1N4001 thru 1N4007 Vishay General Semiconductor General Purpose Plastic Rectifier FEATURES • Low forward voltage drop • Low leakage current • High forward surge capability • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC DO-204AL (DO-41) TYPICAL APPLICATIONS For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes application. PRIMARY CHARACTERISTICS Note • These devices are not AEC-Q101 qualified. IF(AV) 1.0 A VRRM 50 V to 1000 V IFSM (8.3 ms sine-wave) 30 A MECHANICAL DATA IFSM (square wave tp = 1 ms) 45 A VF 1.1 V Case: DO-204AL, molded epoxy body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade IR 5.0 μA TJ max. 150 °C Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test per Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 75 °C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Non-repetitive peak forward surge current square waveform TA = 25 °C (fig. 3) tp = 1 ms tp = 2 ms 45 IFSM tp = 5 ms 35 A 30 Maximum full load reverse current, full cycle average 0.375" (9.5 mm) lead length TL = 75 °C IR(AV) 30 μA Rating for fusing (t < 8.3 ms) I2t (1) 3.7 A2s TJ, TSTG - 50 to + 150 °C Operating junction and storage temperature range Note (1) For device using on bridge rectifier appliaction Document Number: 88503 Revision: 23-Feb-11 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 1N4001 thru 1N4007 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT Maximum instantaneous forward voltage 1.0 A VF TA = 25 °C Maximum DC reverse current at rated DC blocking voltage V 5.0 IR TA = 125 °C Typical junction capacitance 1.1 4.0 V, 1 MHz μA 50 CJ 15 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT Typical thermal resistance RJA (1) 50 (1) 25 RJL °C/W Note (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, PCB mounted ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 1N4004-E3/54 0.33 54 5500 13" diameter paper tape and reel 1N4004-E3/73 0.33 73 3000 Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 30 60 Hz Resistive or Inductive Load Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.0 0.8 0.2" x 0.2" (5.0 mm x 5.0 mm) Copper Pads 0.6 0.4 0.2 0.375" (9.5 mm) Lead Length 0 TA = 55 °C 8.3 ms Single Half Sine-Wave 25 20 15 10 5 0 25 50 75 100 125 150 175 1 10 100 Junction Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88503 Revision: 23-Feb-11 1N4001 thru 1N4007 Vishay General Semiconductor 100 45 tp = 1 ms Junction Capacitance (pF) Peak Forward Surge Current (A) 50 40 35 tp = 2 ms 30 tp = 5 ms 25 tp 20 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 15 Square Waveform 10 25 50 75 100 1 0.1 125 10 100 Reverse Voltage (V) Fig. 3 - Non-Repetitive Peak Forward Surge Current Fig. 6 - Typical Junction Capacitance 100 Transient Thermal Impedance (°C/W) 100 Instantaneous Forward Current (A) 1 Ambient Temperature (°C) TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle 10 1 0.1 0.01 0.6 0.8 1.0 1.2 1.4 1.6 1.8 10 1 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 4 - Typical Instantaneous Forward Characteristics Fig. 7 - Typical Transient Thermal Impedance Instantaneous Reverse Current (μA) 1000 TJ = 150 °C 100 10 TJ = 100 °C 1 TJ = 25 °C 0.1 0.01 0 20 40 60 80 100 Percentage of Peak Reverse Voltage (%) Fig. 5 - Typical Reverse Characteristics Document Number: 88503 Revision: 23-Feb-11 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 1N4001 thru 1N4007 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-41) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. Note 0.026 (0.66) • Lead diameter is for suffix “E” part numbers 0.023 (0.58) www.vishay.com 4 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88503 Revision: 23-Feb-11 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000