General Purpose Relays Low Profile PCB Relay PCD I 1 pole 10 A I 1 NO contact I Low coil power 200 mW I Height 10.2 mm I Wash tight I RoHS compliant (Directive 2002/95/EC) as per product date code 0424 (DT) Applications Domestic appliances, coffeee machines, irons, office equipment F0154-C Approvals Z E82292 Technical data of approved types on request Contact data Contact configuration Contact set Type of interruption Rated current Rated voltage / max.switching voltage AC Limiting continuous current Maximum breaking capacity AC Contact material Mechanical endurance Rated frequency of operation with / without load 1 NO single contact micro disconnection 10 A 240/400 VAC 10 A 2500 VA AgSnO2, AgCdO >10x106 cycles 10/300 min-1 Contact ratings Type Load PCD-1...D2(H) 10 A, 250 VAC, resistive, UL PCD-1...D2(H) 5 A, 250 VAC, resistive, 70 °C, UL PCD-1...D2(H) 10 A, 277 VAC, resistive, 70°C, TÜV Cycles 6x103 6x103 10x104 Coil data Rated coil voltage range DC coil Coil power DC coil Operative range 3 ... 48 VDC 200 mW 2 Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 006 6 4.5 0.3 180+10% 200 012 12 9.0 0.6 720+10% 200 024 24 18.0 1.2 2880+10% 200 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Low Profile PCB Relay PCD (Continued) Insulation PCB layout / terminal assignment Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category Bottom view on solder pins 2500 Vrms 750 Vrms W 4/4 mm W IIIa basic functional 250 V 3 230/400 V III S0259-AA Other data RoHS - Directive 2002/95/EC compliant per as par product date code "DT" (refers to June 2004), Ambient temperature range -30 ... +70 °C Operate- / release time 8/2 ms Shock resistance (function) NO / NC contact 10 ms Shock resistance (destruction) 100 g Category of protection RT II - flux proof, RT III - wash tight Resistance to soldering heat flux-proof version 270°C / 10 s wash-tight version 260°C / 5 s Relay weight 9g Packaging unit 1000 pcs S0259-AB Dimensions S0287-A Product key P C D Type Number of contacts 1 1 NO contact Coil 5 5 VDC 12 12 VDC Coil version D standard 200 mW Contact material 1 AgCdO Contact configuration M 1 NO contact Version - flux proof Other types on request Product key PCD-105-D2M PCD-112-D2M PCD-124-D2M PCD-148-D2M PCD-105-D2MH PCD-112-D2MH PCD-124-D2MH PCD-148-D2MH 1 D M 6 6 VDC 24 24 VDC 2 AgSnO2 H wash tight Version standard 200mW flux proof Cont-material AgSnO2 Cont.configuration 1 NO contact standard 200mW wash tight Coil 5 VDC 12 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC 48 VDC Part number 0-1721105-1 0-1721105-4 0-1721105-5 0-1721105-6 0-1721105-7 1-1721105-0 1-1721105-1 1-1721105-2 2 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.