BE905A2 Mobile Data Terminal Features TI 1GHz 32-bit ARM Cortex-A8 Single Core CPU 512MB LPDDR eMMC 4.41 I/F 8GB Android 2.3 OS Support SD/SDHC Card 7" TFT LCD with 800x480 Resolution 4-wired Resistive Touch Panel 1xRS232C, 1xCAN BUS ADC, GPIO, USB 2.0 Device, USB 2.0 Host Built-in Light Sensor On Board 3G/GPS Module (optional) 6xUser Defined Programmable Key Pad DC 11V~30V Power Requirement Built-in Battery Charger Circuit With Car Mount Internal 2W Speaker H Hardware ard d dware are Specifications Spe ecifica eci atio ations Processor TI 1GHz Single Core CPU (32-bit ARM Cortex-A8) USB 1xUSB 2.0 Host, 1xUSB 2.0 Device OS Android 2.3 External I/O Support ADC (2xChannel, 10-bits Resolution) Support GPIO (2xGP Input, 2xGP Output) Support RS232C (5-Wired UART) Support CAN BUS (2.0b with ISO 11898-1) System Memory LPDDR-400 512MB Internal Storage eMMC 4.41 I/F 8GB External Storage Support SD/SDHC Card Slot Up to 32GB Display 7" TFT LCD 800x480 WVGA With LED Backlight Backlight Auto-adjustment by Light Sensor 4-wired Resistive Touch Panel Key Pads 7xUser Defined Programmable HotKey 1xPower Key Audio Internal 2 Watt Speaker (Mono) Internal Microphone External 3.5mm Mono Headset Jack (Mic/Earphone) Power Supply DC 11V~30V Internal Li-Polymer Battery of 2500 mAh Telecom (optional) Hexa-Band UMTS(800/850/900/1700/1900/2100 MHz) HSPA: HSUPA 5.6 Mbps, HSDPA 7.2 Mbps Operation Temperature Quad-band GSM (850/900/1800/1900 MHz) -20 ~ 70 GPRS Class 33, CS1-CS4 107 Kps EDGE Class 33, MCS1-MCS9 296 Kbps GPS (optional) 50-channel Receiver Engine Certification RoHS, Reach, WEEE, CE, FCC, E-MARK, UL Chassis Industrial grade, IP54 (MDT+Power Cord) Dimension 190mm(W)x140mm(H)x35mm(D) Weight 795g (w/ battery) 695g (w/o battery) DEC. 2014 VER:03