Optical Encoders SERIES 62R 1/2'' Package, Redundant Circuitry FEATURES •Redundant Circuitry •1 Million Rotational Cycles •Compatible with CMOS, TTL and HCMOS Logic • Optional Integral Pushbutton •Available in 12, 16, and 24 Detent Positions •Choices of Cable Length and Terminations •Ideal for Critical Applications APPLICATIONS •Cockpit Controls •Medical Equipment 4.000±.20 (4.000±5,08) 3/8-32 UNEF-2A THREAD.TO BE WITHIN .030 (0,76) OF SHOULDER GRAYHILL .100 (2,54) STRIPPED AND TINNED .250±.002 (6,35±0,05) DIA. 10 9 8 7 6 5 4 3 2 1 GRAYHILL .230±.050 (5,84±1,27) 10 9 8 7 6 5 4 3 2 1 .250±.005 (6,35±0,13) 28 AWG CABLE WIRES ON .050 (1,27) CENTER Cable Version Pin Version .152±.005 (3,86±0,13) .066±.005 (1,68±0,13) .312±.005 (7,92±0,13) .490±.010 (12,45±0,25) .360±.010 (9,14±0,25) .815±.015 (20,70±0,38) XXXX X-X .540±.010 (13,72±0,25) 62RXXXX-XX-XXXC Optical and Mechanical Encoders DIMENSIONS in inches (and millimeters) CONNECTOR IS AMP P/N 1-215083-0 .460±.010 (11,68±0,25) .580±.010 (14,73±0,25) .250±.005 (6,35±0,13) .375±.015 (9,53±0,38) .219±.004 (5,56±0,1) .250±.005 (6,35±0,13) .855±.020 (21,7±0,51) .933(23,69) REF. .500±.010 (12,7±0,25) .700±.010 (17,78±0,25) Unless otherwise specified, standard tolerances are ±0.10 (0,25) Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical Encoders CIRCUITRY, TRUTH TABLE, AND WAVEFORM Standard Quadrature 2-Bit Code Switch Schematic PIN # DECK B POWER 5V 10 DECK A POWER 5V 9 R* DECK A OUTPUT "A" R* DECK A OUTPUT "B" DECK B OUTPUT "A" DECK B OUTPUT "B" R* R* PUSHBUTTON N.O. Truth Table (CW Rotation) DECK A DECK B POSITION OUTPUT "A" OUTPUT "B" OUTPUT "A" OUTPUT "B" 1 2 3 4 8 7 INDICATES LOGIC HIGH. BLANK INDICATES LOGIC LOW. CODE REPEATS EVERY 4 POSITIONS 6 5 Wave Form (CW Rotation) 4 OUTPUT "A" DECK A 3 DECK A GROUND 2 DECK B GROUND 1 DECK B * 2.2k EXTERNAL PULL-UP RESISTORS REQUIRED FOR OPERATION HIGH LOW HIGH OUTPUT "B" LOW HIGH OUTPUT "A" LOW HIGH OUTPUT "B" LOW POS. #1 SPECIFICATIONS Pushbutton Switch Ratings Switch Ratings Coding: 2-bit quadrature coded output Operating Voltage: 5.0 ±.25 Vdc Voltage Breakdown: 250 Vac between mutually insulated parts Supply Current: 30 mA [email protected] Vdc (per deck) Logic Output Characterisitics: Logic High: 3.5 Vdc minimum Logic Low: 1.5 Vdc maximum Mechanical Life: 1,000,000 cycles minimum (One cycle is a rotation through all positions and a full return) Minimum Sink Current: 2.0 mA Power Consumption: 150mW max. (per deck) Output: open collector phototransistor Optical Rise and Fall Times: less than 30 mS maximum Environmental Ratings Operating Temperature Range: -40°C to 85°C Storage Temperature Range: -55°C to 100°C Vibration Resistance: Harmonic motion with amplitude of 15G's, within a varied 10 to 2000 Hz frequency for 12 hours Mechanical Shock: Test 1: 100g, 6 mS, half sine, 12.3 ft/s; Test 2: 100g, 6 mS, sawtooth, 9.7 ft/s Humidity: 90–95% at 40°C for 96 hours Materials and Finishes Shaft: Aluminum Bushing: Zinc casting Shaft Retaining Ring: Stainless steel Detent Spring: Stainless steel Printed Circuit Boards: NEMA grade FR-4 gold over nickel or palladium Terminals: Brass, tin-plated POS. #3 POS. #4 POS. #5 POS. #6 Mounting Hardware: One brass, nickel-plated nut and zinc-plated spring steel with clear trivalent chromate finish lockwasher supplied with each switch. (Nut is 0.094 inches thick by 0.433 inches across flats) Rotor: Thermoplastic Code Housing: Thermoplastic Pushbutton Dome: Stainless steel Dome Retaining Disk: Thermoplastic Pushbutton Housing: Thermoplastic Phototransistor: Planar Silicon NPN Infrared Emitter: Gallium aluminum arsenide Pushbutton Contact: Brass, nickel-plated Flex Cable: 28 AWG stranded, halogen-free polyolefin insulation on .050" centers (cabled version) Header Pins: Phospher bronze, tin-plated Spacer: Zinc casting Backplate/Strain Relief: Stainless steel Studs: Stainless steel OPTIONS Contact Grayhill for custom terminations, shaft and bushing configurations, and resolutions. Control knobs are also available. ORDERING INFORMATION 62R22-01-040S Series Angle of Throw: 15 = 15° or 24 pos, 22 = 22.5° or 16 positions, 30 = 30° or 12 Positions Pushbutton Option: 01 = w/o pushbutton, 02 = with pushbutton Termination: .050" centers; S = Stripped cable, C = Connector, P = Pin Cable Length: 040 = 4.0 inches. Cable is terminated with Amp Connector P/N 215083-8. See Amp Mateability Guide for mating connector details. *Eliminate cable length if ordering pins. (Ex: 62R22-02-P) Custom materials, styles, colors, and markings are available. Control knobs available. Available from your local Component Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor, or Grayhill. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical and Mechanical Encoders Pushbutton Rating: 10 mA, 5 Vdc, resistive Contact Resistance: less than 10 ohms (TTL or CMOS compatible) Pushbutton Life: 3 million actuations min. Contact Bounce: less than 4 mS at make and less than 10 mS at break Actuation Force: 1000 ±300 grams Pushbutton Travel: .010/.025" Operating Torque: 3.5 ±1.4 in-oz initially Shaft Push Out Force: 45 lbs minimum Mounting Torque: 15 in-lbs max. Terminal Strength: 15 lbs cable pull-out force min. Operating Speed: 100 RPM max. POS. #2