E nvironm e n ta l ly s e a le d RF Connector Protective Covers and Accessories for mil-prf-39012 and other Mil/aero rf connectors AUGUST 2013 RF Connector Covers and Accessories series 65 & 66 Radio Frequency Connector Covers and Accessories Military standard protective cover and stowage receptacle performance: •• Reliable, robust protection against environmental and mechanical damage •• Wide range of heavy-duty protective cover attachment and lanyard options •• Military standard and high-performance Glenair materials and platings •• Heavy-duty performance for rugged application environments Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000 [email protected] © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 2 E-Mail: [email protected] RF Connector Covers and Accessories RF Coax Connector Protective Covers and Accessories Table of Contents Table of Contents 650-072 Dummy Stowage Receptacle for (Type HN) Coaxial RF Connectors 4 650-073 Dummy Stowage Receptacle for Type MIL-PRF-39012 (SMA) Coaxial RF Connectors 5 650-074 Dummy Stowage Receptacle for MIL-PRF-39012 (Type N) Coaxial RF Connectors 6 650-075 Dummy Stowage Receptacle for Type MIL-PRF-39012 (TNC) Coaxial RF Connectors 7 650-076 Dummy Stowage Receptacle for Type MIL-PRF-39012 (BNC) Coaxial RF Connectors 8 660-101 Protective Dust Cover for (Type HN) Coaxial RF Plug Connectors 9 660-102 Protective Dust Cover for (Type HN) Coaxial RF Receptacle Connectors 10 660-103 Protective Dust Cover for Type MIL-PRF-39012 (SMA) Coaxial RF Plug Connectors 11 660-104 Protective Dust Cover for Type MIL-PRF-39012 (SMA) Coaxial RF Receptacle Connectors 12 660-105 Protective Dust Cover for Type MIL-PRF-39012 (Type N) Coaxial RF Plug Connectors 13 660-106 Protective Dust Cover for Type MIL-PRF-39012 (Type N) Coaxial RF Receptacle Connectors 14 660-107 Protective Dust Cover for Type MIL-PRF-39012 (Type TNC) Coaxial RF Plug Connectors 15 660-108 Protective Dust Cover for Type MIL-PRF-39012 (Type TNC) Coaxial RF Receptacle Connectors 16 660-109 Protective Dust Cover for Type MIL-PRF-39012 (Type BNC) Coaxial RF Plug Connectors 17 660-110 Protective Dust Cover for Type MIL-PRF-39012 (Type BNC) Coaxial RF Receptacle Connectors 18 667-127 Protective Receptacle Cover and Dummy Plug for MIL-DTL-38999 Series II Type BNC RF Coax Connectors 19 © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 1 E-Mail: [email protected] RF Connector Covers and Accessories RF Connector Protective Covers and Accessories Introduction Stainless steel wire rope lanyards provide high pull strength, flexibility and durability Sash chain styles lie flat to equipment housings and panels Precision-machined stowage receptacles, and plug and receptacle covers deliver up to 2000 mating/unmating cycles Wide range of mil-spec and commercial plating options ensure appropriate grounding and corrosion protection Environmental sealing, reliable attachment, and rugged performance MIL-PRF-39012 RF connectors are used in high-performance military and aerospace applications such as microwave radio, communication base stations, antennas, satellite communications, radar, and RF instrumentation. Proper environmental and mechanical protection of these mission-critical coaxial connectors relies on protective covers and stowage receptacles. Only Glenair offers the complete range of these accessories, in-stock and ready for immediate, same-day shipment. All components are precision machined and equipped with customer’s choice of appropriate lanyard and attachment hardware. From satellite communications to microwave radio systems and base stations, Glenair RF connector protective covers help extend service life and protect valuable equipment © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 2 E-Mail: [email protected] Table I: Attachments Sym Chain D Bead Chain, Cres, Passivate S #8 Sash Chain, Cres, Passivate Sym Wire Rope F Wire Rope, Nylon Jacket H Wire Rope, Teflon Jacket R Wire Rope, PVC Jacket T Wire Rope, No Jacket Sym Fabric Rope G Flexible Nylon Rope Sym None N No Attachment NB No Lanyard or Attachment Boss BEAD CHAIN (Type D) WIRE ROPE (Types F, H, R, T) A Dia. (Table III) Length + .250 (6.4) A Dia. (Table III) Length + .250 (6.4) NYLON ROPE (Type G) SASH CHAIN (Type S) A Dia. (Table III) Length + 1 Link NOTES Slip Knot Type SK and SCS 1. Slip/Crimp Sleeve (SCS) for Type G Nylon Cord only provides “slip knot” adjustment. May be crimped for permanent attachment. 2. Crimp Ferrule (CF) for Type S Wire Rope only. Supplied loose for user termination. Type CF CF - Crimp Ferrule Supplied Loose for Wire Rope (S) Only (See Table IV) Length Determined At.50 Dia Length to End of Wir Type WS SK SCS ngth mined 0 Dia RF Connector Covers and Accessories RF Coax Connector Protective Covers Attachment Selections, Ring and Eyelet Dimensions Type CF CF - Crimp Ferrule Supplied Loose for Wire Rope (S) Only (See Table IV) Length to End of Wir pe WS Code M MT NF ZR Z1 BM WB Table II: Materials and Finishes Material Finish Electroless Nickel Aluminum Alloy 6061-T6 Nickel Teflon Cadmium, Olive Drab Zinc-Nickel, Black 303 Stainless Steel Brass Passivate Brass - Electroless Nickel White Bronze (Non-Magnetic) SOLID RING - Style A EYELET B Dia. SPLIT RING - Style C L Dia. A Dia. Table III: Eyelet Dash P Dia ±.010 (0.3) No. 01 .140 (3.6) 04 .197 (5.0) 06 .125 (3.2) 09 .156 (4.0) 00 No Eyelet WS With Strap SK Slip Knot SCS Slip/Crimp Sleeve CF Crimp Ferrule (Loose) © 2013 Glenair, Inc. Table IV: Style A Ring Diameter Dash N Dia No. ±.015 (0.4) 095 100 101 102 103 105 106 107 Table V: Style C Ring Diameter Dash L Dia No. ±.015 (0.4) .312 (7.9) .391 (9.9) .516 (13.1) .583 (14.8) .641 (16.3) .766 (19.5) .896 (22.2) 1.016 (25.8) U.S. CAGE Code 06324 52 54 56 58 60 Rev. 03.10.15 .485 .640 .750 .890 1.015 (12.3) (16.3) (19.1) (22.6) (25.8) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 3 E-Mail: [email protected] RF Connector Covers and Accessories 650-072 Dummy Stowage Receptacle for RF Coax Type HN Connectors Basic Number 650-072 = Type HN 650-072 Finish (See Table II) NF .812 (20.6) SQ .875 (22.2) .125 (3.2) 1.093 (27.8) SQ .750-20 UNEF-2A Ø.125 (3.2) 4 Places Code M MT NF ZR Z1 BM WB Table II: Materials and Finishes Material Finish Electroless Nickel Nickel Teflon Aluminum Alloy 6061-T6 Cadmium, Olive Drab Zinc-Nickel, Black 303 Stainless Steel Passivate Brass - Electroless Nickel Brass White Bronze (Non-Magnetic) APPLICATION NOTES © 2013 Glenair, Inc. 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Material/Finish - See Table II 3. Metric dimensions (mm) are in parentheses. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 4 E-Mail: [email protected] RF Connector Covers and Accessories 650-073 Dummy Stowage Receptacle for MIL-PRF-39012 RF Coax Type SMA Connectors Finish (See Table II) Basic Number 650-073 = Type SMA 650-073 NF .342/.338 (8.7/8.6) SQ .500 (12.7) .075/.055 (1.9/1.4) .510/.490 (13.0/12.4) SQ .250-36 UNS-2A .112/.092 Dia (2.8/2.3) 4 Places Code M MT NF ZR Z1 BM WB Table II: Materials and Finishes Material Finish Electroless Nickel Nickel Teflon Aluminum Alloy 6061-T6 Cadmium, Olive Drab Zinc-Nickel, Black 303 Stainless Steel Passivate Brass - Electroless Nickel Brass White Bronze (Non-Magnetic) APPLICATION NOTES © 2013 Glenair, Inc. 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Material/Finish - See Table II 3. Metric dimensions (mm) are in parentheses. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 5 E-Mail: [email protected] RF Connector Covers and Accessories 650-074 Dummy Stowage Receptacle for MIL-PRF-39012 RF Coax Type N Connectors Finish (See Table II) Basic Number 650-074 = Type N 650-074 NF .718 (18.2) SQ .740 (18.8) .080 (2.0) 1.00 (25.4) SQ .625-24 UNEF-2A Ø.125 (3.2) 4 Places Code M MT NF ZR Z1 BM WB Table II: Materials and Finishes Material Finish Electroless Nickel Nickel Teflon Aluminum Alloy 6061-T6 Cadmium, Olive Drab Zinc-Nickel, Black 303 Stainless Steel Passivate Brass - Electroless Nickel Brass White Bronze (Non-Magnetic) APPLICATION NOTES © 2013 Glenair, Inc. 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Material/Finish - See Table II. 3. Metric dimensions (mm) are in parentheses. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 6 E-Mail: [email protected] RF Connector Covers and Accessories 650-075 Dummy Stowage Receptacle for MIL-PRF-39012 RF Coax Type TNC Connectors Basic Number 650-075 = Type TNC 650-075 Finish (See Table II) NF .505/.495 (12.8/12.6) SQ .80 (20.3) Max .095/.075 (2.4/1.9) .697/.682 (17.7/17.3) SQ .4375-28 UNEF-2A .135/.115 Dia (3.4/2.9) 4 Places Code M MT NF ZR Z1 BM WB Table II: Materials and Finishes Material Finish Electroless Nickel Nickel Teflon Aluminum Alloy 6061-T6 Cadmium, Olive Drab Zinc-Nickel, Black 303 Stainless Steel Passivate Brass - Electroless Nickel Brass White Bronze (Non-Magnetic) APPLICATION NOTES © 2013 Glenair, Inc. 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Material/Finish - See Table II. 3. Metric dimensions (mm) are in parentheses. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 7 E-Mail: [email protected] RF Connector Covers and Accessories 650-076 Dummy Stowage Receptacle for MIL-PRF-39012 RF Coax Type BNC Connectors Basic Number 650-076 = Type BNC Finish (See Table II) 650-076 NF .505/.495 (12.8/12.6) Typ .80 (20.3) Max .697/.682 (17.7/17.3) Typ .095/.075 (2.4/1.9) .382/.378 (11.07)/(9.60) .135/.115 Dia (3.4/2.9) (4 Places) Code M MT NF ZR Z1 BM WB Table II: Materials and Finishes Material Finish Electroless Nickel Nickel Teflon Aluminum Alloy 6061-T6 Cadmium, Olive Drab Zinc-Nickel, Black 303 Stainless Steel Passivate Brass - Electroless Nickel Brass White Bronze (Non-Magnetic) APPLICATION NOTES © 2013 Glenair, Inc. 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Material/Finish - See Table II. 3. Metric dimensions (mm) are in parentheses. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 8 E-Mail: [email protected] RF Connector Covers and Accessories 660-101 Plug Dust Cover for RF Coax Type HN Connectors Eyelet / Ring Type and Size (See Tables III, IV and V, page 3) Finish (See Table II) Basic Number 660-101 = Type HN 660-101 NF G 01 - 2 Attachment Length (In Inches) Recommended Length = 2.0 Inches Attachment (See Table I, page 3) .875 (22.23) Max SOLID RING - Style A B Dia. Table IV Page 3 .125 (3.18) Max Gasket 1.093 (27.76) Max Lug Termination Dash No -02 Thru -160 (See Table IV, Page 3) Length ± .13 (3.3) See P/N Development .750-20 UNEF-2A Code M MT NF ZR Z1 BM WB Nickel Teflon Cadmium, Olive Drab Zinc-Nickel, Black Brass ØA Table III Page 3 Gaskets – Silicone or neoprene/N.A. Attachments – See page 3 Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishes Crimp Rings and Eyelets – CRES/passivate Electroless Nickel 303 Stainless Steel L Dia. Table V Page 3 Material and Finishes: Table II: Materials and Finishes Material Finish Aluminum Alloy 6061-T6 SPLIT RING - Style C Composite and other materials and finishes available. Please consult factory Passivate Brass - Electroless Nickel White Bronze (Non-Magnetic) APPLICATION NOTES 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Attachment to withstand 25 Lb. pull test. 3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 9 E-Mail: [email protected] RF Connector Covers and Accessories 660-102 Receptacle Dust Cover for RF Coax Type HN Connectors Basic Number 660-102 = Type HN Eyelet / Ring Type and Size (See Tables III, IV and V, page 3) Finish (See Table II) 660-102 NF G Attachment (See Table I, page 3) 01 - 2 Attachment Length (In Inches) Recommended Length = 2.0 Inches SOLID RING - Style A .875 (4.73) Max .750-20 UNEF-2B B Dia. Table IV Page 3 .125 (3.18) Max Gasket 1.093 (27.76) Max Length ± .13 (3.3) See P/N Development Code M MT NF ZR Z1 BM WB SPLIT RING - Style C Lug Termination Dash No -02 Thru -160 (See Table IV, Page 3) Gaskets – Silicone or neoprene/N.A. Attachments – See page 3 Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishes Crimp Rings and Eyelets – CRES/passivate Electroless Nickel Nickel Teflon Cadmium, Olive Drab Zinc-Nickel, Black 303 Stainless Steel Brass ØA Table III Page 3 Material and Finishes: Table II: Materials and Finishes Material Finish Aluminum Alloy 6061-T6 L Dia. Table V Page 3 Composite and other materials and finishes available. Please consult factory Passivate Brass - Electroless Nickel White Bronze (Non-Magnetic) APPLICATION NOTES 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Attachment to withstand 25 Lb. pull test. 3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 10 E-Mail: [email protected] RF Connector Covers and Accessories 660-103 Plug Dust Cover for MIL-PRF-39012 RF Coax Type SMA Connectors Eyelet / Ring Type and Size (See Tables III, IV and V, page 3) Finish (See Table II) Basic Number 660-103 = Series SMA 660-103 NF G Attachment (See Table I, page 3) .500 (12.7) Max .220 (5.59) Max .410 (10.4) Max Attachment Length (In Inches) Recommended Length = 2.0 Inches SOLID RING - Style A B Dia. Table IV Page 3 Gasket SPLIT RING - Style C Lug Termination Dash No -02 Thru -160 (See Table IV, Page 3) Length ±.13 (3.3) See P/n Development .250-36 UNS-2A Code M MT NF ZR Z1 BM WB 01 - 2 Gaskets – Silicone or neoprene/N.A. Attachments – See page 3 Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishes Crimp Rings and Eyelets – CRES/passivate Electroless Nickel Nickel Teflon Cadmium, Olive Drab Zinc-Nickel, Black 303 Stainless Steel Brass ØA Table III Page 3 Material and Finishes: Table II: Materials and Finishes Material Finish Aluminum Alloy 6061-T6 L Dia. Table V Page 3 Composite and other materials and finishes available. Please consult factory Passivate Brass - Electroless Nickel White Bronze (Non-Magnetic) APPLICATION NOTES 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Attachment to withstand 25 Lb. pull test. 3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 11 E-Mail: [email protected] RF Connector Covers and Accessories 660-104 Receptacle Dust Cover for MIL-PRF-39012 RF Coax Series SMA Connectors Eyelet / Ring Type and Size (See Tables III, IV and V, page 3) Finish (See Table II) Basic Number 660-104 = Series SMA 660-104 NF G 01 - 2 Attachment (See Table I, page 3) .500 (12.7) Max .220 (5.59) Min .250-36 UNS-2B Attachment Length (In Inches) Recommended Length = 2.0 Inches SOLID RING - Style A B Dia. Table IV Page 3 Gasket .410 (10.4) Max Lug Termination Dash No -02 Thru -160 (See Table IV, Page 3) Length ± .13 (3.3) See P/N Development Code M MT NF ZR Z1 BM WB Nickel Teflon Cadmium, Olive Drab Zinc-Nickel, Black Brass ØA Table III IV Page 3 Gaskets – Silicone or neoprene/N.A. Attachments – See page 3 Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishes Crimp Rings and Eyelets – CRES/passivate Electroless Nickel 303 Stainless Steel L Dia. Table V Page 3 Material and Finishes: Table II: Materials and Finishes Material Finish Aluminum Alloy 6061-T6 SPLIT RING - Style C Composite and other materials and finishes available. Please consult factory Passivate Brass - Electroless Nickel White Bronze (Non-Magnetic) APPLICATION NOTES 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Attachment to withstand 25 Lb. pull test. 3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 12 E-Mail: [email protected] RF Connector Covers and Accessories 660-105 Plug Dust Cover for MIL-PRF-39012 RF Coax Type N Connectors Eyelet / Ring Type and Size (See Tables III, IV and V, page 3) Finish (See Table II) Basic Number 660-105 = Type N 660-105 NF G 01 - 2 Attachment Length (In Inches) Recommended Length = 2.0 Inches Attachment (See Table I, page 3) .740 (18.80) Max SOLID RING - Style A .080 (2.03) Max B Dia. Table IV Page 3 Gasket 1.000 (25.4) Max Lug Termination Dash No -02 Thru -160 (See Table IV, Page 3) Length ± .13 (3.3) See P/N Development .625-24 UNEF-2A Code M MT NF ZR Z1 BM WB Gaskets – Silicone or neoprene/N.A. Attachments – See page 3 Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishes Crimp Rings and Eyelets – CRES/passivate Electroless Nickel Nickel Teflon Cadmium, Olive Drab Zinc-Nickel, Black 303 Stainless Steel Brass L Dia. Table V Page 3 ØA III Table IV Page 3 Material and Finishes: Table II: Materials and Finishes Material Finish Aluminum Alloy 6061-T6 SPLIT RING - Style C Composite and other materials and finishes available. Please consult factory Passivate Brass - Electroless Nickel White Bronze (Non-Magnetic) APPLICATION NOTES 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Attachment to withstand 25 Lb. pull test. 3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 13 E-Mail: [email protected] RF Connector Covers and Accessories 660-106 Receptacle Dust Cover for MIL-PRF-39012 RF Coax Type N Connectors Basic Number 660-106 = Type N Eyelet / Ring Type and Size (See Tables III, IV and V, page 3) Finish (See Table II) 660-106 NF G Attachment (See Table I, page 3) 01 - 2 Attachment Length (In Inches) Recommended Length = 2.0 Inches .740 (18.80) Max .625-24 UNEF-2B SOLID RING - Style A .080 (2.03) Max B Dia. Table IV Page 3 Gasket 1.000 (25.4) Max Lug Termination Dash No -02 Thru -160 (See Table IV, Page 3) Length ± .13 (3.3) See P/N Development Code M MT NF ZR Z1 BM WB Nickel Teflon Cadmium, Olive Drab Zinc-Nickel, Black Brass ØA III Table IV Page 3 Gaskets – Silicone or neoprene/N.A. Attachments – See page 3 Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishes Crimp Rings and Eyelets – CRES/passivate Electroless Nickel 303 Stainless Steel L Dia. Table V Page 3 Material and Finishes: Table II: Materials and Finishes Material Finish Aluminum Alloy 6061-T6 SPLIT RING - Style C Composite and other materials and finishes available. Please consult factory Passivate Brass - Electroless Nickel White Bronze (Non-Magnetic) APPLICATION NOTES 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Attachment to withstand 25 Lb. pull test. 3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 14 E-Mail: [email protected] RF Connector Covers and Accessories 660-107 Plug Dust Cover for MIL-PRF-39012 RF Coax Series TNC Connectors Eyelet / Ring Type and Size (See Tables III, IV and V, page 3) Finish (See Table II) Basic Number 660-107 = Series TNC 660-107 NF G Attachment (See Table I, page 3) .700 (17.8) Max .420 (10.67) Max .590 (15.0) Max Attachment Length (In Inches) Recommended Length = 2.0 Inches SOLID RING - Style A B Dia. Table IV Page 3 Gasket Lug Termination Dash No -02 Thru -160 (See Table IV, Page 3) Length ± .13 (3.3) See P/N Development .4375-28 UNEF-2A Code M MT NF ZR Z1 BM WB 01 - 2 Nickel Teflon Cadmium, Olive Drab Zinc-Nickel, Black Brass ØA Table IV III Page 3 Gaskets – Silicone or neoprene/N.A. Attachments – See page 3 Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishes Crimp Rings and Eyelets – CRES/passivate Electroless Nickel 303 Stainless Steel L Dia. Table V Page 3 Material and Finishes: Table II: Materials and Finishes Material Finish Aluminum Alloy 6061-T6 SPLIT RING - Style C Composite and other materials and finishes available. Please consult factory Passivate Brass - Electroless Nickel White Bronze (Non-Magnetic) APPLICATION NOTES 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Attachment to withstand 25 Lb. pull test. 3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 15 E-Mail: [email protected] RF Connector Covers and Accessories 660-108 Receptacle Dust Cover for MIL-PRF-39012 RF Coax Type TNC Connectors Eyelet / Ring Type and Size (See Tables III, IV and V, page 3) Finish (See Table II) Basic Number 660-108 = Series TNC 660-108 NF G Attachment (See Table I, page 3) .700 (17.78) Max .420 (10.67) Min .4375-28 UNEF 2-B 01 - 2 Attachment Length (In Inches) Recommended Length = 2.0 Inches SOLID RING - Style A B Dia. Table IV Page 3 Gasket .590 (14.99) Max Lug Termination Dash No -02 Thru -160 (See Table IV, Page 3) Length ± .13 (3.3) See P/N Development Code M MT NF ZR Z1 BM WB Nickel Teflon Cadmium, Olive Drab Zinc-Nickel, Black Brass ØA III Table IV Page 3 Gaskets – Silicone or neoprene/N.A. Attachments – See page 3 Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishes Crimp Rings and Eyelets – CRES/passivate Electroless Nickel 303 Stainless Steel L Dia. Table V Page 3 Material and Finishes: Table II: Materials and Finishes Material Finish Aluminum Alloy 6061-T6 SPLIT RING - Style C Composite and other materials and finishes available. Please consult factory Passivate Brass - Electroless Nickel White Bronze (Non-Magnetic) APPLICATION NOTES 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Attachment to withstand 25 Lb. pull test. 3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 16 E-Mail: [email protected] RF Connector Covers and Accessories 660-109 Plug Dust Cover for MIL-PRF-39012 Type BNC Male RF Coax Connectors Basic Number 660-109 = Type BNC Eyelet / Ring Type and Size (See Tables III, IV and V, page 3) Finish (See Table II) 660-109 NF G Attachment (See Table I, page 3) 01 - 2 Attachment Length (In Inches) Recommended Length = 2.0 Inches .640 (16.26) Max SOLID RING - Style A B Dia. Table IV Page 3 .590 .382 (14.99) (9.70) Max Max Lug Termination Dash No -02 Thru -160 (See Table IV, Page 3) Length ± .13 (3.3) See P/N Development Knurl Style Mfr Option Code M MT NF ZR Z1 BM WB Nickel Teflon Cadmium, Olive Drab Zinc-Nickel, Black Brass ØA Table III IV Page 3 Rivets, bayonet pins – CRES/Passivate Gaskets – Silicone or neoprene/N.A. Attachments – See page 3 Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishes Crimp Rings and Eyelets – CRES/passivate Electroless Nickel 303 Stainless Steel L Dia. Table V Page 3 Material and Finishes: Table II: Materials and Finishes Material Finish Aluminum Alloy 6061-T6 SPLIT RING - Style C Composite and other materials and finishes available. Please consult factory Passivate Brass - Electroless Nickel White Bronze (Non-Magnetic) APPLICATION NOTES 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Attachment to withstand 25 Lb. pull test. 3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 17 E-Mail: [email protected] RF Connector Covers and Accessories 660-110 Receptacle Dust Cover for MIL-PRF-39012 Type BNC RF Coax Connectors Basic Number 660-110 = Type BNC Eyelet / Ring Type and Size (See Tables III, IV and V, page 3) Finish (See Table II) 660-110 NF G Attachment (See Table I, page 3) 01 - 2 Attachment Length (In Inches) Recommended Length = 2.0 Inches SOLID RING - Style A .810 (20.57) Max Gasket .560 (14.22) Max Lug Termination Dash No -02 Thru -160 (See Table IV, Page 3) Length ± .13 (3.3) See P/N Development Knurl Style Mfr Option Code M MT NF ZR Z1 BM WB B Dia. Table IV Page 3 Nickel Teflon Cadmium, Olive Drab Composite and other materials and finishes available. Please consult factory Zinc-Nickel, Black Brass ØA Table III IV Page 3 Gaskets – Silicone or neoprene/N.A. Attachments – See page 3 Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishes Crimp Rings and Eyelets – CRES/passivate Electroless Nickel 303 Stainless Steel L Dia. Table V Page 3 Material and Finishes: Table II: Materials and Finishes Material Finish Aluminum Alloy 6061-T6 SPLIT RING - Style C Passivate Brass - Electroless Nickel White Bronze (Non-Magnetic) APPLICATION NOTES 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Attachment to withstand 25 Lb. pull test. 3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 18 E-Mail: [email protected] RF Connector Covers and Accessories 667-127 Special Protective Receptacle Cover and Dummy Plug for MIL-DTL-38999 Series II and Type BNC RF Coax Connectors Mates with MIL-DTL-39012 BNC RF Coax Connectors Basic Number Eyelet / Ring Type and Size (See Tables III, IV and V, page 3) Finish (SeeTable II) 667-127 NF - R Attachment Type Table I, Page 3 6 - 01 Attachment Length (In Inches) SOLID RING - Style A B Dia. Table IV Page 3 3.00 ±.250 (76.2 ± 13.2) Attachment Length SPLIT RING - Style C 1.750 (44.5) Max .382 (9.7) Max Mates with MIL-DTL-38999 Series II Shell Size 24 Connector Code M MT NF ZR Z1 BM WB L Dia. Table V Page 3 Mates with MIL-DTL-39012 (BNC) Coax Connector MIL-DTL-39012/16 Ref. 1.180 (30.0) Max Material and Finishes: Table II: Materials and Finishes Material Finish Gaskets – Silicone or neoprene/N.A. Attachments – See page 3 Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishes Crimp Rings and Eyelets – CRES/passivate Electroless Nickel Aluminum Alloy 6061-T6 Nickel Teflon Cadmium, Olive Drab Zinc-Nickel, Black 303 Stainless Steel Brass © 2013 Glenair, Inc. Composite and other materials and finishes available. Please consult factory Passivate Brass - Electroless Nickel White Bronze (Non-Magnetic) U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 19 E-Mail: [email protected] RF Connector Covers and Accessories Also Available from Glenair: MIL-DTL-55116 Type High-Performance Audio/Radio Connectors IAW MIL-DTL-55116 MIL-DTL-55116 Audio Connectors Advanced performance versions include improved sealing, package size reduction, and lightweight material options MIL-DTL-55116 Type Audio Plug, Field Serviceable with Wire Strain Relief MIL-DTL-55116 Type Molded Audio Plug MIL-DTL-55116 Type Audio Receptacle, Jam Nut Panel Mount MIL-DTL-55116 Type In-Line Audio Receptacle with Wire Strain Relief Overmolded cordsets Fully intermateable and intermountable with all industry-standard MILDTL-55116 connectors Mil-dtl-55116 type audio connectors for high-reliability, mission-critical communication systems—now available with advanced performance features including size/weight reduction and improved sealing MIL-DTL-55116 Specifications Current Rating DWV Insulation Resistance Operating Temperature Contact Resistance Water Immersion, Mated Water Ingress, Mated Durability Connector Type Cable Plug, with Strain Relief U-229 Cable Plug, Molded U-182 Receptacle, Jam Nut U-183 In-Line Receptacle U-228 © 2013 Glenair, Inc. Series 151 (standard) and 152 (advanced performance) MIL-DTL-55116 Type audio connectors are designed for high-reliability, severe environment radio communications equipment. They are available in both 5 pin and 6 pin configurations, with either crimp sleeve or solder cup pogo pin terminals. All feature versatile wire strain relief to protect cable conductors from damage. Shells are made of passivated stainless steel, contacts are gold plated copper alloy. Plug connector contacts are sealed in the unmated condition. 5 AMPS 500 VAC sea level, high altitude 300 VAC 1000 megohms minimum -55° C. to +85° C. 0.050 ohms maximum 6 ft, 48 hrs, mated condition, no leakage Ingress protection 67 3000 cycles of mating Contact Type Crimp Solder Crimp Solder Solder Crimp Solder Contact Layout 5 6 5 6 5 6 5 6 5 6 5 6 5 6 MIL SPEC IAW Glenair High Slash MIL-DTL-55116 Performance Sheet M55116/1 M55116/2 M55116/3 M55116/4 M55116/5 M55116/6 M55116/7 M55116/8 M55116/9 M55116/10 M55116/11 M55116/12 M55116/13 M55116/14 151-001-1 151-001-2 151-001-3 151-001-4 151-002-1 151-002-2 151-002-3 151-002-4 151-003-1 151-003-2 151-004-1 151-004-2 151-004-3 151-004-4 U.S. CAGE Code 06324 152-001-1 152-001-2 152-001-3 152-001-4 152-002-1 152-002-2 152-002-3 152-002-4 152-003-1 152-003-2 152-004-1 152-004-2 152-004-3 152-004-4 Mates with 151-003-1, 151-004-1, 151-004-3 151-003-2, 151-004-2, 151-004-4 151-003-1, 151-004-1, 151-004-3 151-003-2, 151-004-2, 151-004-4 151-003-1, 151-004-1, 151-004-3 151-003-2, 151-004-2, 151-004-4 151-003-1, 151-004-1, 151-004-3 151-003-2, 151-004-2, 151-004-4 151-001-1, 151-001-3, 151-002-1, 151-002-3 151-001-2, 151-001-4, 151-002-2, 151-002-4 151-001-1, 151-001-3, 151-002-1, 151-002-3 151-001-2, 151-001-4, 151-002-2, 151-002-4 151-001-1, 151-001-3, 151-002-1, 151-002-3 151-001-2, 151-001-4, 151-002-2, 151-002-4 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 20 E-Mail: [email protected] high-performance coaxial cable series 962 Mil-C-17 QPL and commercial G lenair high-performance Coax cables are constructed with silver plated conductors, insulated with fluoropolymer material, and finished with single or double layers of conductive shielding and appropriate jacket. Ideally suited for demanding military and commercial aerospace applications, these cables offer stable, predictable electrical performance under rugged mechanical and environmental conditions including repeated flexing, abrasion abuse, vibration, extreme temperatures, and exposure to aerospace fluids and chemicals. Glenair cable and contact engineers are available to review specific program requirements including environmental challenges, frequency requirements, loss budget, VSWR, and so on to select the most appropriate cable for every application. Also Available: High-Performance Coax Contacts for use in Multi-Pin Connectors Coax Pin Coax Socket Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000 [email protected] www.glenair.com Out of This World INTERCONNECT SOLUTIONS Glenair, Inc. 1211 Air Way • Glendale, California • 91201-2497 Telephone: 818-247-6000 • Fax: 818-500-9912 • [email protected] www.glenair.com Glenair Power Products Group 860 N. Main Street Extension Wallingford, CT 06492 Glenair Microway Systems 7000 North Lawndale Avenue Lincolnwood, IL 60712 Glenair Electric GmbH Schaberweg 28 61348 Bad Homburg Germany Glenair Italia S.p.A. Via Del Lavoro, 7 40057 Quarto Inferiore – Granarolo dell’Emilia Bologna, Italy © 2013 Glenair, Inc. Telephone: 203-741-1115 Facsimile: 203-741-0053 [email protected] Glenair UK Ltd 40 Lower Oakham Way Oakham Business Park P.O. Box 37, Mansfield Notts, NG18 5BY England Telephone: +44-1623-638100 Facsimile: +44-1623-638111 [email protected] Telephone: 847-679-8833 Facsimile: 847-679-8849 Glenair Nordic AB Gustav III : S Boulevard 46 S - 169 27 Solna Sweden Telephone: +46-8-50550000 Facsimile: +46-8-50550001 [email protected] Telephone: 06172 / 68 16 0 Facsimile: 06172 / 68 16 90 [email protected] Telephone: +39-051-782811 Facsimile: +39-051-782259 [email protected] Printed in U.S.A. Glenair Iberica C/ La Vega, 16 45612 Velada Spain Glenair France SARL 7, Avenue Parmentier Immeuble Central Parc #2 31200 Toulouse France Telephone: +34-925-89-29-88 Facsimile: +34-925-89-29-87 [email protected] Telephone: +33-5-34-40-97-40 Facsimile: +33-5-61-47-86-10 [email protected]