OPTOWAY TRS

Optoway
TRS-9380CG
1
**********************************************************************************************************************************************************************
TRS-9380CG / TRS-9380CTG / TRS-9380CFG
3.3V / 1550 nm / 2.5 Gbps RoHS Compliant Optical Single-Mode Transceiver
*********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l
l
l
l
l
l
The TRS-9380CG series single mode transceivers is low
power, high performance module for bi-directional serial
optical data communications such as SONET OC-48 LR-2 /
SDH STM-16 (L-16.2), Gigabit Ethernet and 1X/2X Fiber
channel. This module is designed for single mode fiber and
operates at a nominal wavelength of 1550 nm. The
transmitter section uses a multiple quantum well laser
and is a class 1 laser compliant according to International
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A
LVPECL logic interface simplifies interface to external
circuitry.
l
l
l
l
l
l
l
l
Duplex SC Single Mode Transceiver: TRS-9380CG
Duplex ST Single Mode Transceiver: TRS-9380CTG
Duplex FC Single Mode Transceiver: TRS-9380CFG
SONET OC-48 LR-2/SDH STM-16 (L-16.2) Compliant
Fiber Channel 2X/1X SM-LC-L FC-PI Compliant
IEEE 802.3z Gigabit Ethernet 1000BASE-LX
Compliant
1550 nm DFB LD Transmitter
Industry Standard 1 x 9 Footprint
0 to 70oC Operating
Single +3.3 V Power Supply
RoHS Compliant
TTL Signal Detect Output
Wave Solderable and Aqueous Washable
Class 1 Laser International Safety Standard IEC 60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
l High Performance Desktops
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
SONET
/SDH
TRS-9380CG
2488
LR-2/L-16.2
Distance Wavelength Voltage
(km)
(nm)
(V)
80
1550 DFB
3.3
Package
Temp.
(oC)
1X9 SC/ST/FC
0 to 70
TX
Power
(dBm)
3 to -2
RX Sens.
RoHS
(dBm) Compliant
-28
Y
Note: TRS-XXXXXFG for FC duplex transceiver, TRS-XXXXXTG for ST duplex transceiver, TRS-XXXXX-EMG for SC duplex
transceiver with extended EMI shielding,
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
--Vcc
--Iout
Min
-40
0
0
GND
Max
85
70
260
4.5
Vcc
Units
o
C
o
C
o
C
V
V
0
30
mA
Min
3.13
0
622
Typ
3.3
Max
3.47
70
2670
300
Notes
10 seconds on leads only
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Data Rate
Power Supply Current
Symbol
Vcc
Topr
Icc
2488
200
Units
V
o
C
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2006 V1.0
Optoway
TRS-9380CG
2
***********************************************************************************************************************************************************************
Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V)
Parameter
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Extinction Ratio
Output Eye
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
Symbol
Min
Typ
Max
Units
Notes
Po
-2
1480
λ
--∆λ
SMSR
30
ER
8.2
Compliant with IEEE 802.3z
tr
tf
RIN
--1550
---
3
1580
1
1
---
---
dBm
nm
nm
dB
dB
150
150
-120
ps
ps
dB/Hz
350
1600
-1.58
-0.74
µA
µA
mV
V
V
IIL
IIH
V IH - V IL
VIL - V CC
VIH - V CC
-350
300
-2.0
-1.1
-20 dB width
20% to 80% Values
20% to 80% Values
2
2
Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber.
2. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs.
Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3.47V)
Parameter
Optical
Sensitivity
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Data Output Voltage – Low
Data Output Voltage – High
Signal Detect Output Voltage -- Low
Signal Detect Output Voltage -- High
Symbol
Min
Typ
Max
Units
Notes
--Pin
Pa
Pd
---9
---40
1.0
1260
---
-28
---28
---
dBm
dBm
dBm
dBm
dB
nm
1
VOL - VCC
VOH - VCC
VSDL
VSDH
-2.0
-1.1
---------
1600
-1.58
-0.74
0.5
2.0
V
V
V
V
Transition: low to high
Transition: high to low
2
2
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS.
2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2006 V1.0
Optoway
TRS-9380CG
3
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
Receiver Signal Ground 1 (Rx GND)
Receiver Data Out 2 (RD+)
Receiver Data Out Bar 3 (RD−)
Signal Detect 4 (SD)
Receiver Power Supply 5 (Rx Vcc)
Transmitter Power Supply 6 (Tx Vcc)
Transmitter Data In Bar 7 (TD−)
Transmitter Data In 8 (TD+)
Transmitter Signal Ground 9 (Tx GND)
PIN
1
2
3
4
5
6
7
8
9
Symbol
Rx GND
RD+
RD−
SD
Rx Vcc
Tx Vcc
TD−
TD+
Tx GND
N/C
TOP VIEW
N/C
Notes
Directly connect this pin to the receiver ground plane
See recommended circuit schematic
See recommended circuit schematic
Active high on this indicates a received optical signal
+3.3V dc power for the receiver section
+3.3V dc power for the transmitter section
See recommended circuit schematic
See recommended circuit schematic
Directly connect this plan to the trransmitter ground plane
RECOMMENDED CIRCUIT SCHEMATIC
Transceiver
TX GND
0.1uF
LD
Driver
9
TD+
8
TD-
7
Z=50R
100R
0.1uF
Z=50R
TX VCC
RX VCC
POST
Amp
PECL
1uH
6
10nF
10uF
10nF
10uF
4
RD-
3
RD+
2
R2
1uH
5
SD
R1
VCC
SD (TTL)
Z=50R
100R
PECL
Z=50R
R3
RX GND
R4
1
For Vcc=3.3V, R1=R2=R3=R4= 180R
The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The
power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx
Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2006 V1.0
Optoway
TRS-9380CG
4
***********************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
1) SC Type With Extended Shielding
TX OPTICAL
RX OPTICAL
TRS-9380C-EMG
2) SC Type With Flat Extended Shielding
TX OPTICAL
RX OPTICAL
TRS-9380C-EM1G
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2006 V1.0
Optoway
TRS-9380CG
5
***********************************************************************************************************************************************************************
3) ST Type
TX OPTICAL
RX OPTICAL
TRS-9380CTG
4) FC Type
12.7
TX OPTICAL
RX OPTICAL
2.54*8
20.32
O1.3
20.32
13.7
10
10.18
0.75
5.97
13.9
25.4
34.5MAX
TRS-9380CFG
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2006 V1.0