BR106 thru BR1010 Single Phase Silicon Bridge Rectifier VRRM = 600 V - 1000 V IO = 10 A Features • Low forward voltage drop • Low leakage current • Types from 600 V up to 1000 V VRRM • Not ESD Sensitive BR-10 Package Mechanical Data Case: Molded plastic body Polarity: marked on the body Mounting: Hole thru for #6 screw Mounting position: Any Maximum ratings at Tc = 25 °C, unless otherwise specified Parameter Symbol Conditions BR106 BR108 BR1010 Unit 1000 V Repetitive peak reverse voltage VRRM 600 800 RMS reverse voltage VRMS 420 560 700 V DC blocking voltage Operating temperature Storage temperature VDC Tj Tstg 600 -55 to 150 -55 to 150 800 -55 to 150 -55 to 150 1000 -55 to 150 -55 to 150 V °C °C Electrical characteristics at Tc = 25 °C, unless otherwise specified Single phase, half sine wave, 60 Hz, resistive or inductive load For capacitive load derate current by 20% Parameter Symbol Conditions BR106 BR108 BR1010 Unit Maximum average forward rectified current IO Tc = 50 °C 10 10 10 A Peak forward surge current IFSM tp = 8.3 ms, half sine 150 150 150 A Maximum instantaneous forward voltage drop per bridge element VF IF = 5.0 A 1.1 1.1 1.1 V Maximum DC reverse current at rated DC blocking voltage IR Ta = 25 °C 10 10 10 Ta = 100 °C 1000 55 9.4 1000 55 9.4 1000 55 Typical junction capacitance Typical thermal resistance Cj RΘJA www.genesicsemi.com/silicon-products/bridge-rectifiers/ 1 9.4 μA pF °C/W BR106 thru BR1010 www.genesicsemi.com/silicon-products/bridge-rectifiers/ 2 BR106 thru BR1010 Package dimensions and terminal configuration Product is marked with part number and terminal configuration. Di Dimensions i iin iinches h and d ((millimeters) illi t ) www.genesicsemi.com/silicon-products/bridge-rectifiers/ 3