MA-COM MASW

MASW-009590-000DIE
Bumped GaAs SPDT Switch
DC - 8.0 GHz
Rev. V1
Die Bump Pad Layout (bump side up)
Features
•
•
•
•
•
•
•
802.11a + b/g and MIMO Applications
Test and Measurement and Low/Medium Power
Telecommunication Applications up to 8.0 GHz
Broadband Performance: DC - 8.0 GHz
Low Insertion Loss: 0.5 dB from 2.0 - 6.0 GHz
Ultra-Small Form Factor: 0.605 x 0.485 mm
Fast Settling for Low Gate Lag Requirements
RoHS* Compliant
Description
The MASW-009590-000DIE is a broadband bumped
GaAs pHEMT MMIC SPDT switch. Typical
applications are for WLAN IEEE 802.11a + b/g, and
MIMO. This switch is designed specifically for dual
band wireless LAN modules where size constraints
are critical. Designed for low insertion loss, this
SPDT switch maintains low loss up to 8.0 GHz.
Die Bump Pad Configuration
The MASW-009590-000DIE is fabricated using
M/A-COM Technology Solutions’ proprietary GaAs
pHEMT process, designed for ultra-fast high linearity
switching applications. The process features full
passivation for performance and reliability.
Name
Description
VC1
Voltage Control 1
RFC
RF Common
VC2
Voltage Control 2
RF2
RF Output 2
GND
Ground
RF1
RF Output 1
Ordering Information
Part Number
Package
MASW-009590-000DIE1
Separated Die on Grip Ring
MASW-009590-000D3K2
Die in 3000 piece reel
1. Die quantity varies.
2. Reference Application Note M513 for reel size information.
Absolute Maximum Ratings 3,4
Parameter
Absolute Maximum
Input Power @ 3 V Control
+32 dBm
Input Power @ 5 V Control
+33 dBm
Operating Voltage
+8.5 volts
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-009590-000DIE
Bumped GaAs SPDT Switch
DC - 8.0 GHz
Rev. V1
Electrical Specifications: TA = 25°C, Z0 = 50 Ω, VC = 0 V / 3 V, 22 pF Capacitor 5,6
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Insertion Loss 7
2.0 - 6.0 GHz
6.0 - 8.0 GHz
dB
—
—
0.50
0.55
0.80
—
Isolation
2.4 GHz
5.3 GHz
5.8 GHz
6.0 - 8.0 GHz
dB
26.5
21
20
—
27.5
22
21
18
—
—
—
—
Return Loss
DC - 8.0 GHz
dB
—
18
—
Input IP2
Two Tone, +15 dBm / Tone, 10 MHz Spacing
6.0 GHz
dBm
—
85
—
Input IP3
Two Tone, +15 dBm / Tone, 10 MHz Spacing
6.0 GHz
dBm
—
52
—
Input P0.1dB
2.4 - 5.8 GHz
dBm
—
26
—
Input P1dB
2.4 - 5.8 GHz
dBm
—
30
—
T-rise, T-fall
10% to 90% RF and 90% to 10% RF
ns
—
13
—
Ton, Toff
50% control to 90% RF and 50% control to 10% RF
ns
—
18
—
mV
—
24
—
Transients
Gate Lag
10% RF to 97.5% RF
ns
—
27
—
Control Current
|VC| = 3 V
µA
—
1
5
5. For positive voltage control, external DC blocking capacitors are required on all RF ports.
6. Electrical minimum and maximum specifications are guaranteed in final package assembly only.
7. Insertion loss can be optimized by varying the DC blocking capacitor value.
Truth Table 8
Control VC1 Control VC2
RFC– RF1
RFC—RF2
1
0
On
Off
0
1
Off
On
8. 1 = +1.8 V (for (Vhi-Vlo) < 1.8V, add a 20K Ω pull up resistor
from RFC to Vhi) to +5 V, 0 = 0 V + 0.2 V.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-009590-000DIE
Bumped GaAs SPDT Switch
DC - 8.0 GHz
Rev. V1
Typical Performance Curves (plots = chip on board assembly)
Isolation
Insertion Loss
0.0
-15
-0.2
-20
-0.4
-25
-0.6
-30
-0.8
-1.0
-35
1
2
3
4
5
6
7
8
1
2
3
Frequency (GHz)
4
5
6
7
8
Frequency (GHz)
Application Schematic
Input Return Loss
0
C1, C2, C3 = 22pF
R1, R2 = 500 Ω9
-5
-10
-15
-20
-25
-30
1
2
3
4
5
6
7
8
Frequency (GHz)
Handling Procedures
Please observe the following precautions to avoid
damage:
9. Resistors R1 and R2 are optional, acting to improve 8 GHz
Insertion Loss.
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-009590-000DIE
Bumped GaAs SPDT Switch
DC - 8.0 GHz
Die Dimensions (Top and Side Views)
Die Bump Pad Layout - Top View
(bump side up)
Rev. V1
PCB Top Metal / Solder Mask
Die Bump Pad Layout - Bottom View
(bump side down - as installed on board)
10
10. Orientation mark is only on material that is shipped in tape
and reel. The mark is not available on die shipped on grip
ring.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.