ESD Leaded Schottky Barrier Rectifiers SB220E-G Thru. SB2100E-G Voltage: 20 to 100 V Current: 2.0 A RoHS Device DO-15 Features -Low drop down voltage. -For use in low voltage, high frequency invertors free wheeling and polarity protection. 1.0(25.4) Min. -Silicon epitaxial planar chips. 0.142(3.6) 0.102(2.6) -ESD test under IEC6100-4-2 : Standard: >15KV(Air) & 8KV(Contact) 0.299(7.6) 0.228(5.8) Mechanical data -Epoxy: UL94V-0 rated flame retardant -Case: Molded plastic body DO-15 1.0(25.4) Min. -Terminals: Solderable per MIL-STD-750 Method 2026 0.034(0.86) 0.028(0.70) -Polarity: Color band denotes cathode end -Mounting Position: Any -Weight: 0.4grams Dimensions in inches and (millimeter) Maximum Ratings and Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SB SB SB SB SB SB SB Symbol 220E-G 240E-G 245E-G 250E-G 260E-G 280E-G 2100E-G Parameter Unit Maximum recurrent peak reverse voltage VRRM 20 40 45 50 60 80 100 V Maximum RMS voltage VRMS 14 28 30 35 42 56 70 V Maximum DC blocking voltage VDC 20 40 45 50 60 80 100 V Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=75°C, See Figure 1 I(AV) 2.0 A IFSM 50 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) TL=110°C Maximum forward voltage at 2.0A (Note 1) Maximum DC reverse current At rated DC blocking voltage TA=25°C TA=100°C Typical junction capacitance (Note 2) Typical thermal resistance (Note 3) Operating junction temperature range Storage temperature range VF 0.50 0.70 0.85 V 0.5 IR mA 20 10 CJ 170 pF RθJA RθJL 50.0 25.0 °C/W TJ -65 to +125 TSTG -65 to +150 -65 to +150 °C °C NOTES: 1. Pulse test : 300µS pulse width, 1% duty cycle. 2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts. 3. Thermal resistance from junction to ambient and from junction to lead P.C.B. mounted 0.375” (9.5mm) lead length Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 1 QW-BB058 Comchip Technology CO., LTD. ESD Leaded Schottky Barrier Rectifiers RATING AND CHARACTERISTIC CURVES (SB220E-G Thru. SB2100E-G) Fig.2 Maximum Non-repetitive Peak Forward Surge Current Fig.1 Forward Current Derating Curve 2.4 100 Peak Forward Surge Current (A) Average Forward Current (A) RESISTIVE OR INDUCTIVE LOAD 2.0 1.6 SB220E-G ~ SB260E-G 1.2 0.8 SB280E-G ~ SB2100E-G single phase half wave 60Hz resistive or inductive load 3.75”(9.5mm) lead length 0.4 10 TL=110°C 8.3mS single half sine-wave (JEDEC Method) 0 0 25 50 75 100 125 150 1 175 1 Number of Cycles at 60Hz Fig.3 Typical Instantaneous Forward Characteristics Fig.4A Typical Reverse Characteristics 100 SB220E-G ~ SB260E-G Instantaneous Reverse Current (mA) SB280E-G ~ SB2100E-G Instantaneous Forward Current (A) 100 Lead Temperature (°C) 10 SB250E-G ~ SB260E-G 1.0 SB220E-G ~ SB245E-G 0.1 0 0.4 0.6 TJ=125°C TJ=100°C 1.0 TJ=75°C 0.1 0.01 TJ=25°C 0 0.8 20 40 60 80 100 120 Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (%) Fig.5 Typical Junction Capacitance Fig.4B Typeical Reverse Characteristic 140 10000 Instantaneous Reverse Current (uA) 100 TJ=25°C f=1.0MHz 10 0.1 10 0.001 0.2 1000 Junction Capacitacne (pF) 10 1.0 10 Reverse Voltage (V) 100 SB280E-G ~ SB2100E-G 1000 TJ=150°C TJ=125°C 100 TJ=100°C 10 1.0 TJ=25°C 0.1 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage ( %) REV:A Page 2 QW-BB058 Comchip Technology CO., LTD. ESD Leaded Schottky Barrier Rectifiers Marking Code Part Number Marking Code Packaging SB220ET-G SB240ET-G SB245ET-G SB250ET-G SB260ET-G SB280ET-G SB2100ET-G SB220EA-G SB240EA-G SB245EA-G SB250EA-G SB260EA-G SB280EA-G SB2100EA-G SB220EB-G SB240EB-G SB245EB-G SB250EB-G SB260EB-G SB280EB-G SB2100EB-G SB220E SB240E SB245E SB250E SB260E SB280E SB2100E SB220E SB240E SB245E SB250E SB260E SB280E SB2100E SB220E SB240E SB245E SB250E SB260E SB280E SB2100E REEL REEL REEL REEL REEL REEL REEL AMMO AMMO AMMO AMMO AMMO AMMO AMMO BULK BULK BULK BULK BULK BULK BULK SBXXXE XXX / XXXX = Product type marking code Note: 1) Suffix code after part number to specify packaging item . Packaging REEL PACK AMMO PACK BULK PACK Code T A B Standard Packaging BULK PACK REEL PACK Case Type DO-15 REEL Reel Size ( pcs ) (inch) 4,000 13 Case Type BOX ( pcs ) DO-15 500 AMMO PACK Case Type BOX ( pcs ) DO-15 3,000 REV:A Page 3 QW-BB058 Comchip Technology CO., LTD.