HWS531 GaAs 0.5-6 GHz SPDT Terminated Switch May 2015 V2 Features • 50 USON6L (1.5x1.5X0.4 mm) Terminated Switch • Low Insertion Loss: 0.70 dB @ 2.7 GHz HP 0.90 dB @ 3.8 GHz 1.10 dB @ 5.8 GHz • Isolation: 31.0 dB @ 2.7 GHz 28.0 dB @ 3.8 GHz 25.0 dB @ 5.8 GHz • Low DC Power Consumption • Miniature USON6L (1.5x1.5x0.4 mm) Using Lead (Pb) free materials with RoHS compliant • PHEMT process Pin Out (Top View) Description The HWS531 is a GaAs PHEMT MMIC SPDT switch with 50 termination operating at 0.5 -6.0 GHz in a low cost miniature USON6L (1.5x1.5x0.4 mm) plastic lead (Pb) free package. The HWS531 features low insertion loss and high isolation with very low DC power consumption. This switch can be used in WiMAX or IEEE 802.11a/b/g/n WLAN PC card and access point applications as transmit/receive switch, antenna diversity switch, or band-selection switch. Absolute Maximum Ratings Parameter Note: 1. DC blocking capacitors CB=8pF are required on all RF ports for operating frequency > 2GHz. 2. CB=47pF for operating frequency < 2GHz. 3. Exposed pad in the bottom must be connected to ground by via holes. Absolute Maximum Logic Table for Switch On-Path RF Input Power +40 dBm @ +3V Control Voltage +6V VC1 VC2 RFC-RF1 RFC-RF2 Operating Temperature -40°C to +85°C 1 0 On Off Storage Temperature -65°C to +150°C 0 1 Off On Electrostatic Discharge Machine Model Hexawave Inc. Class M1 ‘1’ = +2.5V to +5V ‘0’ = 0V to +0.2V 2 Prosperity Road II, Science Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice. HWS531 GaAs 0.5-6 GHz SPDT Terminated Switch May 2015 V2 Electrical Specifications at 25°C with 0, +3V Control Voltages Parameter Test Conditions Insertion Loss 0.50-6.00 GHz 0.50-2.70 GHz 2.70-3.80 GHz 3.80-5.85 GHz Isolation 0.50-6.00 GHz 0.50-2.70 GHz 2.70-3.80 GHz 3.80-5.85 GHz Return Loss (On Port) Return Loss (Off Port) Min. Typ. Max. Unit 1.10 0.70 0.90 1.10 0.90 1.10 1.30 dB dB dB dB 25.0 31.0 28.0 25.0 dB dB dB dB 0.50-6.00 GHz 11 dB Isolated output RF1 or RF2: 2.30-2.70 GHz 2.70-3.80 GHz 4.90-5.85 GHz 12 15 15 dB dB dB 2.5 GHz @0/+3V 39 dBm Second Harmonic Pin=25 dBm -75 dBc Third Harmonic Pin=25 dBm -75 dBc Switching Time 10% to 90%, 90% to 10% RF 300 ns Control Current @+3V 5 Input Power for One dB Compression 28.0 25.0 20.0 100 uA Note: All measurements made in a 50 ohm system with 0/+3.0V control voltages, unless otherwise specified. Typical Performance Data with 8pF Capacitors @ +25°C RF1/RF2 (Off State) Return Loss vs. Frequency -5 -5 -10 -10 Return Loss(dB) Return Loss(dB) RFC/RF1/RF2 (On State) Return Loss vs. Frequency -15 -20 -25 -30 -35 -15 -20 -25 -30 -35 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency(GHz) Frequency(GHz) Hexawave Inc. 2 Prosperity Road II, Science Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice. HWS531 GaAs 0.5-6 GHz SPDT Terminated Switch May 2015 V2 Typical Performance Data with 8pF Capacitors @ +25°C RFC RF1/RF2 Insertion Loss vs. Frequency RFC RF1/RF2 Isolation vs. Frequency -15 -20 Isolation(dB) Insertion Loss(dB) 0 -0.3 -0.6 -0.9 -1.2 -25 -30 -35 -40 -1.5 -45 -1.8 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency(GHz) Frequency(GHz) Hexawave Inc. 2 Prosperity Road II, Science Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice.