Optoway TRSL-8340W-CXX0G 1 *********************************************************************************************************************************************************************** TRSL-8340W-CXX0G (RoHS Compliant) 3.3V / CWDM / 4.25 Gbps Digital Diagnostic SFF LC SINGLE-MODE TRANSCEIVER ********************************************************************************************************************************************************************** DESCRIPTION FEATURES l l l l l l l l l l l l l l The TRSL-8340-CXX0G series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as 4x/2x/1x Fibre Channel and 1000BASE-LX Gigabit Ethernet. This 2×7 pin SFF transceiver comply with the 2×5 standard package defined by the SFF MSA with the exception of four extra pins for real-time digital diagnostics and transmitter fault indication. Digital diagnostic functions are available via the 2-wire serial interface defined in the SFF-8472 MSA. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eighteen center wavelengths available from 1270 nm to 1610 nm, with each step 20 nm. A guaranteed minimum optical link budget of 18 dB is offered. The transmitter section uses a multiple quantum well CWDM DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. Up to 4.25 Gb/s Bi-directional Data Links Duplex LC Single Mode Transceiver Small Form Factor, RJ-45 size, 2×5 pin Package 18 Wavelength (λ): 1270 nm to 1610 nm CWDM DFB LD Transmitter 18 dB Power Budget at Least SFF-8472 Digital Diagnostic Function AC/AC Coupled Signal Input / Output LVTTL Transmitter Disable Input LVTTL Signal Detect Output Single +3.3 V Power Supply RoHS Compliant 0 to 70oC Operation Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC-60825 Compliant APPLICATIONS l Tri-rate 1.063/2.125/4.25 Gb/s Fibre Channel l 1.25 Gb/s 1000 BASE-LX Gigabit Ethernet LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. Bit Rate (Gb/s) FC-PI Power Budget (dBm) Wavelength (nm) Package Temp. (oC) TRSL-8340W-CXX0G 4/2/1 400/200/100 > 18 CWDM 2×7 LC with DMI 0 to 70 CWDM* Wavelength (0 to 70oC) Central Min. Typ. Wavelength (nm) (nm) -C270 -C290 -C310 -C330 -C350 -C370 -C390 -C410 -C430 1264.5 1284.5 1304.5 1324.5 1344.5 1364.5 1384.5 1404.5 1424.5 1270 1290 1310 1330 1350 1370 1390 1410 1430 TX Power RX Sens. (dBm) (dBm) 4 to 0 RoHS Compliant -18 Yes Max. (nm) Central Wavelength Min. (nm) Typ. (nm) Max. (nm) 1277.5 1297.5 1317.5 1337.5 1357.5 1377.5 1397.5 1417.5 1437.5 -C450 -C470 -C490 -C510 -C530 -C550 -C570 -C590 -C610 1444.5 1464.5 1484.5 1504.5 1524.5 1544.5 1564.5 1584.5 1604.5 1450 1470 1490 1510 1530 1550 1570 1590 1610 1457.5 1477.5 1497.5 1517.5 1537.5 1557.5 1577.5 1597.5 1617.5 CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2/1/2007 V1.0 Optoway TRSL-8340W-CXX0G 2 *********************************************************************************************************************************************************************** Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Soldering Temperature Power Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Recommended Operating Conditions Parameter Symbol Power Supply Voltage Vcc Operating Temperature Topr Data Rate Power Supply Current Icc Min -40 0 0 GND 0 Min 3.13 0 1 Max 85 70 260 4.5 Vcc 30 Units o C o C o C V V mA Typ 3.3 Max 3.47 70 4.25 200 Notes 10 seconds on leads only Units / Notes V o C / air flow 1m/sec Gb/s mA 300 Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Optical Optical Transmit Power Optical Modulation Amplitude @4.25 Gb/s Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Optical Rise Time Relative Intensity Noise Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Disable Input Voltage -- Low Disable Input Voltage -- High Shut Off Time for TxDis Symbol Min Typ Max Units Notes Po 0 --- 4 dBm 1 OMA 1200 λ ∆λ SMSR tr / tf RIN λc –5.5 IIL IIH VIH - V IL VIL - V CC VIH - V CC VTDIS,L VTDIS,H tDIS -350 µW λc --30 λc +7.5 1 90 -118 350 300 -2.0 -1.1 0 Vcc – 1.3 -1.58 -0.74 0.5 Vcc 1 nm nm dB ps dB/Hz µA µA mV V V V V ms 2 -20 dB width 20% to 80% Values 2 2 TX Output Enabled TX Ouput Disabled 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm. 3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2/1/2007 V1.0 Optoway TRSL-8340W-CXX0G 3 *********************************************************************************************************************************************************************** Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3. 47V) Parameter Symbol Min Typ Sen1 --- --- Pin Pa Pd 0 ---31 1.0 1260 --------- Max Units Notes 29 -18 ---18 --- µW dBm dBm dBm dBm dB nm 3 4 Optical Sensitivity @ 4.25 Gb/s Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Data Output Voltage – Low Data Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High VOL - VCC VOH - VCC VOL VOH -2.0 -1.1 2.0 1600 -1.58 -0.74 0.5 V V V V Transition: low to high Transition: high to low 5 5 7 3. Measured at PRBS 2 -1 at BERT 1E-12. 4. Represents sensitivity based on OMA spec, as corrected to incoming Extinction Ratio of 9 dB. For example, an OMA of 29 µW is approximately equal to an average power of -17.3 dBm, average with an Extinction ratio of 9 dB. 5. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2/1/2007 V1.0 Optoway TRSL-8340W-CXX0G 4 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM MS 5 4 3 2 1 A C TOP VIEW 6 7 8 9 10 B D PIN C A 1 2 3 4 5 Signal Name MS MS N/C SDA VeeRx VccRx SD RDRD+ MS Description PIN D B 10 9 8 7 6 Not Connected Data line of two wire serial interface Rreceiver ground Receiver Power – 3.3V±5% Signal Detect Output Receiver Data Out Bar Receiver Data Out Mounting Studs. Connect to Chassis Ground Signal Name Description TX_Fault SCL Transmitter Fault Indication Clock line of two wire serial interface Transmitter Data In Bar Transmitter Data In Logic low to enable TXoutput Transmitter ground Transmitter Power – 3.3V±5% TDTD+ TX_Disable VeeTx VccTx Module Definition MOD-DEF2 PIN A SDA Module Definition 4 MOD-DEF1 PIN B SCL MOD-DEF0 Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector (NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components. Recommended Circuit Schematic Vee TX 7 TX_Disabl e 8 TX_Fault D TX_Disabl e TX_Fault 4.7K to 10KΩ TD+ 9 LD Driver TD+ Z=50Ω 100Ω TD- 10 VccTX TD1μH Z=50Ω 6 VCC 3.3V 10nF 10μF 10nF 10μF 1μH VccRX SerDes IC 2 10nF 10μF RD- 4 Protocol IC RDZ=50Ω 100Ω POST Amp RD+ 5 RDZ=50Ω Dependi ng on SerDes SD 3 Signal Dete ct 4.7K to 10KΩ EEPORM Vee RX 1 SCL B SDA A N/C C SCL SDA 4.7K to 10KΩ 4.7K to 10KΩ VCC 3.3V SFF Module *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2/1/2007 V1.0 Optoway TRSL-8340W-CXX0G 5 *********************************************************************************************************************************************************************** PACKAGE DIAGRAM (Units in mm) A) Standard Case TRSL-8340W-CXX0G B) Extended Case TRSL-8340W-CXX0EG Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2/1/2007 V1.0