Conduit Assemblies Legacy Adapter to Adapter Pre-Terminated Assemblies Series 72 & 74 Tubing & Series 75 Conduit For use with adapters and transitions shown in Table III FOR ADAPTER-TO-ADAPTER APPLICATIONS Product Series 750 = Series 75 Metal Core Conduit 740 = Series 74 Helical Convoluted Tubing3 720 = Series 72 Annular Convoluted Tubing 750 N Conduit Type See Tables A Jacket Type V - Viton Jacket E - EPDM X - No Jacket H - Hypalon Jacket N- Neoprene Jacket O-RING A THREAD B DIA Finish See Table II 100 M End Fitting Material 100 = Aluminum 101 = Brass 116 = Stainless Steel Length In Inches 24 - 36 - P Conduit Dash No. See Table I Optional Tubing Material P = PFA T = PTFE K = PEEK E = ETFE Omit for FEP LENGTH 1.69 MAX (42.9) C DIA Notes 1. Metric dimensions (mm) are in parentheses and are for reference only. 2. Length tolerance is ± .250 (12.7) for lengths up to 24 inches (619.6 mm). Length tolerance for longer lengths is ± one percent (1%) of the length. 3. Pre-terminated assemblies using product Series 740 will be supplied with FEP material, standard wall thickness, standard convolutions, tin copper braid, and neoprene jacket. For other options consult factory. © 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com CA-1 E-Mail: [email protected] Conduit Assemblies Legacy Adapter to Adapter Pre-Terminated Assemblies Series 72 & 74 Tubing & Series 75 Conduit Table I: Thread Size Dash No. Availability 72 74 75 06 08 09 10 12 14 16 20 24 28 32 40 48 56 64 80 96 A Thread Class 2B B Max C Max 7/16 - 28 UNEF 1/2 - 20 UNF 9/16 - 24 UNEF 9/16 - 24 UNEF 5/8 - 24 UNEF 11/16 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1- 20 UNEF 1 3/16 - 18 UNEF 1 5/16 - 18 UNEF .640 (16.3) .640 (16.3) .690 (17.5) .690 (17.5) .760 (19.3) .890 (22.6) .890 (22.6) 1.024 (26.0) 1.152 (29.3) 1.363 (34.6) 1.488 (37.8) .188 (4.8) .250 (6.4) .281 (7.1) .312 (7.9) .375 (9.5) .438 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1 1/2 - 18 UNEF 1 3/4 - 18 UNS 2 - 18 UNS 2 1/4 - 16 UN 2 3/4 - 16 UN 3 1/4 - 16 UN 1.676 (42.6) 1.960 (49.8) 2.210 (56.1) 2.460 (62.5) 2.930 (74.4) 3.460 (87.9) 1.250 (31.8) 1.500 (38.1) 1.750 (44.5) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) B C D H J Code A B C Code B M N NF Z1 MT Table II: Finish Finish Olive Drab over Cadmium Plate Electroless Nickel Olive Drab over Cadmium Plate over Nickel Olive Drab over Cadmium Plate over Electroless Nickel (500 hour salt spray) Passivate Nickel-PTFE 710-114 – 117, -405 – 406 713-100 710-106 – 109, -370 – 371 710-077 © 2012 Glenair, Inc. D E F G Code A B C D Table III: Adapters and Transitions Part No. Ref. 710-100 Bulkhead Feed-Thru Male and Female Pipe Thread Adapters Circular Connector Adapter Y and T Transitions Multibranch Transitions Series 75 Conduit Types Braided Shield Bronze Braid Inner: Bronze Braid Brass Outer: Tin/Copper Braid Inner: Bronze Braid, Ferrous Shield: Tin Plated Brass Iron/Copper (SnCuFe) Outer: Tin/Copper Inner: Bronze Braid, Brass 1st Outer: Tin/Copper Braid 2nd Outer: Tin/Copper Braid Stainless Steel Stainless Steel Nickel/Iron Stainless Steel Code Conduit A Brass Series 74 Tubing Types Tubing Braided Shield FEP, PFA, PTFE, none PEEK, or ETFE FEP, PFA, PTFE, Braided Black Dacron® PEEK, or ETFE FEP, PFA, PTFE, Tin/Copper, 1 layer PEEK, or ETFE FEP, PFA, PTFE, Tin/Copper, 1 layer PEEK, or ETFE FEP, PFA, PTFE, Tin/Copper, 2 layers PEEK, or ETFE FEP, PFA, PTFE, Tin/Copper, 2 layers PEEK, or ETFE FEP, PFA, PTFE, none PEEK, or ETFE Tubing Kynar® Kynar® Kynar® Kynar® E Kynar® F Kynar® U.S. CAGE Code 06324 Series 72 Tubing Types Braided Shield none Tin/Copper internal braid Tin/Copper external braid Tin/Copper external braid Tin/Copper internal and external braid Tin/Copper internal and external braid Jacket Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Jacket none none Jacket none none Jacket Jacket Jacket none none none Jacket none Jacket Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com CA-2 E-Mail: [email protected] Conduit Assemblies Legacy Connector to Adapter Pre-Terminated Assemblies Series 72 & 74 Tubing & Series 75 Conduit CONNECTOR-TO-ADAPTER APPLICATIONS CONNECTOR DESIGNATORS (A-B-D-E-F-G-H-J-K-L-S) Product Series 750 = Series 75 Metal Core Conduit 740 = Series 74 Helical Convoluted Tubing5 720 = Series 72 Annular Convoluted Tubing Adapter Material 110 = Aluminum 111 = Brass 112 = Stainless Steel 113 = Nickel/ Aluminum/Bronze Jacket Type E - EPDM H - Hypalon Jacket N- Neoprene Jacket V - Viton Jacket X - No Jacket 750 N A Finish 110 F 20 Adapter A: Connector Designator A-D-F-G-H-J-K-L-S T = Transition, or N = Bulkhead Fiting M = 28840/22 Bushing O-RING (See Conduit Catalog Page A-13) M Adapter B Connector Shell Size Optional Tubing Material P = PFA T = PTFE K = PEEK E = ETFE Omit for FEP Style (1 or 2) Style 2 not available with N or T See Table II Conduit Type See Tables A THREAD Adapter A Connector Shell Size 1 T 24 - 24 - 36 - P Adapter B: Connector Designator A-D-F-G-H-J-K-L-S T = Transition, or N = Bulkhead Fiting M = 28840/22 Bushing Length In Inches3 Conduit Dash No.4 LENGTH (SEE NOTE 3) 1.69 (42.9) REF C OR D DIA (See Conduit Catalog Page A-13) ADAPTER A ADAPTER B 1.690 (42.9) REF DESIGNATOR M M28840/22 BUSHING Flat for D-Hole Mounting DESIGNATOR T TRANSITION FITTING DESIGNATOR N BULKHEAD FITTING © 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com CA-3 E-Mail: [email protected] Conduit Assemblies Legacy Connector to Adapter Pre-Terminated Assemblies Series 72 & 74 Tubing & Series 75 Conduit Table I: Thread Size Dash No. 06 08 09 10 12 14 16 20 24 28 32 40 48 56 64 80 96 Code B M N NF Z1 MT Availability 72 74 75 A Thread Class 2B B Max C Max 7/16 - 28 UNEF 1/2 - 20 UNF 9/16 - 24 UNEF 9/16 - 24 UNEF 5/8 - 24 UNEF 11/16 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1- 20 UNEF 1 3/16 - 18 UNEF 1 5/16 - 18 UNEF 1 1/2 - 18 UNEF 1 3/4 - 18 UNS 2 - 18 UNS 2 1/4 - 16 UN 2 3/4 - 16 UN 3 1/4 - 16 UN .640 (16.3) .640 (16.3) .690 (17.5) .690 (17.5) .760 (19.3) .890 (22.6) .890 (22.6) 1.024 (26.0) 1.152 (29.3) 1.363 (34.6) 1.488 (37.8) 1.676 (42.6) 1.960 (49.8) 2.210 (56.1) 2.460 (62.5) 2.930 (74.4) 3.460 (87.9) .188 (4.8) .250 (6.4) .281 (7.1) .312 (7.9) .375 (9.5) .438 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 1.750 (44.5) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) G Max (bulkhead size) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) Table II: Finish Finish Olive Drab over Cadmium Plate Electroless Nickel Olive Drab over Cadmium Plate over Nickel Olive Drab over Cadmium Plate over Electroless Nickel (500 hour salt spray) Passivate Nickel-PTFE Table III: Adapters and Transitions Part No. Ref. 710-100 Bulkhead Feed-Thru 710-114 – 117, -405 – 406 713-100 710-106 – 109, -370 – 371 710-077 Male and Female Pipe Thread Adapters Circular Connector Adapter Y and T Transitions Multibranch Transitions Series 75 Conduit Types Braided Shield Bronze Braid Inner: Bronze Braid Brass Outer: Tin/Copper Braid Inner: Bronze Braid, Ferrous Shield: Tin Plated Brass Iron/Copper (SnCuFe) Outer: Tin/Copper Inner: Bronze Braid, Brass 1st Outer: Tin/Copper Braid 2nd Outer: Tin/Copper Braid Stainless Steel Stainless Steel Nickel/Iron Stainless Steel Code Conduit A Brass B C D H J Code A B C D E F G Code A B C D Series 74 Tubing Types Tubing Braided Shield FEP, PFA, PTFE, none PEEK, or ETFE FEP, PFA, PTFE, Braided Black Dacron® PEEK, or ETFE FEP, PFA, PTFE, Tin/Copper, 1 layer PEEK, or ETFE FEP, PFA, PTFE, Tin/Copper, 1 layer PEEK, or ETFE FEP, PFA, PTFE, Tin/Copper, 2 layers PEEK, or ETFE FEP, PFA, PTFE, Tin/Copper, 2 layers PEEK, or ETFE FEP, PFA, PTFE, none PEEK, or ETFE Tubing Kynar® Kynar® Kynar® Kynar® E Kynar® F Kynar® Series 72 Tubing Types Braided Shield none Tin/Copper internal braid Tin/Copper external braid Tin/Copper external braid Tin/Copper internal and external braid Tin/Copper internal and external braid Jacket Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Jacket none none Jacket none none Jacket Jacket Jacket none none none Jacket none Jacket Notes 1. Metric dimensions (mm) are indicated in parentheses. 2. O-Ring not supplied with connector designator A. 3. Length tolerance is ± .250 (12.7) for lengths up to 24 inches (619.6 mm). Length tolerance for longer lengths is ± one percent (1%) of the length. 4. Consult factory for fittings using 3.000” (76.2) conduit. 5. Pre-terminated assemblies using product Series 74 will be supplied with FEP material, standard wall thickness, standard convolutions, tin copper braid, and neoprene jacket. For other options consult factory. 6. See section A for connector designator and interface information. © 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com CA-4 E-Mail: [email protected] Conduit Assemblies Legacy Connector to Connector Pre-Terminated Assemblies Series 72 & 74 Tubing & Series 75 Conduit CONNECTOR-TO-ADAPTER APPLICATIONS CONNECTOR DESIGNATORS (A-B-D-E-F-G-H-J-K-L-S) Product Series 750 = Series 75 Metal Core Conduit 740 = Series 74 Helical Convoluted Tubing5 720 = Series 72 Annular Convoluted Tubing Adapter Material 102 = Aluminum 103 = Brass 115 = Stainless Steel Jacket Type E - EPDM H - Hypalon Jacket N- Neoprene Jacket V - Viton Jacket X - No Jacket 750 N A Adapter B Connector Shell Size Style (1 or 2) Style 2 not available with N or T Finish See Table II 102 M Conduit Type See Tables F20 1 Conduit Dash No.4 A16 Adapter A Connector Shell Size O-RING A THREAD Optional Tubing Material P = PFA T = PTFE K = PEEK E = ETFE Omit for FEP 2 - 24 - 36 - P Style (1 or 2) Style 2 not available with N or T Length In Inches3 LENGTH 1.69 (42.9)MAX. REF. (See Conduit Catalog Page A-13) C OR D DIA (See Conduit Catalog Page A-13) ADAPTER A ADAPTER B Notes 1. Metric dimensions (mm) are indicated in parentheses. 2. Length tolerance is ± .250 (12.7) for lengths up to 24 inches (619.6 mm). Length tolerance for longer lengths is ± one percent (1%) of the length. 3. Consult factory for fittings using 3.000” (76.2) conduit. 4. Pre-terminated assemblies using product Series 74 will be supplied with FEP material, standard wall thickness, standard convolutions, tin/copper braid, and neoprene jacket. For other options consult factory. 5. See section A for connector designator and interface information. © 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com CA-5 E-Mail: [email protected] Conduit Assemblies Legacy Connector to Connector Pre-Terminated Assemblies Series 72 & 74 Tubing & Series 75 Conduit Table II: Finish Code Finish B Olive Drab over Cadmium Plate M Electroless Nickel N Olive Drab over Cadmium Plate over Nickel Olive Drab over Cadmium Plate over Electroless Nickel NF (500 hour salt spray) Z1 Passivate MT Nickel-PTFE B C D H J Code A B C D E F G Code A B C D © 2012 Glenair, Inc. Series 75 Conduit Types Braided Shield Bronze Braid Inner: Bronze Braid Brass Outer: Tin/Copper Braid Inner: Bronze Braid, Ferrous Shield: Tin Plated Brass Iron/Copper (SnCuFe) Outer: Tin/Copper Inner: Bronze Braid, Brass 1st Outer: Tin/Copper Braid 2nd Outer: Tin/Copper Braid Stainless Steel Stainless Steel Nickel/Iron Stainless Steel Code Conduit A Brass Series 74 Tubing Types Tubing Braided Shield FEP, PFA, PTFE, none PEEK, or ETFE FEP, PFA, PTFE, Braided Black Dacron® PEEK, or ETFE FEP, PFA, PTFE, Tin/Copper, 1 layer PEEK, or ETFE FEP, PFA, PTFE, Tin/Copper, 1 layer PEEK, or ETFE FEP, PFA, PTFE, Tin/Copper, 2 layers PEEK, or ETFE FEP, PFA, PTFE, Tin/Copper, 2 layers PEEK, or ETFE FEP, PFA, PTFE, none PEEK, or ETFE Tubing Kynar® Kynar® Kynar® Kynar® E Kynar® F Kynar® U.S. CAGE Code 06324 Series 72 Tubing Types Braided Shield none Tin/Copper internal braid Tin/Copper external braid Tin/Copper external braid Tin/Copper internal and external braid Tin/Copper internal and external braid Jacket Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Jacket none none Jacket none none Jacket Jacket Jacket none none none Jacket none Jacket Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com CA-6 E-Mail: [email protected]