PmodDIP™ Reference Manual Revision: October 1, 2012 1300 Henley Court | Pullman, WA 99163 (509) 334 6306 Voice and Fax Overview The PmodDIP is a 12-pin dual inline package (DIP) module with one 2x6-pin Digilent Pmod™ header. The PmodDIP connects to a solderless breadboard. Features include: 2x6 Pmod header Functional Description The PmodDIP adds Pmod support to a project by routing signals from the two 6-pin DIP interfaces to one 2x6-pin Pmod header. Below is a pin out table for the PmodDIP. The schematic is available for download on the PmodDIP’s product page at digilentinc.com. Interface Connector Signal Description Connector J1 – Pmod Header Pins and Corresponding DIP Pins Pmod DIP DIP Pin Header Pin header 1 J2 1 2 J2 2 3 J2 3 4 J2 4 5 J2 5 6 J2 6 7 J3 1 8 J3 2 9 J3 3 10 J3 4 11 J3 5 12 J3 6 Doc: 502-261 page 1 of 1 Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.