8 4 5 6 7 2 3 SNC-3753 DWG. NO. THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF BUD INDUSTRIES INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF BUD INDUSTRIES INC. IS PROHIBITED. ISSUE A M6 x 16mm LG. WELD STUD (FOR GROUNDING DO NOT POWDER COAT) 12.06 COVER 306.32 F 5.91 REF. 149.99 .45 11.43 B B C MATERIAL: BODY, COVER MOUNTING BRACKETS, COVER - 16 GA. [1.5mm] C.R.S. INTERNAL PANEL - 14 GA. [2.0mm] C.R.S. WALL MOUNTING BRACKETS - 14 GA. [2.0mm] STAINLESS STEEL HARDWARE - STAINLESS STEEL GASKET - .25 [6.35] THICK NEOPRENE (BLACK) OR EQUIVALENT SEALING WASHERS - BLACK NEOPRENE OR EQUIVALENT REVISIONS REVISED DESIGN 6-30-08 DAB PER ECN #10404 12-4-08 DAB PER ECN #10446 1-13-09 BT F FINISH: BODY & COVER - LIGHT GRAY SMOOTH POWDER COAT INTERNAL PANEL - ZINC CHROMATE WALL MOUNTING BRACKETS - NATURAL 5.33 135.33 .38 9.53 RETAINING CLIP (4x) E E 12.06 306.32 COVER 13.03 330.96 SEALING WASHER (4x) M5x0.8 CAPTIVE SCREW (4x) .69 17.53 D D 10.35 262.89 WALL MOUNTING BRACKET KIT TO CONTAIN THE FOLLOWING: (4) BRACKETS, (4) BOLTS, (4) SEALING WASHERS, (4) FLAT WASHERS, (4) LOCKWASHERS & (4) HEX NUTS B C .437 [11.10] x .687 [17.45] OBLONG EACH BRACKET SEE DETAIL "B" (INSIDE VIEW) 11.81 BODY 299.97 M8 x 16mm LG. WELD STUD/STANDOFF (4x) (FLAT WASHER, LOCKWASHER & HEX NUT FOR INTERNAL PANEL MOUNTING) 9.86 250.44 B C C NO GAP BETWEEN GASKET JOINT. OPTIONALLY JOINT MAY BE SEALED WITH ADHESIVE. WELD & GRIND SMOOTH ALL CORNERS B 11.17 OPENING 283.72 B 11.85 300.99 BODY B 11.21 284.73 OPENING .472 11.99 .250 (8x) 6.35 10.43 265.00 8.86 225.04 GASKET .50 TYP. 12.70 .344 (8x) 8.74 .984 24.99 B B .394 (4x) 10.01 A 1.76 44.70 DETAIL B SCALE 2 : 2.75 .787 19.99 .644 16.36 .41 10.41 A .125 [3.18] x .125 [3.18] CHAMFER (8x) INTERNAL PANEL DETAIL 8.86 224.99 A .492 12.50 1.125 28.58 WELD & GRIND SMOOTH ALL CORNERS & SEAMS FRONT VIEW (LESS COVER) 1.476 37.49 A PARTS LIST .984 24.99 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] DETAIL A SCALE 2 : 2.75 USED ON QTY. 8 7 6 5 4 3 2 CAD GENERATED DRAWING, DO NOT MANUALLY UPDATE APPROVALS TOLERANCES: DECIMALS: .XX .03 .XXX .010 MATERIAL AS NOTED CHECKED FINISH AS NOTED APPROVED DO NOT SCALE DRAWING DRAWN DAB BUD INDUSTRIES INC. DATE 5-5-08 NEMA SHEET METAL BOX w/LIFT-OFF SCREW COVER SIZE DWG. NO. D SCALE SNC-3753 CAD FILE: 1 REV. SHEET 1 OF 1