Potentiometers Square Single-Turn Cermet Trimmer 0.015 (0.3 8) MAX. TYP. CIRCUIT DIAGRAM 0.190 ± 0.010 (4. 83) 0.1 88 (4.7 8) MIN. TYP. GP59 Series 0.395 ± 0.015 (10.03) 2 0.220 ± 0.010 (5.5 8) Wiper 1 0.020 ± 0.003 WIDE x 0.012 ± 0.002 THICK TYP. (0.51 x 0.03) 3 Clockwise Dimension in inches (mm) PIN STYLE 0.100 (2.54) 0.100 ± 0.10 CL (2.54) ROTOR 0.200 ± 0.010 (15.0 8) 0.375 ± 0.015 TYP. (9.52) 0.100 ± 0.010 (2.54) 0.100 ± 0.010 ROTOR (2.54) CL 0.100 ± 0.10 (2.54) 0.100 ± 0.010 (2.54) 0.375 ± 0.015 TYP C L (9.52) ROTOR P M 0.40 (1.02) 0.045 (1.14) S X SPECIAL (PIN STYLES P AND M) (ALL PIN STYLES) (All PIN STYLES) 0.330 ± 0.010 Ø (8.3 8) 0.410 ± 0.020 (10.41) 0.550 ± 0.015 Ø (13.97) 0.320 ± 0.010 (8.13) T607 Tolerances unless otherwise sp T640 2 3 4 5 All specifications are restricted to QA test criteria. DRW: D.L. JIN, CHK: D.F. LEE, APP: H.Z. QIU GP59 1 P M S X STYLE: See above drawings See above drawings See above drawings See above drawings 4 SPECIAL NUMBER: T607 See above drawings T640 See above drawings T614 See above drawings 2 OHM VALUE: free text 100ȍ to 2Mȍ 5 PACKING: BK2 Box 200 pieces BK1 Box 100 pieces 3 TOLERANCE: Tolerance=10% 10 [email protected] T614 0.38) How to order 1 0.119 (3.02) FEATURES > Arrow and graduations forrepeatable settings > “O” ring seal forsolvent and aqueous washing > I.C. style pins for easy PCB assembly > Rigid board mounting achieved with pins secured in housing > Solder plated terminals for good solderability > High temperature soldered terminations for high reliability > Multi-finger wiper for better contact resistance > Solid end stop > Test according to CECC41000 www.greatecs.com 1 Potentiometers Square Single-Turn Cermet Trimmer GP59 Series SPECIFICATIONS ELECTRICAL SPECIFICATIONS ective Travel Resistance Range Resistance Tolerance End Resistance nt of Resistance (Typical) Temperature Co 270° nominal 100 Ω to 2 M Ω ± 10 % 2 : or 1 %, whichever is greater 100 ppm/°C 0.5 W at 70 °C derated linearly to 0 W at 125 °C Maximum voltage not to exceed 250 V 1000 V AC at sea level; 250 V AC at 80 000 ft (24 000 meters) 1000 M : minimum 1 % or 1 : , whichever is greater Power Rating Dielectric Withstanding Voltage Insulation Resistance (500 V DC ) Contact Resistance Variation MECHANICAL SP ECIFICATIONS Stop Strength Starting Torque Weight Resistance Element 2 Terminal Adjustability 3 Terminal Adjustability Solid 35 mNm maximum 0.03 oz. (0.85 g) maximum Cermet ± 0.15 % of RT ± 0.05 % of applied voltage ENVIRONMENTAL SPECIFICATION Temperature Range Climatic Category Sealing - 55 °C to + 125 °C 55/125/21 Fully sealed container IP67 PERFORMANCES TE S T Bumps Vibration Electrical Endurance Soldering Resistance to Heat Damp Heat Steady State Mechanical Life Terminal Strength [email protected] C O N D IT IO N S MAX. (R) 390 m/s 2, 4000 98 m/s 2 , 10 to 500 Hz 1000 h 21 days 200 cycles 2 . 2 lbs ( 1 k g) 1% 1% 3% 1% 3% 3% min. CHANGE PER CECC V AB 41 100 V AC 2% - (PARA 2.3.3) (PARA 2.3.2) (PARA 2.5.16) (PARA 2.3.7) (PARA 2.3.7) (PARA 2.1) - PER IEC PER MIL TEST EB (IEC 68 - 2 - 29) TEST FC (IEC 68 - 2 - 6) TEST TB (IEC 68 - 2 - 20) TEST TB (IEC 68 - 2 - 20A) TEST C (IEC 68 - 2 - 3) METHOD 2 - NO EQUIV METHOD 204 NO EQUIV METHOD 208 METHOD 210 METHOD 103 - www.greatecs.com 2