aPR33DB-C2.1 User Guide

Integrated Circuits Inc.
aPR33DB-C2.1
aPR33DB-C2.1 (Fixed 1/ 2/ 4/ 8 Message mode)
Demo Board User Guide
aPR33DB-C2.1 is suitable for aPR33A1 / aPR33A2 / aPR33A3, 3 chips with supporting Fixed
1/2/4/8 message, 4 modes.
■ aPR33DB –C2.1 Function:
:
PCB size : 51 x 39 mm
◆ RECORDING VOICE MESSAGE :
SLIDE SW to REC → Press and hold TACT SW(M0), hear BEEP sound with LED on to start REC
through Microphone → Release TACT SW, hear BEEP BEEP sound with
LED off to complete REC.
◆ PLAY VOICE MESSAGE :
SLIDE SW to PLAY → Press and leave TACT SW(M0) to play voice with LED on. After play
finished, LED will off.
Ver 2
1/4
02 / 26 / 2013
Integrated Circuits Inc.
aPR33DB-C2.1
Depends on different IC, 1/2/4/8 message modes can have different recording duration per message
as below table:
The initial setting is 8 message mode.User can define 1/2/4/8 message mode by setting MSEL0 and
MSEL1 pin as below:
●
8-Message Mode
●
●2-Message Mode
4-Message Mode
●1-Message Mode
If needs Line- In circuit application, please visit http://www.aplusinc.com.tw for datasheet.
Ver 2
2/4
02 / 26 / 2013
Integrated Circuits Inc.
aPR33DB-C2.1
VOICE OUTPUT
The aPR33DB support 2 voice output mode, PWM and DAC.
( Default : PWM )
The PWM mode use VOUT1 and VOUT2 pin to drive speaker.
The DAC mode use VOUT2 pin to connect your transistor or amplifier.
(A) PWM
(B) DAC
◎ For more DAC application, Please visit http://www.aplusinc.com.tw for data sheet.
Ver 2
3/4
02 / 26 / 2013
Integrated Circuits Inc.
aPR33DB-C2.1
Ver. 2
Add “DAC” application.
Ver. 1
Original version aPR33DB-C1.0 User Guide
Ver 2
4/4
02 / 26 / 2013