Optoway TRS-9002CG 1 ********************************************************************************************************************************************************************** TRS-9002CG / TRS-9002CTG / TRS-9002CFG 5V / 1310 nm / 2.5 Gbps RoHS Compliant Optical Single-Mode Transceiver ********************************************************************************************************************************************************************* FEATURES DESCRIPTION l l l l l l The TRS-9002CG series single mode transceivers is low power, high performance module for bi-directional serial optical data communications such as SONET OC-48 SR / SDH STM-16 (I-16), Gigabit Ethernet and 1X/2X Fiber channel. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A LVPECL logic interface simplifies interface to external circuitry. l l l l l l l l Duplex SC Single Mode Transceiver: TRS-9002CG Duplex ST Single Mode Transceiver: TRS-9002CTG Duplex FC Single Mode Transceiver: TRS-9002CFG SONET OC-48 SR / SDH STM-16 (I-16) Compliant Fiber Channel 2X/1X SM-LC-L FC-PI Compliant IEEE 802.3z Gigabit Ethernet 1000BASE-LX Compliant Industry Standard 1 x 9 Footprint 0 to 70oC Operating : TRS-9002CG -40 to 85oC Operating : TRS-9002CAG Single +5 V Power Supply RoHS Compliant TTL Signal Detect Output Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC 60825 Compliant LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l Switch to Switch Interface l High Speed Interface for File Servers l High Performance Desktops ORDER INFORMATION P/No. Bit Rate (Mb/s) SONET /SDH TRS-9002CG TRS-9002CAG 2488 2488 SR/I-16 SR/I-16 Distance Wavelength Voltage (km) (nm) (V) 2 2 1310 1310 5 5 Package Temp. (oC) TX RX Sens. RoHS Power (dBm) Compliant (dBm) 1X9 SC/ST/FC 0 to 70 -3 to -9.5 -18 Y 1X9 SC/ST/FC -40 to 85 -3 to -9.5 -18 Y Note: TRS-XXXXXFG for FC duplex transceiver, TRS-XXXXXTG for ST duplex transceiver, TRS-XXXXX-EMG for SC duplex transceiver with extended EMI shielding, Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Symbol Tstg Topr Soldering Temperature Power Supply Voltage Input Voltage --Vcc --- Output Current Iout Min -40 0 -40 Units o C o C 0 GND Max 85 70 85 260 6 Vcc 0 30 mA Min 4.75 0 -40 622 Typ 5 Max 5.25 70 85 2670 240 o C V V Notes TRS-9002CG TRS-9002CAG 10 seconds on leads only Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Symbol Vcc Topr Data Rate Power Supply Current Icc 2488 180 Units V o C / TRS-9002CG o C / TRS-9002CAG Mb/s mA *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2006 V1.0 Optoway TRS-9002CG 2 *********************************************************************************************************************************************************************** Transmitter Specifications (0 oC < Topr < 70 oC, 4.75V < Vcc < 5.25V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Symbol Min Typ Max Units Notes Po -9.5 1270 λ --∆λ ER 8.2 Compliant with IEEE 802.3z tr tf RIN --1310 ----- -3 1360 3 --- dBm nm nm dB 1 150 150 -120 ps ps dB/Hz 350 1600 -1.58 -0.74 µA µA mV V V IIL IIH V IH - V IL VIL - V CC VIH - V CC -350 300 -2.0 -1.1 RMS (σ) 20% to 80% Values 20% to 80% Values 2 2 Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. Receiver Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Data Output Voltage – Low Data Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol Min Typ Max Units Notes --Pin Pa Pd ---3 ---30 1.0 1260 --- -18 ---18 --- dBm dBm dBm dBm dB nm 1 VOL - VCC VOH - VCC VSDL VSDH -2.0 -1.1 --------- 1600 -1.58 -0.74 0.5 2.0 V V V V Transition: low to high Transition: high to low 2 2 Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS. 2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2006 V1.0 Optoway TRS-9002CG 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM Receiver Signal Ground 1 (Rx GND) Receiver Data Out 2 (RD+) Receiver Data Out Bar 3 (RD−) Signal Detect 4 (SD) Receiver Power Supply 5 (Rx Vcc) Transmitter Power Supply 6 (Tx Vcc) Transmitter Data In Bar 7 (TD−) Transmitter Data In 8 (TD+) Transmitter Signal Ground 9 (Tx GND) PIN 1 2 3 4 5 6 7 8 9 Symbol Rx GND RD+ RD− SD Rx Vcc Tx Vcc TD− TD+ Tx GND N/C TOP VIEW N/C Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal +5V dc power for the receiver section +5V dc power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this plan to the trransmitter ground plane RECOMMENDED CIRCUIT SCHEMATIC Transceiver TX GND 0.1uF LD Driver 9 TD+ 8 TD- 7 Z=50R 100R 0.1uF Z=50R TX VCC RX VCC POST Amp PECL 1uH 6 10nF 10uF 10nF 10uF 4 RD- 3 RD+ 2 R2 1uH 5 SD R1 VCC SD (TTL) Z=50R 100R PECL Z=50R R3 RX GND R4 1 For Vcc=5V, R1=R2=R3=R4= 330R The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2006 V1.0 Optoway TRS-9002CG 4 *********************************************************************************************************************************************************************** PACKAGE DIAGRAM Units in mm 1) SC Type With Extended Shielding TX OPTICAL RX OPTICAL TRS-9002C-EMG / TRS-9002AC-EMG 2) SC Type With Flat Extended Shielding TX OPTICAL RX OPTICAL TRS-9002C-EM1G / TRS-9002AC-EM1G *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2006 V1.0 Optoway TRS-9002CG 5 *********************************************************************************************************************************************************************** 3) ST Type TX OPTICAL RX OPTICAL TRS-9002CTG / TRS-9002ACTG 4) FC Type 12.7 TX OPTICAL RX OPTICAL 2.54*8 20.32 O1.3 20.32 13.7 10 10.18 0.75 5.97 13.9 25.4 34.5MAX TRS-9002CFG / TRS-9002ACFG Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2006 V1.0