Green Power Solutions srl Via Venezia 34D - 10088 Volpiano (TO), Italy Phone: +39-011-988 2251 Fax: +39-011-988 1358 Web: www.gpsemi.it e-mail: [email protected] GPTP2190 PHASE CONTROLLED SCR High reliability operation DC power supply AC drives VOLTAGE UP TO 1800 V AVERAGE CURRENT 1900 A SURGE CURRENT BLOCKING CHARACTERISTICS Characteristic Conditions 31 kA Value VRRM Repetitive peak reverse voltage 1800 V VRSM Non-repetitive peak reverse voltage 1900 V VDRM Repetitive peak off-state voltage IDRM IRRM Repetitive peak off-state current, max. Repetitive peak reverse current, max. 1800 V VDRM, single phase, half wave, Tj = Tjmax VRRM, single phase, half wave, Tj = Tjmax 75 mA 75 mA ON-STATE CHARACTERISTICS IT(AV) Average on-state current Sine wave,180° conduction, Th = 55 °C 1900 A IT(RMS) R.M.S. on-state current Sine wave,180° conduction, T h = 55 °C Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax 2984 A ITSM Surge on-state current I²t VT(TO) I² t for fusing coordination Threshold voltage Tj = Tjmax 0,90 V rT On-state slope resistance Tj = Tjmax 0,177 mΩ VTM Peak on-state voltage, max IH IL Holding current, max Latching current, typ On-state current IT = 2000 A , Tj = 25 °C Tj = 25 °C Tj = 25 °C 31 kA 4805 kA²s 1,32 V 300 mA 700 mA TRIGGERING CHARACTERISTICS Gate trigger voltage Tj = 25 °C, V D = 5 V IGT Gate trigger current Tj = 25 °C, V D = 5 V 300 mA VGD Non-trigger voltage VD = 67% VRRM, Tj = Tjmax 0,25 V Pulse width 100 µs 150 W VGT 2,5 V PGM Peak gate power dissipation PG(AV) Average gate power dissipation IFGM Peak gate current 10 A VFGM VRGM Peak gate voltage (forward) Peak gate voltage (reverse) 10 V 12 V 2 W SWITCHING CHARACTERISTICS di/dt Critical rate of rise of on-state current Tj = Tjmax 200 A/µs dV/dt tq Critical rate of rise of off-state voltage Tj = Tjmax 1000 V/µs Turn-off time, typ Tj = Tjmax, IT = 1000 A, di/dt = -20 A/µs µs VR = 50 V, VD = 67% VDRM, dV/dt = 20 V/µs THERMAL AND MECHANICAL CHARACTERISTICS Rth(j-c) Thermal resistance (junction to case) Double side cooled 0,015 °C/W Rth(c-h) Thermal resistance (case to heatsink) Double side cooled 0,006 °C/W Tjmax Max operating junction temperature Tstg Storage temperature F Clamping force ± 5% Mass Document GPTP2190T001 125 °C -40 / 125 °C 23 kN 500 g GPTP2190 PHASE CONTROLLED SCR Current rating - sine wave 3500 180° 3000 90° 30° 2000 1500 1000 500 30° 0 400 60° 800 90° 1200 120° 1600 180° 0 0 2000 400 Maximum surge current d.s. cooled 1200 1600 2000 On-state voltage drop 35 30 25 [A] ITIT[A] 20 15 10 5 0 1 800 IT[A] IT [A] ITSM [A] 120° 60° 2500 PF [W] Heatsink temperature [°C] 130 120 110 100 90 80 70 60 50 Power loss - sine wave 10 100 4000 4000 3500 3500 3000 3000 2500 2500 2000 2000 1500 1500 1000 1000 500 500 00 0 0,5 Tj=Tjmax 0,5 1 1 Tj=Tjmax 1,5 1,5 V VTT [V] [V] Number of cycle current pulses [n] 75 Thermal impedance (j-c) ZTH(j-c) [°C / W] 1 0,8 0,6 0,4 0,2 0 0,001 0,01 0,1 1 10 100 Time [s] dimensions mm In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. Document GPTP2190T001 2