RoHS SMAC10 & 15 Surface Mount Air Core Inductors Dimensions: SMAC10 Inches (mm) SMAC15 .159±0.01 (4.04±0.30) .087± .01 (2.2±0.25) .056±.005 (1.42±0.13) .056±.005 (1.42±0.13) 0.144±0.012 0.072±0.01 (1.83±0.25) (3.66±0.30) .054±.006 (1.37±0.15) .054±.006 (1.37±0.15) Features • • • • • 0.035±0.01 (0.89±0.25) 0.035±0.01 (0.89±0.25) Small low profile air core design Excellent for high Q applications High SRF’s for high frequency applications Available in tight tolerances Flat top cap for pick and place assembly Nominal Footprint SMAC10 SMAC15 Electrical 0.040 (1.02) Impedance range: 1.65nH to 12.55nH Tolerance: 1.65nH 10% only, 2.55nH available in 5%, 3.85nH to 12.55nH available in 2% Test Frequency: 800Mhz Operating Temp: -40ºC to +125ºC 0.097 (2.46) 0.040 (1.02) 0.097 (2.46) 0.031 (0.79) 0.031 (0.79) 0.113 (2.87) 0.041 (1.04) Test Equipment (L/Q): HP4291B with HP16193 (SRF): HP8753E or HP8720D Tinned Length Physical 90° Max. Packaging: 1000 pieces per 7” reel 2000 pieces per 7” reel for SMAC15-10( )-RC only Marking: None 0° Min. Allied Part Number Turns Inductance (nh) Q Min. Test Freq. (MHz) SRF Min. (GHz) DCR Max. (mΩ) IDC A (Max.) SMAC10-2K-RC 2 1.65 100 800 10.2 4.0 1.6 SMAC10-3J-RC 3 2.55 100 800 8.2 5.0 1.6 SMAC10-4( )-RC 4 3.85 100 800 7.5 6.0 1.6 SMAC10-5( )-RC 5 5.45 100 800 7.0 8.0 1.6 SMAC15-6( )-RC 6 5.60 100 800 6.5 9.0 1.6 SMAC15-7( )-RC 7 7.15 100 800 6.0 10.0 1.6 SMAC15-8( )-RC 8 8.80 100 800 6.0 12.0 1.6 SMAC15-9( )-RC 9 9.85 100 800 5.2 13.0 1.6 SMAC15-10( )-RC 10 12.55 100 800 4.6 14.0 1.6 To complete part number insert tolerance designator: G = ±2%, J = ±5%, K = ±10% All specifications subject to change without notice. 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 09/23/2015 www.alliedcomponents.com