Bulletin PD-20057 rev. B 06/06 10TQ... 10TQ...S SCHOTTKY RECTIFIER 10 Amp IF(AV) = 10Amp VR = 35 - 45V Major Ratings and Characteristics Description/ Features The 10TQ.. Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. Characteristics Values Units IF(AV) Rectangular 10 A 35 - 45 V IFSM @ tp = 5 μs sine 1050 A High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance VF @ 10 Apk, TJ = 125°C 0.49 V Low forward voltage drop High frequency operation TJ range - 55 to 175 °C Guard ring for enhanced ruggedness and long term reliability waveform VRRM 175° C TJ operation Case Styles 10TQ... 10TQ... S Base Cathode Base Cathode 2 1 Cathode TO-220 www.irf.com 1 3 Anode 3 Anode N/C D2PAK 1 10TQ... Series Bulletin PD-20057 rev. B 06/06 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 10TQ035 10TQ045 35 45 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 IFSM 10TQ Units 10 A Max. Peak One Cycle Non-Repetitive 1050 Surge Current * See Fig. 7 280 EAS Non-Repetitive Avalanche Energy 13 mJ IAR Repetitive Avalanche Current 2 A A Conditions 50% duty cycle @ TC = 151° C, rectangular wave form 5μs Sine or 3μs Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied TJ = 25 °C, IAS = 2 Amps, L = 6.5 mH Current decaying linearly to zero in 1 μsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (1) * See Fig. 1 IRM 10TQ Units Conditions 0.57 V @ 10A 0.67 V @ 20A 0.49 V @ 10A 0.61 V @ 20A TJ = 25 °C TJ = 125 °C Max. Reverse Leakage Current (1) 2 mA TJ = 25 °C * See Fig. 2 15 mA TJ = 125 °C CT Max. Junction Capacitance 900 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 8.0 nH Measured lead to lead 5mm from package body 10000 V/ μs dv/dt Max. Voltage Rate of Change VR = rated VR (Rated VR) (1) Pulse Width < 300μs, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters 10TQ Units °C Conditions TJ Max. Junction Temperature Range -55 to 175 Tstg Max. Storage Temperature Range -55 to 175 °C RthJC Max. Thermal Resistance Junction to Case 2.0 °C/W DC operation RthCS Typical Thermal Resistance, Case to 0.50 °C/W Mounting surface , smooth and greased * See Fig. 4 Heatsink wt Approximate Weight T Mounting Torque Marking Device 2 2 (0.07) g (oz.) Min. 6 (5) Max. 12 (10) Kg-cm (Ibf-in) 10TQ045 Case Style TO-220 10TQ045S Case Style D2Pak www.irf.com 10TQ... Series Bulletin PD-20057 rev. B 06/06 1000 Reverse Current - I R (mA) 1000 T =175°C J 10 150°C 125°C 1 100°C .1 75°C 50°C .01 25°C .001 .0001 0 10 15 20 25 30 35 40 45 Reverse Voltage - V R (V) 10 Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage T =175°C J T =125°C J 1000 T = 25°C J 1 .1 0 5 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 100 100 .2 .4 .6 .8 1 1.2 1.4 T =25°C J 100 0 1.6 1.8 10 20 30 40 50 Reverse Voltage - V R (V) Forward Voltage Drop - V FM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Thermal Impedance - Z thJC (°C/W) 10 1 .1 D=0.50 D=0.33 D=0.25 D=0.17 P DM D=0.08 t 1 t2 Notes: 1. Dutyfactor D= t1/ t2 .01 SinglePulse (Thermal Resistance) .001 .00001 .0001 .001 .01 2. PeakT =P xZ +T J DM thJC C .1 1 10 100 t 1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 10TQ... Series Bulletin PD-20057 rev. B 06/06 8 175 10TQ RthJC (DC) =2.0°C/W Average Power Loss (Watts) Allowable Case Temperature (°C) 180 170 DC 165 160 155 0 5 4 3 RMSLimit 1 5 10 15 Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Non-Repetitive Surge Current - I FSM (A) DC 2 0 0 15 10 D=0.08 7 D=0.17 D=0.25 6 D=0.33 D=0.50 5 Fig. 6 - Forward Power Loss Characteristics 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current L DUT IRFP460 Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit 4 www.irf.com 10TQ... Series Bulletin PD-20057 rev. B 06/06 Outline Table Conform to JEDEC outline TO-220AC Dimensions in millimeters and (inches) Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) www.irf.com 5 10TQ... Series Bulletin PD-20057 rev. B 06/06 Part Marking Information TO-220AC PART NUMBER EXAMPLE: THIS IS A 10TQ045 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO DATE CODE YEAR 1 = 2001 WEEK 19 LINE C ASSEMBLY LOT CODE D2Pak THIS IS A 10TQ045S LOT CODE 8024 ASSEMBLED ON WW 02, 2000 INTERNATIONAL RECTIFIER LOGO PART NUMBER 10TQ045S DATE CODE ASSEMBLY LOT CODE YEAR 0 = 2000 WEEK 02 LINE C Tape & Reel Information Dimensions in millimeters and (inches) 6 www.irf.com 10TQ... Series Bulletin PD-20057 rev. B 06/06 Ordering Information Table Device Code 10 T Q 045 1 2 3 4 1 - Current Rating (10 = 10A) 2 - Package 3 - Schottky "Q" Series 4 - Voltage Ratings 5 - y none = TO-220 S - 5 6 T = TO-220 yS 6 - 035 = 35V 045 = 45V = D2Pak y none = Standard Production y PbF = Lead-Free Tube Standard Pack Quantity : 50 pieces Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 06/06 www.irf.com 7