Ceramic SMD Automotive Grade Crystal Model: FXA2016B Rev. 1/29/2014 RoHS Compliant / Pb Free / REACH Compliant Page 1 of 1 http://www.foxonline.com/need_a_sample.htm FEATURES • • • • AEC-Q200 Qualified Fundamental to 50 MHz Temperatures to -40ºC ~ +125ºC Seam Seal • PART NUMBER Part Number 617B-Frequency-xxxxx 2 .1 M ax Model Number Frequency Range (MHz) FXA2016B 20.000 ~ 50.000 MHz • STANDARD SPECIFICATIONS PARAMETERS Frequency Frequency Tolerance @ 25ºC Frequency Stability, ref @ 25ºC -40 ~ +125ºC -40 ~ +85ºC Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (Co) Load Capacitance (Cl) Drive Level Aging per year Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish Seal Method 1 4 3 T op V iew 1 .7 M ax 1 MAX (unless otherwise noted) 2 20.000 ~ 50.000 MHz ±50 PPM1 0 .5 M ax ±100 PPM ±50 PPM1 (Customer Specified) -40ºC ~ +125ºC -55ºC ~ +150ºC 3pF 7pF~Series (Customer Specified) 100µW ±5 PPM 260ºC / 10 Seconds 1 Au Seam Seal 0 .7 B otto m V iew 1 4 2 3 0 .5 0 .48 0 .58 # 2 a n d # 4 co n n e ct to G N D Recommended Solder Pad Layout 0 .95 Other tolerances and stabilities available. Contact Fox Technical Support for specific requirements. Frequency Range (MHz) 20.000 ~ 23.999999 24.000 ~ 29.999999 30.000 ~ 37.999999 38.000 ~ 50.000 0 .3 Operating Mode Max ESR Ω Fundamental Fundamental Fundamental Fundamental 120 100 80 60 5570 Enterprise Parkway Fort Myers, Florida 33905 An Integrated Device Technology, Inc. company 3 1 2 0 .85 0 .5 Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. The above specifications, having been carefully prepared and checked, are believed to be accurate at the time of publication; however, no responsibility is assumed by Fox Electronics for inaccuracies. Fox Electronics 4 All dimensions are in millimeters. USA +1.239.693.0099 FOXonline.com FAX +1.239.693.1554 77