HS-1760

HS-1760
Intel® Core™ 2 Duo/Mobile Celeron® processor
Mini ITX Board
•1066/800MHz FSB•DDR3•CompactFlash•
•PCIe x1•PCIe x16•Mini PCI•PCI•
•GPIO•DVI-I/CRT/LVDS•Dual GB LAN•
•HD Audio• 4 SATA•RS-232/422/485•4 COM•
•6 USB2.0•WDT•H/W Monitor•
Copyright Disclaimers
The accuracy of contents in this manual has passed thorough checking and review before
publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for
any infringements of patents or other rights resulting from its use. The manufacturer will
not be responsible for any direct, indirect, special, incidental or consequential
damages arising from the use of this product or documentation, even if advised of
the possibility of such damage(s).
This manual is copyrighted and BOSER Technology Co., Ltd. reserves all
documentation rights. Unauthorized reproduction, transmission, translation, and
storage of any form and means (i.e., electronic, mechanical, photocopying, recording)
of this document, in whole or partly, is prohibited, unless granted permission by BOSER
Technology Co., Ltd.
BOSER Technology Co., Ltd. reserves the right to change or improve the contents of
this document without due notice. BOSER Technology Co., Ltd. assumes no
responsibility for any errors or omissions that may appear in this manual, nor does
it make any commitment to update the information contained herein.
TTrraaddeem
maarrkkss
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
AMI is a registered trademark of AMI Software, Inc.
All other trademarks, products and or product names mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 2010 BOSER Technology Co., Ltd.
All Rights Reserved.
Edition 1.2, February 24, 2011
Table of Contents
Chapter 1
General Description..................................1
1.1 Major Features ....................................................................... 2
1.2 Specifications ........................................................................ 2
1.3 Board Dimensions ................................................................. 4
Chapter 2
Unpacking .................................................5
2.1 Opening the Delivery Package ............................................. 5
2.2 Inspection............................................................................... 5
Chapter 3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
3.14
3.15
3.16
3.17
3.18
3.19
3.20
Hardware Installation ..............................7
Before Installation ................................................................. 7
Board Layout ......................................................................... 8
Jumper List ............................................................................ 9
Connector List ..................................................................... 10
Configuring the CPU ........................................................... 11
System Memory ................................................................... 11
VGA Controller..................................................................... 11
Serial ATA Connector ......................................................... 13
Serial Port Connectors ....................................................... 14
Ethernet Connector ............................................................. 15
USB Port ............................................................................... 16
CMOS Data Clear ................................................................. 16
Parallel Port.......................................................................... 17
Power and Fan Connectors ................................................ 18
Keyboard/Mouse Connectors ............................................ 19
System Front Panel Control ............................................... 19
Watchdog Timer .................................................................. 20
Audio Connectors ............................................................... 22
CompactFlash Connector ................................................ 22
8-bit GPIO Function ............................................................. 24
Chapter 4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
Chapter 5
5.1
5.2
5.3
5.4
AMI BIOS Setup .................................... 25
Starting Setup ...................................................................... 25
Using Setup ......................................................................... 26
Main Menu ............................................................................ 27
Advanced Settings .............................................................. 28
Advanced PCI/PnP Settings ............................................... 32
Boot Settings ....................................................................... 33
Security Settings ................................................................. 34
Advanced Chipset Settings ................................................ 35
Exit Options ......................................................................... 36
Software Utilities .................................... 37
Chipset Driver Installation .................................................. 37
VGA Driver Installation ....................................................... 40
LAN Driver Installation ........................................................ 43
Audio Driver Installation ..................................................... 45
Appendix A Riser Card Application .......................... 47
Declaration of Conformity -- CE Mark
BOSER Technology hereby acknowledges that compliance testing in
accordance with applicable standards of the EU’s EMC Directive,
89/336/EEC, was successfully completed on a sample of the equipment
identified below:
Equipment Class:
Product Model Series:
This Product Complies With:
Information Technology Equipment
HS-1760
EN55022:
Class A for Radiated emissions
EN50082-2:
Heavy Industrial EMC Immunity
We, the undersigned, hereby declare that the equipment specified above
conforms to the above directives and standards.
Manufacturer:
BOSER TECHNOLOGY CO., LTD.
Safety Instructions
Integrated circuits on computer boards are sensitive to static electricity. To
avoid damaging chips from electrostatic discharge, observe the following
precautions:
„ Do not remove boards or integrated circuits from their anti-static packaging
„
„
„
until you are ready to install them.
Before handling a board or integrated circuit, touch an unpainted portion of
the system unit chassis for a few seconds. This helps to discharge any static
electricity on your body.
Wear a wrist-grounding strap, available from most electronic component
stores, when handling boards and components. Fasten the ALLIGATOR clip
of the strap to the end of the shielded wire lead from a grounded object.
Please wear and connect the strap before handle the HS-1760 to ensure
harmlessly discharge any static electricity through the strap.
Please use an anti-static pad when putting down any components or parts or
tools outside the computer. You may also use an anti-static bag instead of
the pad. Please inquire from your local supplier for additional assistance in
finding the necessary anti-static gadgets.
NOTE:
DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTIONS.
Chapter 1
General Description
The HS-1760 is an Intel® GM45/ICH9-M chipset-based board
designed, the board supports Intel® Mobile Dual-Core processor. The
HS-1760 is an ideal all-in-one mini ITX board. Additional features
include an enhanced I/O with CF, DVI-I/CRT/LVDS, dual GB LAN, HD
audio, 4 SATA, 4 COM, and 6 USB2.0 interfaces.
The Intel® GM45 integrated Intel® Gen5.0 GMA 4500MHD Graphics
shared system memory up to 352MB with DVMT5.0 supports
CRT/Panel displays up to 2048 x 1536. It also supports 24-bit
single/dual channel LVDS interface.
System memory is also sufficient with the two 204-pin SO-DIMM
sockets DDR3 800/1066MHz up to 4GB.
1
Additional onboard connectors include six advanced USB2.0 ports
providing faster data transmission. And two RJ-45 connectors for
10/100/1000 Based Ethernet uses. To ensure the reliability in an
unmanned or standalone system, the watchdog timer (WDT) onboard
HS-1760 is designed with software that does not need the arithmetical
functions of a real-time clock chip. If any program causes unexpected
halts to the system, the onboard WDT will automatically reset the CPU
or generate an interrupt to resolve such condition.
1.1
Major Features
The HS-1760 comes with the following features:
„ Socket P for Intel® Core™ 2 Duo/Mobile Celeron® processor, supports
„
„
„
„
„
„
„
1.2
1066/800/667MHz FSB
2 x SO-DIMMs up to 4GB DDR3 SDRAM
Intel® GM45/ICH9-M system chipset
Intel® GM45 integrated VGA for DVI-I, CRT & LVDS
2 x 10/100/1000 Mbps Ethernet
High Definition audio codec
Supports CF, 4 x SATA, 4 x COM, 6 x USB2.0, mini PCI slot, PCIe x1
slot, PCIe x16 slot, standard PCI slot
Supports 24-bit LVDS, 8-bit GPIO, H/W Monitor function
Specifications
System
„ CPU:
„
„
„
„
„
„
2
Intel® Core™ 2 Duo and Mobile Celeron® processor
FSB:
1066/800/667MHz FSB
BIOS:
AMI PnP Flash BIOS
System Chipset:
Intel® GM45/ICH9-M
I/O Chipset:
Winbond W83627UHG
System Memory:
2 x 204-pin SO-DIMM sockets DDR3 800/1066MHz up to 4GB
Storage:
1 x Type II CF socket
„
„
„
„
„
„
„
Watchdog Timer:
Software programmable time-out intervals from 1~255 sec. or 1~255
min.
H/W Status Monitor:
Monitoring temperatures, voltages, and cooling fan status
Expansion Interface:
1 x PCIe x1 slot
1 x PCIe x16 slot
1 x Type III mini PCI slot
1 x Standard PCI slot
Power Function:
ATX power
Operating Temperature:
0~60 degrees C
Operating Humidity:
0~95%, non-condensing
Size (L x W):
170 x 170 mm
I/O Interface
„ MIO:
„
3 x RS-232 (2 x external)
1 x RS-232/422/485
6 x USB2.0 (2 x internal, 4 x external)
1 x Parallel
4 x SATA
1 x PS/2 for KB/MS
GPIO:
8-bit general purpose input/output port
Display
„ Chipset:
„
„
„
„
Intel® GM45 integrated Intel® GMA 4500 MHD
Display Memory:
352MB video memory
LVDS:
24-bit single/dual-channel
Resolution:
2048 x 1536
DVI chipset:
Intel® GM45 integrated Intel® GMA 4500 MHD
Audio
„ Chipset:
„
RealTek ALC262 High Definition audio codec
Audio Interface:
MIC In, Line Out
3
Ethernet
„ Chipset:
„
1.3
4
Dual RealTek RTL8111C 10/100/1000 Mbps LAN
Ethernet Interface:
2 x RJ-45
Board Dimensions
Chapter 2
Unpacking
2.1
Opening the Delivery Package
The HS-1760 is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Safety Instructions in front of this manual describe anti-static
precautions and procedures.
2.2
Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Examine all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
to ensure that they are firmly seated. The HS-1760 delivery package
contains the following items:
„
„
„
„
HS-1760 Board x 1
Utility CD Disk x 1, including User’s Manual
Cables (as following table)
Jumper Bag x 1
5
Cables Package
Description
NO.
1
2
3
SATA cable 50cm (w/Lock)
Print DB25-26P(2.0) cable
SATA power cable 15cm
QTY.
1
1
1
It is recommended that you keep all the parts of the delivery package
intact and store them in a safe/dry place for any unforeseen event
requiring the return shipment of the product. In case you discover any
missing and/or damaged items from the list of items, please contact
your dealer immediately.
Option Accessories
NO.
Description
1
2
3
4
6
USB 1-to-2 cable
SATA cable 50cm (w/Lock)
COM DB9*2-10P(2.0) cable
H=23mm CPU Cooler
Chapter 3
Hardware Installation
This chapter provides the information on how to install the hardware
using the HS-1760. This chapter also contains information related to
jumper settings of switch, and watchdog timer selection etc.
3.1
Before Installation
After confirming your package contents, you are now ready to install
your hardware. The following are important reminders and steps to
take before you begin with your installation process.
1.
Make sure that all jumper settings match their default settings
and CMOS setup correctly. Refer to the sections on this chapter
for the default settings of each jumper. (JP8 short 1-2)
2.
Go through the connections of all external devices and make
sure that they are installed properly and configured correctly
within the CMOS setup. Refer to the sections on this chapter
for the detailed information on the connectors.
3.
Keep the driver CD in good condition for future reference and
use.
7
3.2
Board Layout
TOP Side
8
Solder Side
3.3
Jumper
JP3
JP8
JP9
JP11
JP12
JP13
JP14
JP15
JP16
JP18
JP19
CN21
Jumper List
Default Setting
Panel Voltage Select: +3.3V
Clear CMOS: Normal Operation
FSB Frequency Select: CPU Driven
CF or SATA 3 Connector Select: SATA
Onboard Display or External PCIe x16 Bus
Select: CRT Function
COM 2 Use RS-232 or RS-422/485 Select:
RS-232
Setting Page
Short 2-3
Short 1-2
Short 2-3
Short 1-2
Short 1-2
Short 2-3
Short 2-3
Short 2-3
Short 2-3
Open
Short 1-2
Open
11
16
11
13/22
11
14
9
3.4
Connector List
Connector
ATX1
CN2
Definition
Page
24-pin ATX Power Connector
18
PS/2 6-pin Mini DIN KB & MS
19
Connector
CN3/CN5
LVDS Panel Connector
11
CN4
System Front Panel Connector
19
CN6
15-pin CRT/DVI-I Connector
11
CN7
COM 1/COM 2 Connector (DB9)
14
CN8/CN11/CN13/CN15 SATA 0~SATA 3 Connector
13
CN9/CN12
RJ-45 + External USB2.0 Ports
15/16
CN14
MIC In/Line Out Connector
22
CN16
Internal USB2.0 Ports
16
CN18/CN19
COM 3/COM 4 Connector (5x2 header)
14
CN22
8-bit GPIO
24
CN23
RS-422/485 Connector (3x2 header)
14
CN24
Parallel Port
17
CN25
CompactFlash Connector
22
CN26
External Reset Button
18
CON1
PCIe x1 Expansion Slot
---DIMM1/DIMM2
DDR3 Socket
11
FN1/FN2
Fan Power Connector
18
JP6
Inverter Power Connector
11
PCI1
Mini PCI Expansion Slot
---PCI2
PCI Expansion Slot
---PCIE_1
PCIe x16 Expansion Slot
----
10
3.5
Configuring the CPU
The HS-1760 use Socket P for Intel® Core™ 2 Duo (Penryn 45nm)
and Mobile Celeron® processor.
z
JP9/JP11/JP12: FSB Frequency Select
Options
CPU Driven (default)
1066MHz FSB
800MHz FSB
667MHz FSB
JP9
Settings
JP11
JP12
Short 2-3
Short 2-3
Short 2-3
Short 2-3
Short 1-2
Short 2-3
Open
Open
Short 1-2
Open
Open
Short 2-3
1
3.6
3
1
3
1
3
System Memory
The HS-1760 provides two 204-pin SO-DIMM sockets at locations
DIMM1/DIMM2. It supports DDR3 800/1066MHz up to 4GB.
3.7
VGA Controller
The HS-1760 provides three types of connection for display device.
CN6A is a 15-pin CRT connector. CN3/CN5 are the LVDS interface
connectors onboard reserved for flat panel installation. HS-1760 also
provides DVI-I connector at location CN6B.
z
CN6A: 15-pin CRT Connector
PIN Description PIN Description
1
3
5
7
9
11
13
15
Red
Blue
GND
GND
VCC
N/C
HSYNC
DDCCL
2
4
6
8
10
12
14
Green
N/C
GND
GND
GND
DDCDA
VSYNC
14 9 3 12 7
5
1
15 10 4 13 8 2 11 6
11
z
CN3/CN5: LVDS Interface Connector
PIN Description PIN Description
1
3
5
7
9
11
13
NOTE:
z
VLCD
GND
A0-/B0A1-/B1A2-/B2CLK1-/CLK2A3-/B3-
2
4
6
8
10
12
14
VLCD
GND
A0+/B0+
A1+/B1+
A2+/B2+
CLK1+/CLK2+
A3+/B3+
2
14
1
13
LVDS cable should be produced very carefully. A0- & A0+ have to
be fabricated in twister pair (A1- & A1+, A2- & A2+ and so on)
otherwise the signal won’t be stable. Please set the proper voltage
of your panel using JP6 before proceeding on installing it.
JP6: Inverter Power Connector
NOTE:
PIN
Description
1
2
3
4
5
6
+12V
+12V
VCC
BK_EN
LCD_EN
GND
1
6
If use CN3 only, it just supports 24-bit single channel LVDS panel;
If you want to use 48-bit dual channel LVDS panel, please use CN3
and CN5 combined.
The HS-1760 has an onboard jumper that selects the working voltage
of the flat panel connected to the system. Jumper JP3 offers two
voltage settings for the user.
z
z
JP3: Panel Voltage Select
Options
Settings
+3.3V (default)
+5V
Short 2-3
Short 1-2
3
JP18/JP19: External PCIe x16 Slot Enabled/Disabled Select
Options
Enabled
Disabled (default)
Settings
JP18
JP19
Short
Open
1
12
1
3
Short 2-3
Short 1-2
1 2
z
CN6B: DVI-I Connector
PIN Description PIN Description
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
3.8
- DATA2
GND
DATA4
DDCDATA
-DATA1
GND
DATA3
GND
-DATA0
GND
DATA5
CLK
RED
BLUE
GND
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
DATA2
-DATA4
DDCCLK
VSYNC
DATA1
-DATA3
VCC5
HPDET
DATA0
-DATA5
GND
-CLK
GREEN
HSYNC
GND
Serial ATA Connector
You can connect the Serial ATA device that provides you high speeds
transfer rates (300MB/sec.).
z
CN8/CN11/CN13/CN15: SATA 0~SATA 3 Connector
PIN
Description
1
2
3
4
5
6
7
GND
SATATXP
SATATXN
GND
SATARXN
SATARXP
GND
1
7
13
z
JP13/JP14/JP15/JP16: CF or SATA 3 Connector Select
Options
Settings
JP14
JP15
JP13
SATA 3 (default)
CF
3.9
JP16
Short 2-3
Short 1-2
1
1
1
1
3
3
3
3
Serial Port Connectors
The HS-1760 offers 16C550 compatible UARTs with Send/
Receive 16-byte FIFO serial ports.
z
CN7: COM 1/COM 2 Connector (DB9)
PIN Description PIN Description
1
3
5
7
9
z
DCD
RXD
TXD
DTR
GND
2
4
6
8
DSR
RTS
CTS
RI
5
1
9
6
CN18/CN19: COM 3/COM 4 Connector (5x2 Header)
PIN Description PIN Description
1
3
5
7
9
z
DCD
RXD
TXD
DTR
GND
2
4
6
8
10
DSR
RTS
CTS
RI
Don’t Use
2
10
1
9
CN23: RS-422/485 Connector (3x2 Header, COM 2)
PIN Description PIN Description
1
3
5
NOTE:
14
TXRX+
GND
2
4
6
TX+
RXN/C
2
6
1
5
The terminal resistance of RX & TX is set at 180Ω.
z
CN21: COM 2 use RS-232 or RS-422/485 Select
Options
Settings
RS-232 (default)
RS-485 Transmit Only (*1)
RS-485 by –RTS (*-1)
RS-422/485 Full Duplex (*2)
Open
Short 1-2, 3-4, 5-7, 8-10
Short 1-2, 3-4, 7-9, 8-10
Short 1-2, 3-4, 6-8
NOTE:
2
10
1
9
*1: 2-wires RS-485 function
*2: 4-wires point-to-point full duplex function
4-wires point-to-point full duplex RS-422/485
Typical RS-485 2-wires Mutildrop Network
3.10 Ethernet Connector
The HS-1760 provides two RJ-45 connectors for 10/100/1000 Based
LAN. Please refer to the following for its pin information.
When installs OS, this driver namely can automatically install. User
does not need to renewal.
z
CN9/CN12: RJ-45 Connector
PIN Description PIN Description
1
3
5
7
9
11
13
15
N/C
MDIN0
MDIN1
MDIN2
MDIN3
LINK UP
LINK 100
GND
2
4
6
8
10
12
14
16
MDIP0
MDIP1
MDIP2
MDIP3
N/C
220Ω pull 3.3V
LINK 1000
GND
10
1
15
3.11 USB Port
The HS-1760 provides one 8-pin connectors, at location CN16, for two
USB2.0 ports, and CN9/CN12 are external USB2.0 ports, there are
total six USB2.0 ports in HS-1760.
z
CN9/CN12: External USB2.0 Port
PIN
Description
PIN
Description
1
3
5
7
VCC
USBD0-/USB2USBD0+/USB2+
GND
2
4
6
8
VCC
USBD1-/USB3USBD1+/USB3+
GND
z CN16: Internal USB2.0 Ports
PIN
Description
PIN
Description
1
3
5
7
VCC
USBD4USBD4+
GND
2
4
6
8
VCC
USBD5USBD5+
GND
2
8
1
7
3.12 CMOS Data Clear
The HS-1760 has a Clear CMOS jumper on JP8.
z
JP8: Clear CMOS
Options
Settings
Normal Operation (default)
Clear CMOS
Short 1-2
Short 2-3
1
3
IMPORTANT: Before turn on the power of system, please set JP8 to
open for normal operation.
16
3.13 Parallel Port
CN24 is a standard 26-pin flat cable connector designed to
accommodate parallel port connection onboard the HS-1760.
z
CN24: Parallel Port
PIN
Description
PIN
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
Strobe
DATA 0
DATA 1
DATA 2
DATA 3
DATA 4
DATA 5
DATA 6
DATA 7
Acknowledge
Busy
Paper Empty
Printer Select
14
15
16
17
18
19
20
21
22
23
24
25
26
Auto From Feed
ERROR#
Initialize
Printer Select LN#
GND
GND
GND
GND
GND
GND
GND
GND
GND
14
26
1
13
17
3.14 Power and Fan Connectors
z
ATX1: 24-pin ATX Power Connector
PIN
1
2
3
4
5
6
7
8
9
10
11
12
z
z
18
Description PIN Description
N/C
N/C
GND
+5V
GND
+5V
GND
Power OK
5VSB
+12V
+12V
N/C
13
14
15
16
17
18
19
20
21
22
23
24
Description
1
2
3
GND
+12V
Fan In
3
CN26: External ATX Power Connector
PIN
Description
1
2
ATX Power Button
GND
1
24
12
N/C
N/C
GND
PS_ON
GND
GND
GND
-5V
+5V
+5V
+5V
GND
FN1/FN2: Fan Power Connector
PIN
13
1
3.15 Keyboard/Mouse Connectors
The CN2 is a PS/2 6-pin Mini DIN connector for HS-1760.
z
CN2: PS/2 6-pin Mini DIN Keyboard & Mouse Connector
PIN
Description
PIN
Description
1
3
5
7
9
11
13
15
Keyboard Data
GND
Keyboard Clock
Mouse Data
GND
Mouse Clock
GND
GND
2
4
6
8
10
12
14
16
N/C
+5V
N/C
N/C
+5V
N/C
GND
GND
3.16 System Front Panel Control
The HS-1760 has front panel control at location CN4.
z
CN4: System Front Panel Control
PIN
Description
PIN
Description
1
3
5
7
9
11
470Ω pull VCC
HDD LED
ATX Power Button
GND
Reset Switch
GND
2
4
6
8
10
12
Speaker
N/C
GND
33Ω pull VCC
470Ω pull 5V
GND
Connector CN4 Orientation
HDD LED
ATX Power
Button
Reset
Button
1
2
3
4
5
6
7
8
9
10
11
12
Speaker
ATX
Power
LED
19
3.17 Watchdog Timer
Once the Enable cycle is active a Refresh cycle is requested before the
time-out period. This restarts counting of the WDT period. When the
time counting goes over the period preset of WDT, it will assume that
the program operation is abnormal. A reset system signal will restart
when such error happens.
The HS-1760 custom WDT circuit is implemented using the internal IO
of the Winbond Super I/O W83627UHG which is at 2Eh of LPC.
The following sample programs show how to enable, disable and
refresh the watchdog timer:
Sample Code
C Language for Watchdog Timer under DOS.
#include<stdio.h>
#include<dos.h>
static unsigned int 83627UHG_Port = 0x2e;
{
Outportb(83627UHG_Port,0x87);
Outportb(83627UHG_Port,0x87);
}
void W83627UHG_WDT(unsigned int count_setup)
{
unsigned int Counting, Register_Setup;
outportb(83627UHG_Port, 0x07);
outportb(83627UHG_Port+1, 8); // set as Logical
Device 8
if(count_value >= 60)
{
outportb(83627UHG_Port, 0xf5);
Register_Setup = inportb(83627UHG_Port+1);
Register_Setup |= 0x08;
outportb(83627UHG_Port+1, Register_Setup); /
/ set as minute mode
counting = count_setup / 60;
if((count_value%60) > 30)
20
counting++;
if(counting > 255)
counting = 255;
printf("WDT timeout in %d minutes.\n",
counting);
}
else
{
outportb(83627UHG_Port, 0xf5);
Register_Setup = inportb(83627UHG_Port+1);
Register_Setup &= 0xf7;
outportb(83627UHG_Port+1, Register_Setup); /
/ set as second mode
Counting = count_setup;
printf("WDT timeout in %d seconds.\n",
counting);
}
If(counting)
{
outportb(83627UHG_Port, 0x30);
Register_Setup = inportb(83627UHG_Port+1);
Register_Setup |= 0x01;
outportb(83627UHG_Port+1, Register_Setup);// set WDTO#
active
outportb(83627UHG_Port, 0x07);
outportb(83627UHG_Port+1, 8); // set as Logical
Device 8
outportb(83627UHG_Port, 0xf6);
outportb(83627UHG_Port+1, counting); // set WDT
count value
};
21
3.18 Audio Connectors
The HS-1760 has an onboard RealTek ALC262 HD audio controller.
CN14(Green) is Line Out, CN14(PINK) is MIC In.
3.19 CompactFlash Connector
The HS-1760 also offers a Type I/II CompactFlash connector is IDE
interface located at the solder side of the board. The designated CN25
connector, once soldered with an adapter, can hold CompactFlash
cards of various sizes. Please turn off the power before inserting the
CF card.
Inserting a CompactFlash card into the adapter is not a difficult task.
The socket and card are both keyed and there is only one direction for
the card to be completely inserted. Refer to the diagram on the
following page for the traditional way of inserting the card.
z
JP13/JP14/JP15/JP16: CF or SATA 3 Connector Select
Options
JP13
Settings
JP14
JP15
SATA 3 (default)
CF
22
JP16
Short 2-3
Short 1-2
1
1
1
1
3
3
3
3
z
CN25: CompactFlash Connector
PIN
Description
PIN
Description
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
GND
DATA4
DATA6
SDCS1#
GND
GND
VCC
GND
GND
SDA1
DATA0
DATA2
N/C
DATA11
DATA13
DATA15
N/C
IOW
IRQ
CS
RESET
DACK
IDE LED
DATA8
DATA10
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
DATA3
DATA5
DATA7
GND
GND
GND
GND
GND
SDA2
SDA0
DATA1
470Ω pull GND
N/C
DATA12
DATA14
SDCS3#
UOR
EWE0
VCC
N/C
IORDY
REQ
PDIAG
DATA9
GND
NOTE: When use CF card, SATA3 device function will be disabled.
23
3.20 8-bit GPIO Function
The HS-1760 offers one 8-bit input/output port.
z
CN22: 8-bit GPIO
PIN Description PIN Description
1
3
5
7
9
VCC
GD0
GD1
GD2
GD3
2
4
6
8
10
GND
GD4
GD5
GD6
GD7
2
10
1
9
EX. Sample Code Using GPIO 5
#include <conio.h>
#include <stdio.h>
#include <io.h>
void main(void)
{
unsigned char byte_cr29;
outportb(0x2e, 0x87); // enter Super I/O configuration mode
outportb(0x2e, 0x87);
outportb(0x2e,0x29); // set CR29 bit 5
byte_cr29 = (inportb(0x2f) | 0x20); // to switch UARTA to GPIO5
outportb(0x2f, byte_cr29);
outportb(0x2e, 0x07); // locate logical device 8
outportb(0x2e, 0x08);
outportb(0x2e, 0x30); // set CR30 bit 1 (enable GPIO5)
outportb(0x2f, 0x02);
outportb(0x2e, 0xe0); // set GP54 ~ GP57
outportb(0x2f, 0x0F); // GP54 ~ GP57 as output pins
}
24
Chapter 4
AMI BIOS Setup
The HS-1760 uses AMI BIOS for the system configuration. The AMI
BIOS setup program is designed to provide the maximum flexibility in
configuring the system by offering various options that could be
selected for end-user requirements. This chapter is written to assist
you in the proper usage of these features.
4.1
Starting Setup
The AMI BIOS is immediately activated when you first power on the
computer. The BIOS reads the system information contained in the
CMOS and begins the process of checking out the system and
configuring it. When it finishes, the BIOS will seek an operating system
on one of the disks and then launch and turn control over to the
operating system.
While the BIOS is in control, the Setup program can be activated in one
of two ways:
1. By pressing <Del> immediately after switching the system on, or
2. By pressing the <F1> key when the following message appears
briefly at the bottom of the screen during the POST (Power On Self
Test).
Press F1 to Run SETUP.
25
4.2
Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to
select, and press <Esc> to quit. The following table provides more
detail about how to navigate in the Setup program using the keyboard.
↑
↓
←
→
Esc key
PgUp key
PgDn key
+ key
- key
F1 key
F2 key
F3 key
F4 key
F5 key
F6 key
F7 key
F8 key
F9 key
F10 key
26
Move to previous item
Move to next item
Move to previous item
Move to previous item
Main Menu -- Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu -Exit current page and return to Main Menu
Move to top item
Move to bottom item
Increase the numeric value or make changes
Decrease the numeric value or make changes
General Help
Change background color forward
Change background color backward
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Save all the CMOS changes
4.3
Main Menu
Once you enter the AMI BIOS CMOS Setup Utility, the Main Menu will
appear on the screen. The Main Menu allows you to select from several
setup functions and two exit choices. Use the arrow keys to select
among the items and press <Enter> to enter the sub-menu.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
System Overview
AMIBIOS
Version
: 08.00.15
Build Date : 06/09/10
ID
: A1760001
Processor
Intel(R) Core(TM) 2 Duo CPU
Speed
: 2266MHz
Count
: 1
Boot
Security
Exit
P8400 @ 2.2GHz
System Memory
Size
: 893MB
System Time
System Date
Chipset
Select Screen
Select Item
[00:29:32]
[Mon 07/12/2010]
ª - Change Field
Tab Select Field
F1
General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
NOTE:
A brief description of the highlighted choice appears at the bottom
of the screen.
27
4.4
Advanced Settings
This section allows you to configure your system for the basic
operation. You have the opportunity to select the system’s default
speed, boot-up sequence, keyboard operation, shadowing and
security.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Advanced Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Exit
CPU Configuration
IDE Configuration
SuperIO Configuration
Hardware Health Configuration
ACPI Configuration
APM Configuration
USB Configuration
AHCI Configuration
Select Screen
Select Item
ª - Change Field
Tab Select Field
F1
General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Configure advanced CPU settings
Manufacturer
: Intel
Intel(R) Core(TM) 2 Duo CPU P8400 @ 2.26GHz
Frequency
: 2.26GHz
FSB Speed
: 1066MHz
Cache L1
: 64 KB
Cache L2
: 3072 KB
Ratio Actual Value : 8.5
Chipset
Exit
Select Screen
Select Item
Max CPUID Value Limit
[Disabled]
ª - Change Field
Intel(R) Virtualization Tech
[Enabled]
Tab
Select Field
Execute-Disabled Bit Capability
[Enabled]
F1
General Help
F10
Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
28
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
IDE Configuration
Configure SATA#1 as
[IDE]
SATA PORT0
: [Not Detected]
SATA PORT1
: [Not Detected]
SATA PORT2
: [Not Detected]
SATA PORT3
: [Not Detected]
Chipset
Exit
Select Screen
Select Item
ª - Change Field
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security Chipset
Exit
Configure WIN627UHG Super IO Chipset
Serial Port1 Address
[3F8]
Serial Port2 Address
[2F8]
Serial Port2 Mode
[Normal]
Serial Port3 Address
[3E8]
Serial Port4 Address
[2E8]
Parallel Port Address
[378]
Select Item
Parallel Port Mode
[Normal]
ª - Change Field
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Hardware Health Configuration
CPU Temperature
System Temperature
Boot
SYSFAN Speed
CPUFAN Speed
:
:
:
:
:
:
:
Security
Chipset
Exit
:
:
Select Screen
Select Item
Vcore
ª - Change Field
12V
Tab
Select Field
3.3V
F1
General Help
1.8V
F10
Save and Exit
ESC
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
29
BIOS SETUP UTILITY
Main
Advanced
ACPI Settings
Suspend mode
PCIPnP
Boot
Security
Chipset
Exit
[Auto]
Select Screen
Select Item
ª - Change Field
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
APM Configuration
Power Management/APM
Power Button Mode
Restore on AC Power Loss
Boot
Security
Video Power Down Mode
Hard Disk Power Down Mode
Standby Time Out
Suspend Time Out
Throttle Slow clock Ratio
System Thermal
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[50%]
[Disabled]
Chipset
Exit
[Enabled]
[On/Off]
[Last State]
Select Screen
Select Item
ª - Change Field
Resume On PME#
[Disabled]
Tab
Select Field
Resume On RTC Alarm
[Disabled]
F1
General Help
F10
Save and Exit
ESC
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Advanced
USB Configuration
Legacy USB Support
USB 2.0 Controller Mode
PCIPnP
Boot
Security
Chipset
[Enabled]
[HiSpeed]
ª Tab
F1
F10
ESC
Select Screen
Select Item
Change Field
Select Field
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
30
Exit
BIOS SETUP UTILITY
Main
Advanced
AHCI Settings
AHCI BIOS Support
AHCI Port0
AHCI Port1
AHCI Port2
AHCI Port3
PCIPnP
Boot
[Enabled]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Security
Chipset
ª Tab
F1
F10
ESC
Exit
Select Screen
Select Item
Change Field
Select Field
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
31
4.5
Advanced PCI/PnP Settings
This section describes configuring the PCI bus system. PCI, or
Personal Computer Interconnect, is a system that allows I/O devices to
operate at speeds nearing the speed the CPU itself uses when
communicating with its own special components. This section covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Advanced PCI/PnP Settings
Boot
Security
Chipset
Exit
WARNING:
Setting wrong values in below
sections may cause system to
malfunction.
Clean NVRAM
[No]
Plug & Play O/S
[Yes]
HDA Controller
[Enabled]
Onboard Lan1 Controller
[Enabled]
Onboard Lan2 Controller
[Enabled]
Onboard Lan Boot ROM
[Disabled]
Watch Dog Timer Select
[Disabled]
Restore on AC Power Loss
[Last State]
Select Screen
Select Item
ª Change Field
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
32
4.6
Boot Settings
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot Settings
Boot Settings Configuration
Boot
Security
Chipset
Exit
Select Screen
Select Item
ª - Change Field
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security Chipset
Exit
Boot Settings Configuration
Quick Boot
[Enabled]
Quiet Boot
[Disabled]
Select Screen
AddOn ROM Display Mode
[Force BIOS]
Select Item
Bootup Num-Lock
[On]
ª - Change Field
PS/2 Mouse Support
[Auto]
Tab
Select Field
Wait For ‘F1’ If Error
[Enabled]
F1
General Help
Hit ‘DEL’ Message Display
[Enabled]
F10
Save and Exit
Interrupt 19 Capture
[Disabled]
ESC
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
33
4.7
Security Settings
BIOS SETUP UTILITY
Main
Advanced
Security Settings
Supervisor Password
User Password
PCIPnP
Boot
Security
Chipset
Exit
: Not Installed
: Not Installed
Select Screen
Select Item
ª Change Field
[Disabled]
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Change Supervisor Password
Change User Password
Boot Sector Virus Protection
34
4.8
Advanced Chipset Settings
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Advanced Chipset Settings
Boot
Security
Chipset
Exit
WARNING: Setting wrong values in below
sections may cause system to
malfunction.
North Bridge Configuration
South Bridge Configuration
Select Screen
Select Item
ª Change Field
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
North Bridge Chipset Configuration
Boots Graphic Adapter Priority [PEG/PCI]
Internal Graphics Mode Select [Enabled, 128MB]
PAVP Mode
[Lite]
PEG Port Configuration
Select Screen
PEG Port
[Auto]
Select Item
ª Change Field
DVMT Mode Select
[DVMT Mode]
Tab
Select Field
DVMT/FIXED Memory
[256MB]
F1
General Help
Boot Display Device
[VBIOS-Default]
F10
Save and Exit
Flat Panel Type
[800 x 600 18-bit]
ESC
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Flat Panel Type
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
640 x 480
800 x 600
1024 x 768
1280 x 1024
1400 x 1050
1600 x 1200
18-bit Single Channel
18-bit Single Channel
24-bit Single Channel
24-bit Dual Channel
24-bit Dual Channel
24-bit Dual Channel
35
BIOS SETUP UTILITY
Main
Advanced
PCIPnP Boot
Sorth Bridge Chipset Configuration
PCIE Ports Configuration
PCIE Port 0
PCIE Port 1
PCIE Port 2
PCIE Port 3
PCIE Port 4
PCIE Port 5
Security
Chipset
Exit
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
Select Screen
Select Item
ª - Change Field
Tab Select Field
F1
General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
4.9
Exit Options
BIOS SETUP UTILITY
Main
Advanced
Exit Options
PCIPnP
Boot
Security
Chipset
Exit
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Load Failsafe Defaults
Select Screen
Select Item
ª - Change Field
Tab Select Field
F1
General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
36
Chapter 5
Software Utilities
This chapter contains the detailed information about installation
procedures of chipset, VGA, LAN, audio and other drivers. The utility
CD disk that comes with the package contains an auto-run program
that invokes the installation programs for the chipset, VGA, LAN and
audio drivers. The following sections describe the installation
procedures of each driver based on WinXP operating systems. Other
operation system may be slightly different.
5.1
1.
Chipset Driver Installation
Insert the CD that comes with the board into the CD-ROM drive.
Click CHIPSET to install chipset driver.
37
2.
Immediately after clicking the CHIPSET button in Step 1, the
program launches the Setup that will assist you in the
installation process. Click on the Next > button to proceed.
3.
The License Agreement dialog box then appears on the screen.
Choose Yes to proceed.
38
4.
When the Readme File Information dialog box pops up, just
clock on the Next> button to proceed.
5.
Click on the Finish to completed the installation.
39
5.2
VGA Driver Installation
1.
Insert the CD that comes with the board into the CD-ROM drive.
Click VGA to install Intel® GM45 video driver.
2.
The Welcome to the Setup program dialog box appears on the
screen. Choose Next> to proceed.
40
3.
The Intel® License Agreement dialog box appears on the screen.
Choose Yes to proceed.
4.
When the Readme File Information dialog box pops up, just click
on the Next> button to proceed.
41
5.
The Installshield Wizard dialog box appears on the screen. Click
on Next> to proceed.
6.
When Setup Progress finished, just click on Next button to
proceed.
42
7.
Please select “Yes, I want to restart my computer now”
button then click “Finish” to reboot your system to take the
effect once the installation is completed.
5.3
1.
LAN Driver Installation
Insert the CD that comes with the board into the CD-ROM drive.
Click LAN to install RTL8111 LAN driver.
43
2.
When the dialog box below appears, make sure you close all
other Windows applications the click on the Next> button to
proceed.
3.
The Setup Status dialog box then appears on the screen.
44
4.
When setup is finished, please reboot your computer to take the
effect.
5.4
1.
Audio Driver Installation
Insert the CD that comes with the board into the CD-ROM drive.
Click Audio to install audio driver.
45
2.
When the dialog box below appears, Click on Yes to proceed.
3.
Please select “Yes, I want to restart my computer now”
button then click “Finish” to reboot your system to take the
effect once the installation is completed.
46
Appendix A
Riser Card Application
BOSER released PCI Riser Card A-1103 (option) to expend PCI
interface card for HS-1760. A-1103 has two PCI slots and individual AD
for user to select.
z
JP1/JP2: PCI1/PCI2 AD Select
Options
AD28
AD31
Settings
JP1
JP2
Short 19-20
----
---Short 25-26
47
This page is the blank page.
48