CERAMIC SMD MICRO MINIATURE MICROPROCESSOR CRYSTAL ABM7 RoHS Pb in Glass (exempt per RoHS 2002/95/EC Annex (5)) 6.0 x 3.5 x 1.4mm Compliant | | | | | | | | | | | | | FEATURES: APPLICATIONS: • Superior heat-resistant glass sealing • Low in height (1.4 mm max.) • Wide operating temperature available • Ceramic package assures high reliability • Small size SMD, suitable for high density applications • Computers, Modems, Communication equipment • Thin equipment • Industrial wide temperature applications STANDARD SPECIFICATIONS: Parameters Frequency Range Operation mode Operating Temperature Storage Temperature Frequency Tolerance @+25°C Frequency Stability over the Operating Temperature ( ref. to +25°C) Equivalent series resistance Shunt capacitance (C0) Load capacitance (CL) Drive Level Aging@25°C±3°C Insulation Resistance Minimum Typical Maximum 8.000 ----- 50.000 (*) 8.000 ----- 39.999999 40.000 ----- 80.000 40.000 ----- 50.000 -10 -40 -50 ------------- +60 +90 +50 ºC ºC ppm -50 ----- +50 ppm See options ----------------500 See table 1 below ----18 10 --------- 7 ----100 ±5 ----- Ω pF pF µW ppm MΩ --------See options (*) Frequency above 40MHz based on availability. Please contact ABRACON Units Notes Fundamental Fundamental ATcut (Standard) 3rd OT AT-cut (Standard) Fundamental ATcut (See options) See options MHz Table 1 Frequency (MHz) 8.000 – 9.999 10.000 – 15.999 16.000 – 50.000 40.000 – 80.000 See options First year @ 100Vdc ESR(Ω) max. 100 60 50 70 Operation Mode Fundamental Fundamental Fundamental 3rd Overtone OPTIONS AND PART IDENTIFICATION: (left blank if standard) ABM7- MHz - - - - - - Packaging Frequency in MHz e.g. 14.31818MHz 14.31818MHz 26.000MHz Blank: Bulk T: 1k or 2kpcs/reel T2: 250pcs/reel Load Capacitance (pF) Please specify CL in pF or S for series (8 to 33pF) Mode F: Fund AT for >40MHz Please contact ABRACON for other values Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Operating Temp. E: 0°C ~ +70°C B: -20°C ~ +70°C C: -30°C ~ +70°C N: -30°C ~ +85°C D: -40°C ~ +85°C J(***): -40°C ~ +105°C K(***): -40°C ~ +125°C L(***):-55°C to +125°C Freq. Tolerance 1: ± 10 ppm 7: ± 15 ppm 2: ± 20 ppm 3: ± 25 ppm 4: ± 30 ppm (***) ±100 ppm only Freq. Stability U: ± 10 ppm(*) G: ± 15 ppm(**) X: ± 20 ppm W: ± 25 ppm Y: ± 30 ppm H: ± 35 ppm Q: ± 100 ppm (*) -10°C to 60°C only. (**) Contact ABRACON for availability for -40°C to +85°C Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.13.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | | CERAMIC SMD MICRO MINIATURE MICROPROCESSOR CRYSTAL ABM7 6.0 x 3.5 x 1.4mm | | | | | | | | | | | | | OUTLINE DRAWING: Land pattern compatibility between ABM3 and ABM7 ABM7 ABM7 Recommended Land Pattern ABM3 ABM3Recommended Land Pattern Note: Due to the availability of raw materials, this part may be manufactured with the chamfer on pin 1. Be advised that this does not affect the electrical characteristics of the crystal in any way. TAPE & REEL: Dimensions: inch (mm) REFLOW PROFILE: T: 1000pcs/reel or 2000pcs/reel T2: 250pcs/reel Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.13.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | |