DC Current Sensor HARTMAN Aerospace Power Products Features: • 2PST N.O. Main Contacts • 45 Volt Coil Suppression • Automatic Drop-Out • Load Current Holding • 28 VDC • 75 Amps • High Reliability • Meets many requirements of MIL-R-6106 • Light Weight Construction A-848KK 2PST N.O., 75 Amps, 28 VDC CONTACTOR CONFIGURATION Dimensions for this product are expressed in inches. Multiply values by 25.4 for millimeters. PRODUCT SPECIFICATIONS Construction Main Contacts: Configuration Voltage (Nominal) Current (Resistive) Auxilary Contacts: Configuration Voltage (Nominal) Current Resistive Inductive Coil Data: Duty Cycle Voltage (Nominal) Pick-Up Voltage Drop-Out Voltage Coil Current @ 28 VDC & +25°C In-Rush Hold Operating Temperature Life: Electrical Mechanical Weight Maximum Gasket Sealed, Vented 2PST N.O. 28 VDC 75 Amps Notes: Form Z 28 Volts 5 Amps 3 Amps Continuous 28 VDC 11.5 - 15 VDC 1 - 7 VDC .312 Amp .312 Amp -55°C to +71°C 50,000 Cycles Minimum 100,000 Cycles Minimum 4 Lbs. For factory-direct application assistance, contact the HARTMAN product team at (419) 521-9500, Fax (419) 526-2749. © 2004 by Tyco Electronics Corporation. All Rights Reserved. HARTMAN and TYCO are trademarks. Catalog (web doc only) Revised 5-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967