Model 5016 Signal Conditioning System 64 Channels Description Frequency Devices Model 5016 signal conditioning system consists of a open frame rackmount chassis that houses the power supply, signal input/output via terminal-block connection and mounting space for up to 16, 5016-4FF plug-in quad cards. Channel cards can be populated with any of the D68, D70, or D74 Series filters allowing the user to tailor the system performance and cost to meet specific application requirements. Each channel provides differential input, buffered output, fixed gain up to +60 dB and can be configured with fixed frequency filtering from 1 Hz to 100 kHz. The output buffer amplifier has high output current and capacitive load capability to handle load of coaxial cable or twisted shielded pairs. LOW-PASS FILTER OPTIONS D68L8B & D70L8B 8-pole Butterworth D68L8E 8-pole, 6-zero elliptic 1.77 (-80dB) D68L8EX 8-pole, 6-zero elliptic 1.56 (-80dB) D68L8EY 8-pole, 6-zero elliptic 2.00 (-100dB) D68L8L & D70L8L 8-pole Bessel D68L8D 8-pole, constant delay (-80dB) D68L8D10 8-pole, constant delay (-100dB) D70L6B 6-pole Butterworth D70L6L 6-pole Bessel D74L4B, D70L4B & D64L4B 4-pole Butterworth D74L4L, D70L4L & D64L4L 4-pole Bessel D64L4Y2 4-pole Chebychev (0.2 dB Ripple) D64L4Y5 4-pole Chebychev (0.5 dB Ripple) HIGH-PASS FILTER OPTIONS D68H8B & D70H8B 8-pole Butterworth D68H8E 8-pole, 6-zero elliptic 1.77 (-80dB) D68H8EX 8-pole, 6-zero elliptic 1.56 (-80dB) D68H8EY 8-pole, 6-zero elliptic 2.00 (-100dB) D74H4B, D70H4B & D64H4B 4-pole Butterworth D70H6B 6-pole Butterworth D64H4Y2 4-pole Chebychev (0.2 dB Ripple) D64H4Y5 4-pole Chebychev (0.5 dB Ripple) BAND-PASS/BAND-REJECT FILTER OPTIONS D68BP 4-pole pair band-pass D68BR 4-pole pair band-reject Features/Benefits: • Simultaneous access over 64 channels offers a low cost, versatile and convenient way to provide signal conditioning solutions. • Compact 5.25” H x 19.0” W x 8.0” D minimizes rack space requirements. • Broad range of filter types, transfer characteristics and corner frequencies are available to meet a wide range of applications. • Filters provide low harmonic distortion and wide signal-to-noise ratio from 12 to 16-bit resolution. Applications • • • • • • • Anti-alias filtering Sonar, navigation and aerospace Engine test and simulation Acoustic, vibration analysis & control Industrial process control Laboratory R & D Audio communications 51 25 Locust St. • Haverhill, Massachusetts 01830 • (800) 252-7074 • (978) 374-0761 • FAX (978) 521-1839 e-mail: [email protected] • Web Address: http://www.freqdev.com • Fax on Demand: 978/521-5178 Model 5016 Specifications (@ 25°C and rated power Input) General 1. Pre Filter Gain 2. Available Filters 3. Filter Frequency (fc) 4. Phase Match 5. Harmonic Distortion @ 1 kHz 6. Amplitude Accuracy 7. Wide Band Noise 8. Narrow Band Noise 9. Signal I/O Ordering Information 0 to +60 dB 4-, 6- or 8-pole Butterworth Bessel Elliptic constant delay Chebychev 1.00 Hz to 100 kHz See filter specifications See filter specifications To configure a system that offers up to 64 channels of signal conditioning you must specify the following items. 5016/01 Open Frame Chassis Houses power supply, provides terminal block signal I/O and mounting space for up to 16, 5016-4FF channel cards 5016PS-1.5A Power Supply See filter specifications See filter specifications See filter specifications Terminal Blocks on rear of main frame 100, 110, 220, 240 VAC 10. Power Connector @ 50/60 Hz 11. Power 100 watts 12. Operating Temperature 0°C to 50°C 13. Dimensions 5.25”H x 19.0”W x 8.0”D 13.34 cm H x 48.26 cm W x 20.32 cm D 14. Weight 25 lbs., 11.3 kg Input Characteristics 15. Input Impedance: Differential Single Ended 16. Coupling 17. Maximum Input Signal 18. Input Voltage: Linear Differential Max Safe Differential Power module inserts from the front of the rack and provides 1.5 Amps of ±15 Vdc power. 5016-4FF Quad Filter/Amplifier Card Each card contains up to four customer specified filter modules. Customer must specify filter type, corner frequency and pre filter gain for each card. Example: 2 MW to Analog Ground 1 MW to Analog Ground DC ±10Vpk @ 0 dB Corner Frequency 5016-4FF/D68BP4E10-849 Hz/0 dB ±10V pk (gain set @ 0 dB) Any continuous value between ±40V Max Safe Common Mode Any continuous value between ±40V 19. Common Mode Rejection Ratio with less than 2 k W source unbalance and 0 dB gain 60 dB typ. @ 1 kHz Output Characteristics 20. Output Impedance 21. Offset Voltage 22. Offset Temp. Coeff. 23. Current 24. Maximum Voltage (open circuit) 25. Cross-Talk between Channels Filter Type Prefilter Gain 0 to +60 dB 5016BC Blank Slot Cover Blank slot cover covers unused slots in 5016/01 chassis. 0W ±2mV 50mV/°C ±50 mA into 50 W ±10Vpk -90 dB max. 0 to 100 kHz 26. Rack Mount Assembly Included We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements, recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements, recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright. PR-5016-00 52 25 Locust St. • Haverhill, Massachusetts 01830 • (800) 252-7074 • (978) 374-0761 • FAX (978) 521-1839 e-mail: [email protected] • Web Address: http://www.freqdev.com • Fax on Demand: 978/521-5178