maxiGRIPTM Clearance Guidelines ATS-MAXIGRIP_CLEARANCE_GUIDELINES-R0 PATENT PENDING OR PATENT 6308771 Required Board Keep Out Region for maxiGRIPTM Heat Sink Attachment Hardware 7 8 5 6 4 Advanced Thermal Solutions, Inc PROPRIETARY DE R0 ORIG NOTES: 1. ALL DIMENSIONS ARE IN MM. 2. FOR LAYOUT & DIMENSION SPECIFIC TO THE LEGACY REFER TO SHEET 2 NOM SIZE XA3. ADDITIONAL XB XCCONSTRAINS YA YB YC IF / WHEN HEAT MAY APPLY ARE USED WITH LENGTH / WIDTH DIMENSION THAT EX THE XA & YA DIMENSION SHOWN IN THE TABLE. PLEA 17 x17 23.0 CONTACT 31.0 NA 23.0 ENGINEER 23.0 11.0 ATS DESIGN FOR THESE APPLIC YC 19 x 19 27.0 31.0 21 x 21 29.0 33.0 2.5 29.0 33.0 REQUIRED BOARD KEEP8.0 OUT REGION FO maxiGRIP HEAT 32.5 36.5 2.5ATTACHMENT 32.5 36.5 HARDWARE 8.0 SINK 23 x 23 25 x 25 27 x C 34.0 38.0 2.5 2.5 FRAME SPRING NOM 27CLIP 36.0 CLIP 40.0 SIZE 2.5 27.0 31.0 34.0 38.0 8.0 8.0 XA XB 36.0 40.0XC8.0 YA FC17038.5SC62 29 x 29 42.5 17.0 2.5 23.0 38.5 31.0 42.5NA8.023.0 YA YB 2 REV. OF AIR FLOW DIRECTIONDIRECTION OF AIR FLOW D 3 30 x 31 x 32.5 x 33 x 35 x B 37.5 x 40 x XC XA XB 42.5 x FC190 SC190 30 44.0 FC21040.0SC210 FC230 SC230 31 45.0 FC25041.0SC250 FC270 SC270 32.5 43.0 47.0 FC290 SC290 FC30043.5SC300 33 47.5 FC310 SC310 35 49.5 FC32545.5SC325 FC330 SC330 37.5 48.5SC350 52.5 FC350 FC37552.0SC375 40 56.0 FC400 SC400 42.5 54.5 58.5 FC425N SC425N FC450N SC450N 45 x 45 57.0 61.0 19.0 2.5 21.0 23.0 2.5 25.0 27.0 2.5 29.0 30.0 2.5 31.0 2.5 32.5 33.0 2.5 35.0 37.5 2.5 40.0 2.5 42.5 45.0 2.5 27.0 40.0 29.0 32.5 41.0 34.0 36.0 43.0 38.5 40.0 43.5 41.0 45.5 43.0 43.5 48.5 45.5 48.5 52.0 52.0 54.5 54.5 57.0 31.0 2.5 27.0 44.0 2.58.029.0 33.0 36.5 2.5 32.5 45.0 2.58.034.0 38.0 40.0 47.0 2.58.036.0 42.5 2.5 38.5 44.0 47.5 2.58.040.0 45.0 2.5 41.0 49.5 2.58.043.0 47.0 47.5 2.5 43.5 52.5 8.0 49.5 2.5 45.5 52.5 56.0 2.58.048.5 56.0 2.5 52.0 58.5 2.58.054.5 58.5 61.0 2.5 57.0 57.0 61.0 8.0 YB 23.0 31.0 33.0 36.5 38.0 40.0 42.5 44.0 45.0 47.0 47.5 49.5 52.5 56.0 58.5 61.0 1 This confidential do Advanced Thermal reproduce or distrib to other parties with A DWN: DESIGNER: Advanced Thermal Solutions, Inc CDM CDM 89 Access Road #27 Norwood MA, 02062 DESCRIPTION: APPROVED /RELEASED FOR ATS MANUFACTURE: WG 06/29/2007 SCALE: DATE: TOLERANCE: PWB CLEARANCE GUIDELINES FOR maxiGRIP 8 7 DWG. NO. 06/29/2007 NTS 6 SEE TABLE 5 NOTES: 1. Additional constraints may apply if / when heat sinks are used with length or width dimensions that exceed the XA and YA dimensions shown in the table. Please contact ATS for assistance with such applications. 2. Data provided for reference only and may vary by application. 3. ATS reserves the right to update or change its products without notice to improve the design or performance. 4. Contact ATS to learn about custom options available. 4 ATS-MAXIGRIP_CLEARANCE_GUIDEL FINISH: MATERIAL: NA NA 3 2 For more information, to find a distributor or to place an order, call 781.769.2800, email [email protected], or visit www.qats.com R3_1113