Illuminated Switches TL7 Series 7mm Size right Angle Type illuminated Tactile Switch CIRCUIT P.C.B. LAYOUT TL7LN...B...R1A1... CIRCUIT P.C.B. LAYOUT TL7LN...B...N... SPECIFICATIONS: > Rating: > Contact Resistance: > Insulation Resistance: > Dielectric Strength: > Electrical Life: > Stroke: > Operating Temperature: > Preservative Temperature: All specifications are restricted to QA test criteria. DRW: B.R. JIN, CHK: P.G. GAO, APP: F. H. KANG, DC: 2012-06-27 UPD: 2013-07-01 > Wave Soldering Conditions: 50mA 12VDC 100 mOhms Max. 100 MOhms Min. (500VDC) 250VAC 1 Minute 500,000 Cycles 0.20±0.10 mm -40°C ~ +85°C -40°C ~ +85°C (Single Condition) -20°C ~ +60°C (Taping Condition) 260°C Max. 5 Seconds Cap Type R1 MATERIALS: > Contact & Cover: Stainless Steel >Terminals: Brass with Silver plated > Base/Stem: LCP UL94V-0 > Cap: PES UL94V-0 Cap Type R2 HOW TO ORDER: 1 2 3 4 5 6 7 8 9 10 UNIT: mm [inch] General Tolerance: ±0.2mm TL7 1 ILLUMINATION: L with LED N without LED 2 GROUND: G with Ground Pins N without Ground Pins 3 OPERATING FORCE: 10 100 gf 16 160 gf 26 260 gf 4 LED TYPE: B See Drawing: N without LED [email protected] 5 LED COLOR: C=Red F=Green G=Blue E=Yellow B=White PF=PureGreen MB=Amber/White MF=Amber/Green MPF=Amber/PureGreen CF=Red/Green, CG=Red/Blue FE=Green/Yellow blank=without LED 6 CAP TYPE: N without Cap R1 Cap Type R1 (see drawings) R2 Cap Type R2 (see drawings) CAP COLOR: A Black S Silver T Transparent blank without Cap 7 8 CAP MARKING: N with Cap, but no Marking blank without Cap 1 { 4 2 5 3 z 9 MATERIALS: N Standard H Halogen-Free PACKAGING: TB Tube TY Tray 10 www.greatecs.com