RoHS Radial High Current Chokes RHC50 A Dimensions (In.) B See Table C D E Allied Part Number Inductance Rated Current (µh) Max. A DCR Max. (Ω) SRF Min. (MHz) Increment Current (A) A Max. (In.) B Max. (In.) C Max. (In.) D AWG E + /.063 Features • Radial leads for direct Printed Circuit RHC50-3-5R0K-RC 5 3 .015 40 19 .875 .625 1.125 18 500 RHC50-3-100K-RC 10 3 .081 25 17 1.125 .625 1.125 18 .687 RHC50-3-270K-RC 27 3 .035 8 15 .875 .812 1.125 18 .437 RHC50-3-500K-RC 50 3 .050 5 12 1.125 .812 1.125 18 .750 RHC50-3-101K-RC 100 3 .065 2.5 8 1.125 .812 1.125 18 .937 RHC50-3-151K-RC 150 3 .075 2.0 5 1.375 .812 1.125 18 1.062 RHC50-3-251K-RC 250 3 .090 1.0 3 1.625 .812 1.125 18 1.312 RHC50-5-5R0K-RC 5 5 .012 30 20 .875 .640 1.125 18 .750 RHC50-5-100K-RC 10 5 .015 20 18 1.123 .640 1.125 16 1.00 RHC50-5-270K-RC 27 5 .025 7 15 .875 .875 1.125 16 .559 RHC50-5-500K-RC 50 5 .030 4 10 1.123 .875 1.125 16 .750 RHC50-5-680K-RC 68 5 .035 3.5 9 1.123 .875 1.125 16 .875 RHC50-5-101K-RC 100 5 .050 2.5 7 1.375 .875 1.125 16 1.00 RHC50-5-151K-RC 150 5 .060 2.0 5 1.625 .875 1.125 16 1.25 RHC50-8-151K-RC 150 8 .060 2.0 8 1.625 .880 1.125 16 1.25 Electrical RHC50-10-5R0K-RC 5 10 .010 30 19 1.123 .687 1.125 14 .812 Inductance: Measured at 1 KHz with no RHC50-10-100K-RC 10 10 .012 20 17 1.375 .687 1.125 14 1.22 DC current. Incremental current reduces RHC50-10-270K-RC 27 10 .018 7 15 1.123 .937 1.125 14 .687 RHC50-10-500K-RC 50 10 .025 4 9 1.375 .937 1.125 14 1.22 RHC50-10-680K-RC 68 10 .027 3.5 8 1.375 .937 1.125 14 1.123 RHC50-10-101K-RC 100 10 .030 2.5 6 1.625 .937 1.125 14 1.312 RHC50-15-5R0K-RC 5 15 .008 30 20 1.375 .725 1.125 12 .937 RHC50-15-100K-RC 10 15 .010 20 17 1.687 .725 1.125 12 1.50 RHC50-15-270K-RC 27 15 .015 7 14 1.375 1.00 1.125 12 .937 RHC50-15-500K-RC 50 15 .020 4 9 1.625 1.00 1.125 12 1.123 Board mounting. • Pre-tinned leads. • Inductance range from 5µh to 250µh. Also available in non-standard inductance values. • Current rating range from 3 Amps to 15 Amps. • Ideal for use in switching power supplies, filter networks and power amplifiers. inductance by 10% or less. Tolerance: 10% over entire inductance range. Available in tighter tolerances. Operating Temp: -55º +105ºC All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 03/12/13 www.alliedcomponents.com