B3L30LP 3A SCHOTTKY BARRIER RECTIFIER Features Mechanical Data • Guard Ring Die Construction for Transient Protection • • Low Power Loss, High Efficiency • • Low Forward Voltage Drop • Case: U-DFN3030-8 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 For Use in Low Voltage, High Frequency Inverters, Free • Wheeling, and Polarity Protection Applications • Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - NiPdAu over Copper lead frame. • High Forward Surge Current Capability • Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) • Polarity: See Diagram • Halogen and Antimony Free. “Green” Device (Note 3) • Weight: 0.0172 grams (approximate) Solderable per MIL-STD-202, Method 208 e4 U-DFN3030-8 Bottom View Top View Schematic and Pin Configuration Ordering Information (Note 4) Part Number B3L30LP-7 Notes: Case U-DFN3030-8 Packaging 3000/Tape & Reel 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information S33 = Product marking code YYWW = Date code marking YY = Last digit of year (ex: 13 for 2013) WW = Week code (01 ~ 53) B3L30LP Document number: DS30915 Rev. 11 - 2 1 of 5 www.diodes.com March 2014 © Diodes Incorporated B3L30LP Maximum Ratings (@TA = +25°C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Symbol Value Unit VRRM VRWM VR 30 V VR(RMS) 21 V IO 3.0 A IFSM 30 A Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load Thermal Characteristics Characteristic Thermal Resistance Junction to Soldering Point Symbol Typ Max Unit RθJS ⎯ 3 °C/W Thermal Resistance Junction to Ambient Air (Note 5) RθJA 130 ⎯ °C/W Power Dissipation (Note 6) (Note 7) (Note 8) PD ⎯ ⎯ ⎯ 2.5 4.0 4.5 W Operating and Storage Temperature Range °C -65 to +150 TJ, TSTG Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Reverse Breakdown Voltage (Note 9) Forward Voltage Reverse Current (Note 9) Notes: Symbol Min Typ Max Unit V(BR)R 30 ⎯ ⎯ V ⎯ 0.28 ⎯ IF = 0.5A, TJ = +25°C ⎯ 0.30 0.35 IF = 1.0A, TJ = +25°C ⎯ 0.18 0.29 ⎯ 0.33 0.40 ⎯ 0.22 0.37 ⎯ 0.35 0.45 IF = 3.0A, TJ = +25°C ⎯ 0.26 0.42 IF = 3.0A, TJ = +125°C ⎯ 0.27 1.0 mA TJ = +25°C, VR = 30V ⎯ 55 90 mA TJ = +100°C, VR = 30V VF IR Test Condition IR = 5.0mA IF = 1.0A, TJ = +125°C V IF = 2.0A, TJ = +25°C IF = 2.0A, TJ = +125°C 5. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com. TA = +25°C. 6. Device mounted on FR-4 PCB, 25mm2 pad area. 7. Device mounted on FR-4 PCB, 75mm2 pad area. 8. Aluminum PCB with copper mounting pad area of 75mm2. 9. Short duration pulse test used to minimize self-heating effect. B3L30LP Document number: DS30915 Rev. 11 - 2 2 of 5 www.diodes.com March 2014 © Diodes Incorporated 100 10 T A = 150°C T A = 125°C 1 T A = 100°C TA = 85°C 0.1 TA = 25°C TA = 0°C 0.01 TA = -55°C 0.001 1 0.6 0.8 0.2 0.4 0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics 100 T A = 100°C 10 TA = 85°C 1 0.1 TA = 25°C T A = 0°C 0.01 TA = -55°C 0.001 0.0001 0 10 20 30 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics 165 TA, DERATED AMBIENT TEMPERATURE (°C) 800 f = 1.0 MHz CT, TOTAL CAPACITANCE (pF) IR, INSTANTANEOUS REVERSE CURRENT (mA) IF, INSTANTANEOUS FORWARD CURRENT (A) B3L30LP 600 400 200 0 0 5 15 10 20 25 30 VR, DC REVERSE VOLTAGE (V) Fig. 3 Total Capacitance vs. Reverse Voltage B3L30LP Document number: DS30915 Rev. 11 - 2 3 of 5 www.diodes.com 150 135 120 105 90 75 60 45 30 15 0 10 20 VR, DC REVERSE VOLTAGE (V) Fig. 4 Operating Temperature Derating 30 March 2014 © Diodes Incorporated B3L30LP Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. 3 A 1 A A e n a l P g n i t a e S U-DFN3030-8 Dim Min Max Typ A 0.57 0.63 0.60 A1 0 0.05 0.02 A3 0.15 b 0.29 0.39 0.34 D 2.90 3.10 3.00 D2 2.19 2.39 2.29 e 0.65 E 2.90 3.10 3.00 E2 1.64 1.84 1.74 L 0.30 0.60 0.45 All Dimensions in mm 2 DD 2 E E L 0 0 2 . 0 R D I 1 # n i P b ︶ e ︵ Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. Z X1 X2 G Y B3L30LP Document number: DS30915 Rev. 11 - 2 Dimensions Value (in mm) Z 2.59 G 0.11 X1 2.49 X2 0.65 Y 0.39 C 0.65 C 4 of 5 www.diodes.com March 2014 © Diodes Incorporated B3L30LP IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2014, Diodes Incorporated www.diodes.com B3L30LP Document number: DS30915 Rev. 11 - 2 5 of 5 www.diodes.com March 2014 © Diodes Incorporated