SBR4040CT SBR4040CTFP 40A SBR® SUPER BARRIER RECTIFIER Features • • • • • • Mechanical Data • • Low Forward Voltage Drop Excellent High Temperature Stability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Also Available in Green Molding Compound • Halogen and Antimony Free. “Green” Device (Note 3) TO-220AB Top View TO-220AB Bottom View Case: TO-220AB, ITO-220AB Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Terminals: Matte Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: TO-220AB – 1.85 grams (approximate) ITO-220AB – 1.65 grams (approximate) • • ITO-220AB Top View ITO-220AB Bottom View Package Pin Out Configuration Ordering Information (Notes 4 and 5) Part Number SBR4040CT Pb Green Pb Green Pb Notes: Case TO-220AB Packaging 50 pieces/tube SBR4040CT-G TO-220AB 50 pieces/tube SBR4040CTFP ITO-220AB 50 pieces/tube SBR4040CTFP-G ITO-220AB 50 pieces/tube SBR4040CTFP-JT ITO-220AB((Alternate) 50 pieces/tube 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For Green Molding Compound version part numbers, add "-G" suffix to part number above. Examples: SBR4040CT-G. 5. For packaging details, go to our website at http://www.diodes.com. Marking Information SBR4040CT SBR4040CT = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year (ex: 06 = 2006) WW = Week (01 - 53) YYWW AB YYWW AB SBR is a registered trademark of Diodes Incorporated. SBR4040 Document number: DS30986 Rev. 5 - 2 SBR4040CTFP SBR4040CTFP = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year (ex: 06 = 2006) WW = Week (01 - 53) 1 of 5 www.diodes.com May 2012 © Diodes Incorporated SBR4040CT SBR4040CTFP Maximum Ratings (Per Leg) @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current Per Device (Per Leg) (Total) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Peak Repetitive Reverse Surge Current (2μS - 1Khz) Isolation Voltage (ITO-220AB Only) From terminal to heatsink t = 3 sec. Symbol VRRM VRWM VRM Value Unit 40 V IO 20 40 A IFSM 280 A IRRM 2 A VAC 2000 V Symbol Value Unit RθJC 2 4 -65 to +150 ºC/W Thermal Characteristics (Per Leg) Characteristic Typical Thermal Resistance Package = TO-220AB Package = ITO-220AB Operating and Storage Temperature Range TJ, TSTG ºC Electrical Characteristics (Per Leg) @TA = 25°C unless otherwise specified Characteristic Symbol Min Forward Voltage Drop VF - Leakage Current (Note 6) IR - Notes: Typ 0.44 Max 0.53 0.48 - 0.5 100 Unit V mA Test Condition IF = 20A, TJ = 25ºC IF = 20A, TJ = 125ºC VR = 40V, TJ = 25ºC VR = 40V, TJ = 125ºC 6. Short duration pulse test used to minimize self-heating effect. 7. Using heatsink (by Black Aluminum 37mm * 50mm * 15mm) IF, INSTANTANEOUS FORWARD CURRENT (A) 12 PD, POWER DISSIPATION (W) 10 T A = 150°C 8 6 4 2 0 0 5 10 15 20 25 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation SBR is a registered trademark of Diodes Incorporated. SBR4040 Document number: DS30986 Rev. 5 - 2 2 of 5 www.diodes.com 100 10 1 0.1 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics May 2012 © Diodes Incorporated 100,000 25 IF(AV), AVERAGE FORWARD CURRENT (A) IR, INSTANTANEOUS REVERSE CURRENT (µA) SBR4040CT SBR4040CTFP 10,000 1,000 100 10 1 20 15 10 5 0 0 10 20 30 40 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 0 25 50 75 100 125 TA, AMBIENT TEMPERATURE (°C) Fig. 4 Forward Current Derating Curve 150 TA,DERATED AMBIENT TEMPERATURE (°C) 175 150 125 100 75 50 25 0 0 5 10 15 20 25 30 35 40 VR, DC REVERSE VOLTAGE (V) Fig. 5 Operating Temperature Derating 45 SBR is a registered trademark of Diodes Incorporated. SBR4040 Document number: DS30986 Rev. 5 - 2 3 of 5 www.diodes.com May 2012 © Diodes Incorporated SBR4040CT SBR4040CTFP Package Outline Dimensions A E A1 Q SEATING PLANE P 16.00 ± 0.20* H1 D D1 L1 L b2 e e1 b c A2 *Guaranteed by TO-220AB leadframe design TO-220AB Dim Min Typ Max A 3.56 4.82 A1 0.51 1.39 A2 2.04 2.92 b 0.39 0.81 1.01 b2 1.15 1.24 1.77 c 0.356 0.61 D 14.22 16.51 D1 8.39 9.01 e 2.54 e1 5.08 E 9.66 10.66 H1 5.85 6.85 L 12.70 14.73 L1 6.35 P 3.54 4.08 Q 2.54 3.42 All Dimensions in mm A A1 Q 5° 10° D 5° D1 L1 1 2 3 5° 5° 3 x b1 A2 L 3xb 2xe c ITO-220AB (Note 8) Dim Min Typ Max A 4.50 4.70 4.90 A1 3.04 3.24 3.44 A2 2.56 2.76 2.96 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 c 0.50 0.60 0.70 D 15.67 15.87 16.07 D1 8.99 9.19 9.39 e 2.54 E 9.91 10.11 10.31 L 9.45 9.75 10.05 L1 15.80 16.00 16.20 P 2.98 3.18 3.38 Q 3.10 3.30 3.50 All Dimensions in mm A E ITO-220AB Alternate (Note 8) A1 ØP Q ØP E Dim + D L1 D1 A2 b1 L b c Min Max A 4.36 4.77 A1 2.54 3.1 A2 2.54 2.8 b 0.55 0.75 b1 1.2 1.5 c 0.38 0.68 D 14.5 15.5 D1 8.38 8.89 E 9.72 10.27 e 2.41 2.67 L 9.87 10.67 L1 15.8 17 ØP 3.08 3.39 Q 2.6 3.0 All Dimensions in mm e Notes: 8. For product manufactured with Date Code 0733 (week 33, 2007) and newer, please refer to ITO-220AB dimensions. For product manufactured prior to Date Code 0733, please refer to ITO-220AB ALTERNATE dimensions. SBR is a registered trademark of Diodes Incorporated. SBR4040 Document number: DS30986 Rev. 5 - 2 4 of 5 www.diodes.com May 2012 © Diodes Incorporated SBR4040CT SBR4040CTFP IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2012, Diodes Incorporated www.diodes.com SBR is a registered trademark of Diodes Incorporated. SBR4040 Document number: DS30986 Rev. 5 - 2 5 of 5 www.diodes.com May 2012 © Diodes Incorporated