MCS0630 Series – SMD MOLDED HIGH CURRENT POWER INDUCTORS (SHIELDED) Rev. A A. Electrical Specifications: P/N MCS0630-R22MN2 MCS0630-R33MN2 MCS0630-R47MN2 MCS0630-R56MN2 MCS0630-R68MN2 MCS0630-R82MN2 MCS0630-1R0MN2 MCS0630-1R5MN2 MCS0630-2R2MN2 MCS0630-3R3MN2 MCS0630-4R7MN2 MCS0630-6R8MN2 MCS0630-8R2MN2 MCS0630-100MN1 L (uH) 0.22 0.33 0.47 0.56 0.68 0.82 1.00 1.50 2.20 3.30 4.70 6.80 8.20 10.00 Tol. Mark M M M M M M M M M M M M M M R22 R33 R47 R56 R68 R82 1R0 1R5 2R2 3R3 4R7 6R8 8R2 100 Test Freq. (KHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 DCR Typ. (mΩ) 2.50 3.50 4.00 4.70 5.00 6.70 9.00 14.0 17.0 28.0 37.0 54.0 54.0 62.0 DCR Max. I sat. Typ. I rated Typ. (A) (A) (mΩ) 2.80 40.0 23.0 3.90 30.0 20.0 4.20 26.5 17.5 5.00 25.5 16.5 5.50 25.0 15.5 8.00 20.0 13.0 10.0 20.0 11.0 15.0 16.0 9.00 20.0 12.0 8.00 30.0 10.0 6.00 40.0 7.00 5.50 60.0 6.50 4.50 60.0 6.50 4.50 68.0 5.50 4.00 B. Dimensions: mm (Inch) Series MCS0630 Tol. a b c d e f g h 6.6 (0.260) ±0.2 (0.008) 7.3 (0.287) 3 (0.118) 1.85 (0.073) 3.5 (0.138) Max. 1.5 (0.059) ±.5 (0.020) 3.7 (0.146) Max 3 (0.118) ±0.3 (0.012) Typ. Typ. Typ. Foot Print C. General Information: 1. 2. 3. 4. 5. 6. 7. 8. 9. MCS0630-xxxMN2, “MCS0630” = P/N, “xxx” = Inductance, “_” = Tolerance: M: ± 20%, “N2” = Internal control code Tolerance “_”: M: ± 20% Magnetically shielded High saturation current Operating temperature: -55°C to +125ºC All test data is referenced to 25ºC ambient. Rated current (A) that will cause an approximate ∆T of 40ºC. I sat (A) that will cause Lo to drop approximately 20%. The part temperature (ambient + self temp. rise) should not exceed 125ºC under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature which should be verified in the end applications. 10. Test Instrument: Chroma16502, Chroma11300. 11. Inductance and Current Range: From 0.22 uH (23.0 A) to 10 uH (4.0 A) 12. Unspecified values available on request. 13. MSL: Level 1 Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 MCS0630 Series – SMD MOLDED HIGH CURRENT POWER INDUCTORS (SHIELDED) Rev. A D. Applications: 1. 2. 3. 4. 5. 6. Game Consoles Set Top Boxes Cables Modems Computers Mobile Communication Devices (Cell Phones, Radios, etc.) PDA, LCD, DVD, BRP, HD. E. Characteristics Curve: Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989