V Input Models --- --- 18 48V Input Models --- --- 36 Internal Filter Type All Models Unit VDC Capacitor Output Characteristics Parameter Output Voltage Setting Accuracy Line Regulation Load Regulation Min.Load Ripple & Noise (20MHz) Transient Recovery Time Temperature Coefficient Short Circuit Protection Conditions Min. At 50% Load and Nominal Vin ----Vin=Min. to Max. --Single Output Models No Load to Full Load --Dual Output Models --Single Output Models 10% to 90% Load --Dual Output Models No minimum Load Requirement --25% Load Step Change ----Continuous Typ. ------------- Max. ±1.0 ±0.2 ±1.0 ±1.0 ±0.5 ±0.8 Unit %Vnom. % % % % % 50 250 --- ----±0.02 mV P-P µsec %/℃ General Characteristics Parameter I/O Isolation Voltage (rated) I/O Isolation Resistance I/O Isolation Capacitance Conditions Min. Typ. Max. Unit 60 Seconds 1500 --- --- VDC 500 VDC 1000 --- --- MΩ 100KHz, 1V --- --- 50 pF --- 250 --- KHz 2,800,000 --- --- Hours Switching Frequency MTBF(calculated) MIL-HDBK-217F@25℃, Ground Benign Environmental Characteristics Parameter Operating Ambient Temperature Range (See Power Derating Curve) Conditions Min. Max. Unit Natural Convection -40 +85 ℃ ℃ Case Temperature --- +105 Storage Temperature -55 +125 ℃ Humidity (non condensing) --- 95 % rel. H Lead Temperature (1.5mm from case for 10Sec.) --- 260 ℃ DS_PL01S/D_07192012 E-mail: [email protected] http://www.delta.com.tw/dcdc P2 Power Derating Curve 100 80 Natural convection 60 40 20 0 ~ -40 0 20 40 60 80 100 110 Ambient Temperature C Notes 1 2 3 4 5 Specifications typical at Ta=+25℃, resistive load, nominal input voltage, rated output current unless otherwise noted. Ripple & Noise measurement bandwidth is 0-20 MHz. All DC/DC converters should be externally fused at the front end for protection. That “natural convection” is about 20LFM but is not equal to still air (0 LFM). Specifications subject to change without notice. Mechancial Drawing Mechanical Dimensions Pin Connections 3.2 [0.13] 0.5 [0.02] 11.0 [0.43] 17.0 [0.67] 0.5 [0.02] 2.15 [0.08] Pin Single Output Dual Output 1 -Vin -Vin 2 +Vin +Vin 4 +Vout +Vout 5 No Pin Common 6 -Vout -Vout 2.54 5.08 2X2.54 [0.10] [0.20] [2X0.10] 7.62 [0.30] 16.0 [0.63] Bottom View 4 0.50 [0.02] 5 6 2.5 [0.10] 2 0.25 [0.01] 1 ►All dimensions in mm (inches) ►Tolerance: X.X±0.5 (X.XX±0.02) X.XX±0.25 ( X.XXX±0.01) ►Pins ±0.05(±0.002) Physical Outline Case Size : 17.0x7.62x11.0mm (0.67x0.30x0.43 inches) Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Pin Material : Alloy 42 Weight : 12.9g DS_PL01S/D_07192012 E-mail: [email protected] http://www.delta.com.tw/dcdc P3 Part Numbering System P L 01 S 05 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D- Dual WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_PL01S/D_07192012 E-mail: [email protected] http://www.delta.com.tw/dcdc P4