RoHS 1X4 RJ45 Connector AR14-4164IR 10/100 Base-T Ethernet Application PoE to meet IEEE802.3af Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Industrial Temp: -40ºC to +85ºC Suitable for IR Reflow Storage temperature range: -40ºC to +85ºC Electrical Specifications @ 25°C Part Number AR14-4164IR OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Turns Ratio chip: cable (±2%) 1:1 Insertion Loss (dB Max) 1-100MHz -1.0 1-30MHz -18 Return Loss (dB Min) 30-60MHz -18-20Log(F/30MHz) 60-80MHz -12 Electrical Specifications @ 25°C CMR CDMR Cross Talk HI-POT (dB Min) (dB Min) (dB Min) (Vrms) 0.5-1MHz 10MHz 30MHz 50MHz 100MHz 0.3-1MHz 10MHz 30MHz 60MHz 100MHz 0.3-1MHz 10MHz 30MHz 60MHz 100MHz 1.0mA/3Sec. -50 -50 -30 1500 -47 -42 -30 -45 -50 -50 -40 -35 -37 -50 -50 -40 All specifications subject to change without notice. MECHANICAL 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 1507/17/2015 www.alliedcomponents.com RoHS 1X4 RJ45 Connector SCHEMATICS AR14-4164IR PCB LAYOUT SUGGESTED PANEL OPENING NOTE: The distance of panel inside surgace relative to front surface part is only a suggestion. In case this distance is different, the required panel opening dimensions change accordingly. NOTES 1. Shield- 0.20mm THICKNESS BRASS C2680 H. PLATING NICKEL 20u” MIN. 2. HousingStandard Material Nylon 66, Glass filled Polyester UL94V-0 Standard Color Black. 3. RJ Terminal- Plastic: PBT UL94V-0, Standard Color Black. Pin: 0.35mm Thickness Phos-Bronze C5210 EH. Plating: Nickel 40u"-60u" for all and Sn 100%, and 6u” Gold Plating. 4. Input Terminal- Plastic: PBT, Glass Filled, UL94V-0, Standard Color Black. Pin: 0.35mm SUS430. Plating: Nickel 40u"-60u" for all and Sn 100%. 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 07/17/2015 15 www.alliedcomponents.com